drive belt MITSUBISHI LANCER 2006 User Guide

Removal steps
1.Pressure switch connector
2.A/C compressor harness connector
bracket <Vehicles with A/C>
3.Drive belt
4.Suction hose
5.Eye bolt
6.O-ring
7.Pressure hose
8.Oil pump assembly
9.Oil pump brace
POWER STEERING OIL PUMP ASSEMBLY
POWER STEERING37-36
<2000>
AC200116AB
22 ± 4 N·m
12 ± 2 N·m
22 ± 4 N·m
49 ± 9 N·m 57 ± 7 N·m
1
5
4
3
6
2
7
49 ± 9 N·m
Removal steps
1.Pressure switch connector
2.Drive belt
3.Suction hose
4.Pressure hose
<<A>>5.Oil pump assembly
6.A/C compressor harness
7.Power steering pump bracket
REMOVA L SER VICE POINT
<<A>> OIL PUMP ASSEMBL Y REMOV A L
<2000>
With the eng ine lif t ed by the jack, remove the o il
pump
assembly mounting b o lt (lower side) a t the pul
-
ley side .
INSPECTIONM13720053 0018 7
•Check the drive belt for cracks.
•Check th e pulley for une ven r o t a tion.
Remova l st ep s ( C ont inu e d)

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
CIRCUIT DIAGRAMS90-325
NOTE: CONNECTOR COUPLED: ON
CONNECTOR UNCOUPLED: OFF
: SEDAN
: WAGON
SEAT BELT
PRE-TENSIONER
DRIVE CIRCUITSEAT BELT
PRE-TENSIONER
DRIVE CIRCUIT MICRO COMPUTER
CONNECTOR
LOCK SWITCHCONNECTOR
LOCK SWITCH
SEAT BELT
PRE-TENSIONER (RH)
CONNECTOR
LOCK SWITCHCONNECTOR
LOCK SWITCH
SEAT BELT
PRE-TENSIONER (LH)CONNECTOR
LOCK SWITCH
SRS-ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White
Y : Yellow SB : Sky blue BR : Brown O : Orange
GR : Grey R : Red P : Pink V : Violet PU : Purple

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
CIRCUIT DIAGRAMS90-331
NOTE: CONNECTOR COUPLED: ON
CONNECTOR UNCOUPLED: OFF
: SEDAN
: WAGON
SEAT BELT
PRE-TENSIONER
DRIVE CIRCUITSEAT BELT
PRE-TENSIONER
DRIVE CIRCUIT MICRO COMPUTER
CONNECTOR
LOCK SWITCHCONNECTOR
LOCK SWITCH
SEAT BELT
PRE-TENSIONER (LH)
CONNECTOR
LOCK SWITCHCONNECTOR
LOCK SWITCH
SEAT BELT
PRE-TENSIONER (RH)CONNECTOR
LOCK SWITCH
SRS-ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White
Y : Yellow SB : Sky blue BR : Brown O : Orange
GR : Grey R : Red P : Pink V : Violet PU : Purple