engine MITSUBISHI ECLIPSE 2003 Service Owner's Guide

AC106472
CONNECTORS<3.0L ENGINE WITH
VARIABLE INDUCTION SYSTEM>: B-36,
B-39
AB
DEVICE SIDE
B-39
B-39
B-36
B-36
AC002955AB
AC001243
AB

AC106438AB
2.4L ENGINE
3.0L ENGINE <WITHOUT VARIABLE INDUCTION CONTROL (VIC) SYSTEM>
S007
S008S009
S010S011
S012
S013S014
S015S018
S019
S020
S021
S022
S023
S024
S025
S026
S027
S028 S029S030
S031
S032S033
S034
S035S036
S037
S038
S047S042
S043
S044 S016
S017
S039
S040
S041
S045
S046
S048

AC106439AB
3.0L ENGINE <WITH VARIABLE INDUCTION CONTROL (VIC) SYSTEM>
S028 S029S049
S050
S051S052
S053
S054
S047S042
S058
S059
S060
S055
S056
S057
S061
S062
S048

AC106441AB
S119
S120S121
S122S125
S126
S127
S128
S129
S130
S131
S132
S133
S213
S140
2.4L ENGINE
S123
S124
S134 S137
S135 S138
S136 S139

AC106441AC
S141S142
S143S146
S147
S148
S149
S150
S151
S152
S153
S154
S155
S156
S213
S164
S165
3.0L ENGINE <WITHOUT VARIABLE INDUCTION CONTROL (VIC) SYSTEM>
S144
S145
S157 S161
S158 S162
S159 S163
S160

AC106441AD
S141 S166S168
S169
S149
S150
S151
S152
S153
S154
S155
S213
S174 S178
S175 S179
S176 S180
S177 S181
3.0L ENGINE <WITH VARIABLE INDUCTION CONTROL (VIC) SYSTEM>
S167
S170 S172
S171 S173

AC106603
Indicates power source.
Indicates that terminal is conne-
cted via a plate in the relay box.
Each circuit diagram consists of
block(s). The blocks are divided
by page number.
Indicates splice point numbers.
These numbers are identical to
those described in &#34;Splice Loca-
tions.&#34;
Indicates the circuit name to be
connected. The arrow indicates
the current flow direction.
Indicates the power suppply in
the control unit. If no voltage is
displayed, this indicates battery
positive voltage.
An &#34;X&#34; at the end of a connector
number indicates that the conn-
ector is connected to a central-
ized junction that is shown in the
section &#34;Centralized Junction.&#34;
Indicates the connector symbol.
Connectors in the circuit diagram
are indicated in numerical order.
Indicates the operating conditions
of the engine coolant switch, etc.
Indicates connector number.
The same number as used in the
wiring harness diagram.
Connector and connector numbers
are shown at the lower part of the
page.
Connector numbers not enclosed
by frame indicate the device incor-
porated into wiring harness.
Indicates the circuit mame
to be connected. The arrow
indicatesthe current flow
direction.
Indicates that the diagram contin-
ues at which belongs to the
block in the same circuit.
AB
Indicates shield wire.Indicates that current
flows upwards.

AC106661AB
(RELAY BOX IN ENGINE COMPARTMENT)
FRONT OF VEHICLE1
234
5 25
6
7
8910111213
14 15 24
16
1718
1920
2123 22
AC106662AB
26
27
(CONNECTED DIRECTLY TO
BATTERY POSITIVE TERMINAL)(CONNECTED IN FRONT
OF THE RELAY BOX)

AC106661
(RELAY BOX IN ENGINE COMPARTMENT)
AC
A-05X
A-09XA-04XA-06X A-07X A-08X
A-10X
A-11X
FRONT OF VEHICLE
1 2
3 41 2
3 41 2
3 41 2
3 41 2
3 4
1
23 41
21791011
22
23 2425 26 27 28 29
3031
423568
AC106656
A-13XA-14XA-15X A-16X
A-17XA-18X
A-19X
A-12X
AB
FRONT OF VEHICLE1 2
3 41 2
3 41 2
3 41 2
3 41 2
3 41 2
3 4
12 3
4 1
5

AC005107
1 4
5
867 9
12
84 4
131010
11 83 2
N
AB
<2.4L ENGINE>
<3.0L ENGINE>4.9 ± 1.0 Nꞏm
44 ± 8 in-lb 12 ± 2 Nꞏm
100 ± 22 in-lb