fuse MITSUBISHI ASX 2020 Owner's Manual (in English)

No.Sym-bolElectrical sys- temCa-
pacity35—Spare fuse20 A*1 : Fusible linkNo.Sym-
bolElectrical sys- temCa-
pacity1Battery current
sensor7.5 A
z Some fuses may not be installed on your
vehicle, depending on the vehicle model
or specifications.
z The table above shows the main equip-
ment corresponding to each fuse.
The fuse box does not contain spare 7.5 A ,
25 A or 30 A fuses. If one of these fuses burns out, substitute with the following fuse.7.5 A: 10 A spare fuse
25 A: 20 A spare fuse
30 A: 30 A audio system amp fuse
When using a substitute fuse, replace with a
fuse of the correct capacity as soon as possi- ble.
Identification of fuseCapacityColour7.5 ABrown10 ARed15 ABlue20 AYellow25 ANatural (White)30 AGreen (fuse type)/Pink (fusible link type)40 AGreen (fusible link type)Fuse replacement
1. Before replacing a fuse, always turn off
the electrical circuit concerned and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
2. Remove the fuse puller (A) from the in-
side of the fuse box in the engine com-
partment.
3. Referring to the fuse load capacity table,
check the fuse pertaining to the problem.
B- Fuse is OK
C- Blown fuse
Fuses
10-222*$(20(1Maintenance10Sub fuse block*