key MITSUBISHI LANCER 2010 8.G MMCS Manual

Other Info 9-13
Information
Other Info
System information and information about the
current location can be viewed.
Support Info
System information for this navigation
system can be viewed.
1 Press the [INFO] key, and touch
[Support Info]
eng_a140

eng_a159
The support info screen is displayed.
SW Version The software version of the system
is displayed.
MAP Version
The map data version is displayed.
CDDB VersionThe database version of the title
information is displayed.
About version updates To update the map data version, insert the DVD
containing the new map data. A screen for selecting
whether or not data should be automatically updated
will appear.
 Insert the version update key, and follow the
procedures on the screen.
 For the operating procedure, please refer to the
instruction manual included with the MAP Update
DVD (sold separately). (Contact an authorized
Mitsubishi Motors dealer for assistance.)
Vehicle Position
The name of the current location, latitude
and longitude, and the number of GPS
satellites being received can be viewed.
1 Press the [INFO] key, and touch
[Vehicle Position]
eng_a140

eng_a160
The vehicle screen is displayed.NOTE Touch [North-Up] to switch to displaying north at the
top of the map.
 Touch [Heading-Up] to switch to displaying the
vehicle direction at the top of the map.
 Touch [ ], [ ], [ ] and [ ] to view the sky maps
by rotating or changing the angle.






  


Adjusting the Screen 10-1
Settings
Setting
Adjusting the Screen
Adjustments related to the screen display.
Display Off
Turns OFF the monitor display.
1 Press the [SET] key, and touch
[Display Off]
eng_a018-2

eng_a161
The monitor display is turned OFF.NOTE At this time, although the navigation voice guidance
will be switched off, the AV audio will remain on. To turn ON the display again, either touch the
screen, or press any key.
Picture Control
Adjustments related to the picture quality.
1 Press the [SET] key, and touch
[Picture Control]
eng_a018-2
2
Touch [ - ] or [ + ] for “Brightness”,
“Contrast”, or “Black Level” to adjust
eng_a162
NOTE “Brightness” can be adjusted with headlights ON and
OFF separately. If adjusting the
picture quality
while a DVD image
is displayed,
“Tint” and “Color
Intensity” can also
be adjusted.
eng_a231
3 Touch [Back]
The picture quality adjustment is completed.
Screen Size
Switches between Screen Size and other
displays for DVD image etc..
1 Press the [SET] key, and touch
[Screen Size]
eng_a163-2
2
Touch one of the following buttons
eng_a232
[Normal] Displays the screen in normal 4:3 aspect
ratio.
[Full] Extends the display evenly both left and
right in wide mode.
[Wide]Extends the left and right parts only of
the display while leaving the center as is
in wide mode.
[Zoom] Magni es the image displayed using 4:3
aspect ratio. (I.e., the top and bottom
are out of frame.) 3 Touch [Back]
Screen Size switching is completed.






 


Sound Control 10-2
Sound Control
Adjusts the sound.If Premium Sound System is not connected 1 Press the [SET] key, and touch
[Sound Control]
eng_a018-2
2
Touch each item to adjust the sound
eng_a164
NOTE Touch [Speed Compensated Volume &EQ off] to turn
ON sound quality and volume adjustments according
to vehicle speed. 3 Touch [Back]
The sound adjustment is completed.
If Premium Sound System is connected 1 Press the [SET] key, and touch
[Sound Control]
eng_a018-2

eng_a233
The sound control menu screen is displayed.
Audio Control
1 Touch [Audio Control] in the
Sound Control menu screen
2 Touch each item to adjust the
sound
eng_a234
NOTE PUNCH LEVEL represents subwoofer gain.
 Touch [Speed Compensated Volume & EQ off] to
turn ON sound quality and volume adjustments
according to vehicle speed. 3 Touch [Back]
The sound adjustment is completed.






 



System Settings 10-4
System Settings
The basic settings required by the navigation
function can be performed here.
1 Press the [SET] key, and touch
[System]
eng_a018-2

eng_a034-1
The system settings screen is displayed. 2 Touch each item to change the
setting
3 Touch [Back]
eng_a034-1
The setting change is completed.
Time
Changing the time zone.
1 Touch [Time]
2 Touch the desired zone
eng_a165
3 Touch [On] or [Off] for “Daylight
Saving Time”
4 Touch [Back]
eng_a166
The time zone settings are completed, and the display
returns to the system options screen.
Language
Changing the language used by the
system.
1 Touch [Language]
2 Touch one of the languages
eng_a205
3 Touch [Back]
[English] Change to English.
[Français] Change to French.
[Español] Change to Spanish.NOTE When the meter is set to Auto, the language of both
sides can be changed by performing operations on
either the MMCS side or the meter side.
 When the meter is set to Manual, the language
of the meter side and the MMCS side can be set
separately.






 


System Settings 10-6 Keyboard LayoutChanging the layout of the keyboard.
[Alphabet]
eng_a169
[PC]
eng_a170
Color SchemeSet the color scheme for the menu screen, etc.
[Red] The menu is displayed using a red color
scheme.
[Blue]The menu is displayed using a blue
color scheme.A/V Icons on MapIt is possible to set whether or not to display on screen
icons displaying the audio status.
[On] Display.
[Off] Do not display.
Sensor CalibrationThe level of the vehicle speed sensor and gyro sensor
can be checked and the learning levels can be reset.
eng_a206
NOTE When tires are replaced, etc., delete the data by
touching [Clear].
The learning levels can be reset.A/C Cut inSetting whether or not to use an interrupt display
during air conditioning operations.
[On] Interrupt is displayed.
[Off] Interrupt is not displayed.






 



Equipment 10-7
Settings
Equipment
Set the vehicle equipment.
1 Press the [SET] key, touch
[Equipment]
eng_a018
The equipment screen is displayed. 2 Touch the name of the equipment
group
eng_a237
3 Touch the item name
eng_a239
4 Touch the condition
eng_a240
5 Touch [Back]
The equipment settings are completed.
Equipment Items that Can Be Set
Refer to the section titled “Features and
Controls” in the vehicle owner’s manual for
details on setting these items.
Keyless Entry System Turn Signal Lights Answerback
 Horn Answerback Sounds at Keyless Entry Lock
 Duration of Horn Answerback SoundsF.A.S.T.*-key (Keyless Operation System)*:Free-hand Advanced Security Transmitter
 Turn Signal Lights Answerback
 Horn Answerback Sounds at keyless Entry Lock
 Duration of Horn Answerback Sounds
 Door Entry and Engine Start Function
 Keyless Operation Answerback Beep Sounds
 Time for Remote Unlock Inactivated after LockingNOTE Either “Keyless Entry System” or “Keyless Operation
System” will be displayed, depending on the equipment.
Wipers Windshield Wipers Intermittent Operation
 Wipers Linked to Washer
 Rear Wiper Intermittent Interval
 Rear Wiper Continuous OperationExterior Lights/Interior Lights Headlight Auto-cutout Function
 Interior Light Auto-cutout Time
 Duration Dome Light Remains On after Door is
ClosedTheft Alarm Panic AlarmTurn Signal Operation in Key Position
 Lane-change Signals (Flash Three Times with 1
Touch)Power Door Locks Automatic Relocking after Unlocked by Remote
 Unlock Operation
 Automatic Unlock when Transmission Shifted to ParkOthers Auto Cut of ACC Power






 


Personal Settings 10-17
Settings
4 Touch [Set Area]
eng_a184
NOTE Scroll using the
joystick to change
the position from
the displayed
location to a
different location.
After the change
eng_a185
has been completed, press the [ENT] key.
 Touch [Adjust
Size] to widen or
shrink the range
of the avoid area.
Complete by
touching [Set Area]
after the change.
eng_a186
5 Touch the “Name” button
eng_a187
6 Input the name of the avoid area
eng_a188
>>> “How to Enter Text” (page 2-13) 7 Touch [Set]
8 Touch [Set]
eng_a189

The storing of the avoid area is completed.
EditingEditing an avoid area that has already been stored. 1 Touch [Edit]
2 Touch the avoid area to edit
eng_a191
NOTE Touch [Active] to activate the setting for the avoid
area.
 Touch [Inactive] to deactivate the setting for the
avoid area. 3 Touch one of the items to edit
eng_a192
NOTE Touch [Adjust] to change the position or change the
range in the same way as step 4 of
“Registering”
(page 10-16)
.
 Touch the “Name” button to change the name of the
avoid area in the same way as step 5 of
“Registering”
(page 10-17)
.