key MITSUBISHI LANCER EVOLUTION 2012 10.G MMCS Manual

System Settings 11-6 Keyboard Layout
Changing the layout of the keyboard.
[Alphabet]
eng_a169[PC]
eng_a170
Color SchemeSet the color scheme for the menu screen, etc.[Red] The menu is displayed using a red color scheme.
[Blue] The menu is displayed using a blue
color scheme.
A/V Icons on MapIt is possible to set whether or not to display on screen
icons displaying the audio status.
[On] Display.
[Off] Do not display.
Sensor CalibrationThe level of the vehicle speed sensor and gyro sensor
can be checked and the learning levels can be reset.
eng_a206
NOTE touching [Clear].
The learning levels can be reset.
A/C Cut inSetting whether or not to use an interrupt display
during air conditioning operations.
[On] Interrupt is displayed.
[Off] Interrupt is not displayed.
\b \b
\f \



 \b \b
\f

Equipment 11-7
Settings
Equipment
(if so equipped)
Set the vehicle equipment.

1 Press the [SET] key, touch
[Equipment]
eng_a018The equipment screen is displayed.
2 Touch the name of the equipment
group
eng_a237
3 Touch the item name
eng_a239
4 Touch the condition
eng_a240
5 Touch [Back]The equipment settings are completed.
Equipment Items that Can Be Set
Refer to the section titled “Features and
Controls” in the vehicle owner’s manual for
details on setting these items.
Keyless Entry System



F.A.S.T.*-key (Keyless Operation System)*:Free-hand Advanced Security Transmitter





NOTEEither “Keyless Entry System” or “Keyless Operation
System” will be displayed, depending on the equipment.
Wipers



Exterior Lights/Interior Lights


Closed
Theft Alarm
Turn Signal
Touch)
Power Door Locks


Others
\b \b
\f \



 \b \b
\f

Personal Settings 11-17
Settings
4 Touch [Set Area]
eng_a184
NOTE
joystick to change
the position from
the displayed
location to a
different location.
After the change
eng_a185 has been completed, press the [ENT] key.
[Adjust Size] to widen or
shrink the range
of the avoid area.
Complete by
touching [Set Area]
after the change.
eng_a186
5 Touch the “Name” button
eng_a187
6 Input the name of the avoid area
eng_a188>>> “How to Enter Text” (page 2-13)
7 Touch [Set]

8 Touch [Set]
eng_a189
The storing of the avoid area is completed.
EditingEditing an avoid area that has already been stored.
1 Touch [Edit]

2 Touch the avoid area to edit
eng_a191
NOTE area.
avoid area.
3 Touch one of the items to edit
eng_a192
NOTErange in the same way as step 4 of “Registering”
(page 11-17).
avoid area in the same way as step 5 of
“Registering”
(page 11-17).
\b \b
\f \




 \b \b
\f