navigation MITSUBISHI LANCER EVOLUTION 2010 10.G MMCS Manual

Air Conditioner 9-11
Information
Air Conditioner
The air conditioner status can be viewed.
1 Press the [INFO] key, and touch
[Air Conditioner]
eng_a140

eng_a203
1) Blower speed indicator
Displayed in 9 levels.
2) Air direction/Outside air intake indicator
3) Auto mode indicator
Displayed when the AUTO mode is operating.
4) Rear window defogger indicatior
Displayed when the rear window defogger is
operating.
5) Air conditioner indicator
Displayed when the air conditioner is operating.
6) Front defroster indicator
Displayed when the windshield defogger is
operating.NOTE When air conditioning operations are performed in the navigation screen display, the display shown below
will appear.
eng_a204
 A short time after air conditioner operations have
been completed, the screen will return to the
navigation display.
1)
2)3) 4) 5) 6)






 


Other Info 9-13
Information
Other Info
System information and information about the
current location can be viewed.
Support Info
System information for this navigation
system can be viewed.
1 Press the [INFO] key, and touch
[Support Info]
eng_a140

eng_a159
The support info screen is displayed.
SW Version The software version of the system
is displayed.
MAP Version
The map data version is displayed.
CDDB VersionThe database version of the title
information is displayed.
About version updates To update the map data version, insert the DVD
containing the new map data. A screen for selecting
whether or not data should be automatically updated
will appear.
 Insert the version update key, and follow the
procedures on the screen.
 For the operating procedure, please refer to the
instruction manual included with the MAP Update
DVD (sold separately). (Contact an authorized
Mitsubishi Motors dealer for assistance.)
Vehicle Position
The name of the current location, latitude
and longitude, and the number of GPS
satellites being received can be viewed.
1 Press the [INFO] key, and touch
[Vehicle Position]
eng_a140

eng_a160
The vehicle screen is displayed.NOTE Touch [North-Up] to switch to displaying north at the
top of the map.
 Touch [Heading-Up] to switch to displaying the
vehicle direction at the top of the map.
 Touch [ ], [ ], [ ] and [ ] to view the sky maps
by rotating or changing the angle.






  


Adjusting the Screen 10-1
Settings
Setting
Adjusting the Screen
Adjustments related to the screen display.
Display Off
Turns OFF the monitor display.
1 Press the [SET] key, and touch
[Display Off]
eng_a018-2

eng_a161
The monitor display is turned OFF.NOTE At this time, although the navigation voice guidance
will be switched off, the AV audio will remain on. To turn ON the display again, either touch the
screen, or press any key.
Picture Control
Adjustments related to the picture quality.
1 Press the [SET] key, and touch
[Picture Control]
eng_a018-2
2
Touch [ - ] or [ + ] for “Brightness”,
“Contrast”, or “Black Level” to adjust
eng_a162
NOTE “Brightness” can be adjusted with headlights ON and
OFF separately. If adjusting the
picture quality
while a DVD image
is displayed,
“Tint” and “Color
Intensity” can also
be adjusted.
eng_a231
3 Touch [Back]
The picture quality adjustment is completed.
Screen Size
Switches between Screen Size and other
displays for DVD image etc..
1 Press the [SET] key, and touch
[Screen Size]
eng_a163-2
2
Touch one of the following buttons
eng_a232
[Normal] Displays the screen in normal 4:3 aspect
ratio.
[Full] Extends the display evenly both left and
right in wide mode.
[Wide]Extends the left and right parts only of
the display while leaving the center as is
in wide mode.
[Zoom] Magni es the image displayed using 4:3
aspect ratio. (I.e., the top and bottom
are out of frame.) 3 Touch [Back]
Screen Size switching is completed.






 


System Settings 10-4
System Settings
The basic settings required by the navigation
function can be performed here.
1 Press the [SET] key, and touch
[System]
eng_a018-2

eng_a034-1
The system settings screen is displayed. 2 Touch each item to change the
setting
3 Touch [Back]
eng_a034-1
The setting change is completed.
Time
Changing the time zone.
1 Touch [Time]
2 Touch the desired zone
eng_a165
3 Touch [On] or [Off] for “Daylight
Saving Time”
4 Touch [Back]
eng_a166
The time zone settings are completed, and the display
returns to the system options screen.
Language
Changing the language used by the
system.
1 Touch [Language]
2 Touch one of the languages
eng_a205
3 Touch [Back]
[English] Change to English.
[Français] Change to French.
[Español] Change to Spanish.NOTE When the meter is set to Auto, the language of both
sides can be changed by performing operations on
either the MMCS side or the meter side.
 When the meter is set to Manual, the language
of the meter side and the MMCS side can be set
separately.






 


Navi Screen Options 10-9
Settings
Navi Screen Options
Settings related to the display.
1 Display the Navi Menu, and touch
[Navigation Settings]
eng_a004-2
2 Touch [Screen]
eng_a016-1

eng_a017-1
The screen options screen is displayed.
3 Touch each item to change the
setting
4 Touch [Back]
eng_a017-1
The setting change is completed.NOTE Touch [Default] to return to the factory settings.
One/Two Maps
Changing between the one map screen
and two maps screen.[One Map]
eng_a007
[Two Maps]
eng_a010






 


Route Options 10-12
Route Options
Setting the route search conditions.
1 Display the Navi Menu, and touch
[Navigation Settings]
eng_a502-2
2 Touch [Route]
eng_a016-1

eng_a125
The route options screen is displayed.
3 Touch each item to change the
setting
4 Touch [Back]
eng_a176
The setting change is completed.NOTE Touch [Default] to return to the factory settings.
Route Priority
Setting the route search priority.[Fast]
Searches for a short route in terms of
time (arriving quickly at the destination),
using freeways and major roads.
[Short] Searches for the route on the map with
the shortest distance.
[Easy] Search for a route that is easy to drive,
with few left or right turns (in particular
left turns).
Minimize Freeways
Setting the conditions for using freeways.[Yes] Calculates a route that uses freeways as
little as possible.
[No] Calculates a route that uses freeways.
Minimize Toll Roads
Setting the conditions for using toll roads.[Yes] Calculates a route that uses toll roads
as little as possible.
[No] Calculates a route that uses toll roads.






 


Guidance 10-14
Guidance
Setting the route guidance, and the display for
the route search results.
1 Display the Navi Menu, and touch
[Navigation Settings]
eng_a502-2
2 Touch [Guidance]
eng_a016-1

eng_a177-2
The guidance screen is displayed.
3 Touch each item to change the
setting
4 Touch [Back]
eng_a178-2
The setting change is completed.NOTE Touch [Default] to return to the factory settings.
Guidance Mode
Setting the guidance mode.
1 Touch [Change]
The guidance mode setting screen is displayed. 2 Touch one of the modes
eng_a180
Refer to
“Intersection Guidance” (page 2-10)
for details
on each mode.
3 Touch [Back]
eng_a181






 


Personal Settings 10-16
Personal Settings
Individual user settings such as the address
book, home location, and avoid areas can be
stored and edited.
1 Display the Navi Menu, and touch
[Navigation Setting]
eng_a502-2
2 Touch [Personal]
eng_a016-1

eng_a190-1
The personal settings screen is displayed. 3 Touch each item to change the
setting
Address Book
If frequently visited locations are stored in
advance in the address book, the route to
the stored location can be calculated. The
locations can be stored or edited in the
address book. A maximum of 99 items
can be stored.[New] A new location can be stored. Touch
[New], and then use the same
operations as
“Storing a New Location”
(page 5-1)
[Edit]Editing information about a stored
location.
>>> “Editing a Location” (page
5-4)
[Delete] Deleting a stored location.
>>> “Deleting” (page 5-5)
Home Location
Storing the home location and editing the
information.[New]Storing the home location. When a
home location has already been stored,
a new one cannot be stored until the old
location is deleted with [Delete].
>>> “When Storing Your Home” (page
5-2)
[Edit] Editing the home information. The
operations are the same as from step 3
of
“Editing” (page 5-4)
[Delete]Deleting the home location. The
operations are the same as from step 4
of
“Deleting” (page 5-5)
Avoid Areas
Areas to be avoided in a route search can
be stored and edited. A maximum of 5
items can be stored.
RegisteringStoring a new avoid area. 1 Touch [New]
2
Touch one of the [Empty] displays
eng_a182
3
Touch [Near Current Area] or [Jump
to Other Area]
eng_a183
NOTE When touching [Jump to Other Area], refer to “Destination” (page 3-1)
to search for the location of
the avoid area.






 


Personal Settings 10-19
Settings
Delete Previous 20
Destinations from the previous 20 set
destinations can be selected and deleted.
1 Touch [Select]
The delete previous 20 screen is displayed. 2 Touch the location to delete
eng_a197
NOTE The locations targeted for deletion are displayed with
a highlight.Touch a location again to remove it from
the deletion target.
 Multiple locations can be selected at the same time.
 Touch [Select All] to delete all locations at the same
time.
 Touch [Info] to
display a map of
the vicinity and
corresponding
information.
eng_a198
3 Touch [Done]
eng_a199
4 Touch [Yes]
eng_a200
The deletion of the selected locations is completed.
Navi Voice / Others
1 Display the Navi Menu, and touch
[Navigation Setting]
eng_a502-2
2 Touch [Navii Voice / Others]
eng_a016-1
>>>“Other Settings” (Page 10-5)






 


END-USER LICENSE AGREEMENT 10-20END-USER LICENSE AGREEMENT
END-USER TERMS
The Map data Disc (“Data”) is provided for your personal, internal use
only and not for resale. It is protected by copyright, and is subject to the
following terms and conditions which are agreed to by you, on the one
hand, and NAVTEQ North America, LLC (“NT”) and its licensors (including
their licensors and suppliers) on the other hand.
The Data for areas of Canada includes information taken with permission from
Canadian authorities, including: © Her Majesty the Queen in Right of Canada, ©
Queen’s Printer for Ontario,© Canada Post Corporation, GeoBase
®.
TERMS AND CONDITIONS
Personal Use Only. You agree to use this Data for the solely personal,
non-commercial purposes for which you were licensed, and not for service
bureau, time-sharing or other similar purposes. Accordingly, but subject
to the restrictions set forth in the following paragraphs, you may copy this
Data only as necessary for your personal use to (i) view it, and (ii) save
it, provided that you do not remove any copyright notices that appear and
do not modify the Data in any way. You agree not to otherwise reproduce,
copy, modify, decompile, disassemble or reverse engineer any portion of
this Data, and may not transfer or distribute it in any form, for any purpose,
except to the extent permitted by mandatory laws. You may transfer the
Data and all accompanying materials on a permanent basis if you retain
no copies and the recipient agrees to these End-User Terms. Multi-disc
sets may not be transferred on a divided basis.
Restrictions. Except where you have been specifically licensed to do
so by NT and without limiting the preceding paragraph, you may not (a)
use this Data with any products, systems, or applications installed or
otherwise connected to or in communication with vehicles capable of
vehicle navigation, positioning, dispatch, real time route guidance, fl eet
management or similar applications; or (b) with or in communication with
any positioning devices or any mobile or wireless-connected electronic
or computer devices, including without limitation cellular phones, palmtop
and handheld computers, pagers, and personal digital assistants or PDAs.
Warning. The map data may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources used and
the nature of collecting comprehensive geographic data, any of which may
lead to incorrect results.
No Warranty. This Data is provided to you “as is,” and you agree to use
it at your own risk. NT and its licensors (and their licensors and suppliers)
make no guarantees, representations or warranties of any kind, express
or implied, arising by law or otherwise, including but not limited to, content,
quality, accuracy, completeness, effectiveness, reliability, fitness for a
particular purpose, usefulness, use or results to be obtained from this
Data, or that the Data or server will be uninterrupted or error-free.Disclaimer of Warranty: NT AND ITS LICENSORS (INCLUDING
THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES,
EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT. Some States, Territories and Countries do not
allow certain warranty exclusions, so to that extent the above exclusion
may not apply to you.
Disclaimer of Liability: NT AND ITS LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU IN
RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE
OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR
ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR
INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION
OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE,
CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION,
ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE
TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT
OR TORT OR BASED ON A WARRANTY, EVEN IF NT OR ITS
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Some States, Territories and Countries do not allow certain
liability exclusions or damages limitations, so to that extent the above may
not apply to you.
Export Control. You agree not to export from anywhere any part of the
Data provided to you or any direct product thereof except in compliance
with, and with all licenses and approvals required under, applicable export
laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire
agreement between NT (and its licensors, including their licensors and
suppliers) and you pertaining to the subject matter hereof, and supersedes
in their entirety any and all written or oral agreements previously existing
between us with respect to such subject matter.
Governing Law. The above terms and conditions shall be governed by the
laws of the Illinois, without giving effect to (i) its confl ict of laws provisions,
or (ii) the United Nations Convention for Contracts for the International
Sale of Goods, which is explicitly excluded. You agree to submit to the
jurisdiction of Illinois for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
Government End Users. If the Data is being acquired by or on behalf of
the United States government or any other entity seeking or applying rights
similar to those customarily claimed by the United States government,
(i) for acquisitions conducted by the Department of Defense, the Data
is licensed with “Limited Rights” in accordance with the rights set forth
at DFARS 252.227-7013(b)(3), TECHNICAL DATA-NONCOMMERCIAL
ITEMS, and Data delivered or otherwise furnished with “Limited Rights”
shall be marked with the following “Limited Rights Notice” set forth at
DFARS 252.227-7013(f)(3), and shall be treated in accordance with such
Notice:
LIMITED RIGHTS
CONTRACTOR (MANUFACTURER/SUPPLIER) NAME:
NAVTEQ North America, LLC
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS:
222 Merchandise Mart Plaza, Suite 900, Chicago, Illinois 60654.
The Government's rights to use, modify, reproduce, release, perform, display, or disclose
these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data-
Noncommercial Items clause contained in the above identifi ed contract. Any reproduction
of technical data or portions thereof marked with this legend must also reproduce the
markings. Any person, other than the Government, who has been provided access to
such data, must promptly notify the above named Contractor.
and; (ii) for civilian agency acquisitions, the Data is licensed in accordance
with the rights set forth at FAR 52.227-14(g)(1), RIGHTS IN DATA-
GENERAL (Protection of limited rights data and computer software).
In the event that the Contracting Offi cer requires the delivery of limited
rights Data that has been withheld or would otherwise be withholdable
in accordance with FAR 52.227-14(g)(1), the Data is licensed with
“Limited Rights” as set forth in the following “Limited Rights Notice” at
FAR 52.227-14(g)(2) (Alternate II), which shall be affi xed to the Data and
the Data shall be treated in accordance with such Notice (which shall be
marked on any reproduction of these data, in whole or in part):
LIMITED RIGHTS NOTICE (JUNE 1987)
These data may be reproduced and used by the Government with the express limitation
that they will not, without written permission of the Contractor, be used for purposes of
manufacture nor disclosed outside the Government; except that the Government may
disclose these data outside the Government for the following purposes, if any, provided
that the Government makes such disclosure subject to prohibition against further use
and disclosure:
There are no additional purposes permitting disclosure of such Data.
The manufacturer/supplier of the Data is NAVTEQ North America, LLC, 222 Merchandise
Mart Plaza, Suite 900, Chicago, Illinois 60654.If the Contracting Offi cer refuses to use either of the licenses provided in (i)
or (ii), herein, the Contracting Offi cer must notify NAVTEQ North America,
LLC prior to seeking additional or alternative rights in the Data.