jacking points MITSUBISHI COLT 2008 Owner's Manual (in English)
Page 314 of 450
6-24 For emergencies
6
6. Place the jack under one of the jacking points (C) shown
in the illustration. Use the jacking point closest to the tyre
you wish to change. 7. Holding the jack in position by hand, turn the handle until
the flange portion (D) fits in the groove (E) at the top of
the jack.
WARNING!
● Set the jack only at the positions shown here. If the
jack is set at a wrong position, it could dent your
vehicle or the jack migh t fall over and cause per-
sonal injury.
● Do not use the jack on a tilted or soft surface.
Otherwise, the jack migh t slip and cause personal
injury. Always use the jack on a flat, hard surface.
Before setting the jack, make sure there are no sand
or pebbles under the jack base.