sensor MITSUBISHI ECLIPSE 2003 Service Repair Manual

AC106563AC
CONNECTOR: C-28
C-28
AC106473
CONNECTOR: C-77
AL
1
12
232
13
243
14
254
15
265
16
276
17
287
18
298
19
309
20
3110
21
3211
22
33
DEVICE SIDE
AC002044
VEHICLE SPEED
SENSOR CONNECTOR
(HARNESS SIDE)
B-39
AE

AC106563AC
CONNECTOR: C-28
C-28
AC002045
VEHICLE SPEED
SENSOR CONNECTOR
(HARNESS SIDE)
B-39
AD

AC002046
VEHICLE SPEED
SENSOR CONNECTOR
(HARNESS SIDE)
B-39
AD

AC102625
AC
Ambient Temperature Sensor Circuit
AC106465
CONNECTOR: A-29
AX
AC106552AK
CONNECTOR : C-09
AC106477
CONNECTOR: C-89
AD
CONNECTOR BLOCK (LH)

AC106590
AB
Vehicles Speed Sensor Circuit
AC106467
CONNECTOR<2.4L ENGINE>:
B-36, B-39
AI
B-39
B-36
AC106471
CONNECTORS <3.0L ENGINE WITH
VARIABLE INDUCTION SYSTEM>: B-36, B-39
AI
B-36
B-39

AC106604
Indicates that the terminal is a
spare one if the device (sensor
in this case) is not provided.
Indicates representative vehicle
body ground point. (Same
number as that of ground point in
GROUNDING LOCATION).
Indicates harness junction where
wire diameter or color changes.
In case two or more connectors
are connected to the same de-
vice, markings indicating the
same connector are connected
by a broken line.
Indicates terminal number.
A broken line indicates that these
connectors are the same interm-
ediate connectors.
Indicates intersections at
which the lead wires are
not connected.
Indicates intersections at
which the lead wires are
connected.
Indicates input/output
to/from control unit
(current flow direction).
InputOutputInput/
output
Indicates current flow downward
or upward as controlled by the
control unit.
AB
Indicates that the diagram comes
from which belongs to the
block in the same circuit.
Indicates a wiring connector which is inside
the equipment and which is not shown in
the wiring harness configuration diagram.
Example C-15-2
Indicates a connector
which is inside the
equipment, numbered
in order starting from 1.
Indicates the connector number shown in
the wiring harness configuration diagram.

STOPLIGHT
SWITCH
CLUTCH PEDAL POSITION
SWITCH <M/T>
VACUUM
ACTUATOR
AUTO-CRUISE
VACUUM PUMP
ASSEMBLY
THROTTLE
POSITION
SENSOR
PARK/NEUTRAL POSITION
SWITCH <A/T>
VEHICLES SPEED
SENSOR <M/T>
AUTO-CRUISE
CONTROL-ECUAUTO-CRUISE
CONTROL SWITCH
MAIN SWITCH
AUTO-CRUISE CONTROL
INDICATOR LIGHT

AC106579AB
Throttle Position Sensor System Circuit

AK100999
FUEL TANK DIFFERENTIAL
PRESSURE SENSOR
LIQUID SEPARATOR
EVAP
CANISTER EVAPORATIVE
EMISSION
PURGE
SOLENOID
ON: OPEN ECM <M/T>
PCM <A/T>
BAROMETRIC PRESSURE
SENSOR
INTAKE AIR TEMPERATURE
SENSOR
ENGINE COOLANT
TEMPERATURE SENSOR
VOLUME AIR FLOW SENSORFUEL
TA N K
MFI RELAYFUEL VENT
VA LV E
FUEL CUT
OFF VALVE
LEVELING VALVE
VENT VALVE
AIR FILTER EVAPORATIVE EMISSION
VENTILATION SOLENOID
ON: CLOSED
AB
CHAMBER

AK101000
FUEL TANK DIFFERENTIAL
PRESSURE SENSOR
LIQUID SEPARATOR
EVAP
CANISTER EVAPORATIVE
EMISSION
PURGE
SOLENOID
ON: OPEN ECM <M/T>
PCM <A/T>
BAROMETRIC PRESSURE
SENSOR
INTAKE AIR TEMPERATURE
SENSOR
ENGINE COOLANT
TEMPERATURE SENSOR
VOLUME AIR FLOW SENSORFUEL
TA N K
MFI RELAYFUEL VENT
VALVE
FUEL CUT
OFF VALVE
LEVELING VALVE
VENT VALVE
AIR FILTER EVAPORATIVE EMISSION
VENTILATION SOLENOID
ON: CLOSED
AB
AKX01304AB
EVAPORATIVE EMISSION PURGE
SOLENOID
<2.4L ENGINE>
AK102961AB
EVAPORATIVE EMISSION PURGE
SOLENOID
<3.0L ENGINE – WITH VIC>
AKX01306AC
EVAPORATIVE EMISSION PURGE
SOLENOID
<3.0L ENGINE – WITHOUT VIC>
AKX01305
EVAP VENTILATION SOLENOID
FUEL TANK
AB