ground clearance MITSUBISHI LANCER EVOLUTION VIII 2004 Workshop Manual

Page 25 of 166

REFERENCE MA
TERIAL – MAIN SPECIFICATIONS / DETAILED SPECIFICATIONS84
GHCT9AItem
SNDFZSJDFZSJGFZ
Minimum ground clearance m0.140¨¨
Max. speed (estimated) km/h180¨¨
Fuel consumption km/l (10/15 mode)9.69.7¨
Braking distance m (initial speed in
km/h) È49 (100)
[Vehicle with15" brakes]
43 (100)
[Vehicle with17" brakes]¨¨
Performance
Min. turning radius m5.9¨¨
Bore x stroke mm85.0 X 88.0¨¨
Compression ratio8.8 (Unleaded
Premium)¨¨
Max. output net [k/W r.p.m.]206 / 6500
(net)¨¨
Max. torque N•m/rpm.392 / 3500
(net)400 / 3500
(net) Ȩ
OpenBTDC 21˚BTDC 17˚
ȨIntake
ClosedABDC 59˚ABCD 63˚
Ȩ
OpenBBDC 58˚¨¨
Engine
Valve or
port timing
Exhaust
ClosedATDC 18˚¨¨
Fuel tank capacity (litres)50¨55
Type and performance of ignition
equipmentElectronic:
20˚~ 45˚¨¨
Type of spark plugsIGR7A,
IGR7AG,S22PRA7,VW22PRDA7¨¨
Battery capacity Ah34 (5), 48 (5)
or 52 (5)¨¨
Electrical
Equipment
Alternator output VA12 – 58, 90,
100 or 105¨¨
Detailed Specifications
These Detailed Specifications are based on submitted data, and may therefore differ from the actual equipment.
The
symbol indicates specifications which have changed from the previous model.

Page 34 of 166

02GENERAL MAIN SPECIFICATIONS
ITEMGHCT9A
SNDFZSJDFZSJGFZ
ClassOrdinary
UsePassenger
vehicle
Body
shapeSaloon
4490
1770
1450
Vehicle length mm
Vehicle width mmVehicle height mm
Distance between axles mm
2625
Front1515*1,
1500*21515*1Distance between
wheels mm
Rear1515*1,
1500*21515*1
Minimum ground clearance mm140
Length1880
Width1425
Interior dimensions
mm
Height1185
Front825
Dimensions
Body overhang mm
Rear875
Toein mm0±2
Camber *31º 00´ ±30´ or 2º 00´ ±30´
Castor3º 55´ ±30´
Front
wheels
King pin angle13º 45´
Toein mm3 ±2Rear
wheels
Camber1º 00´ ±30´
Driving
devices
Tyre size205/65R15 94H
235/45ZR17235/45ZR17
MAIN SPECIFICATIONS
Notes
1. *1 in the case of vehicles fitted with 17 inch tyres *2 in the case of vehicles fitted with 15 inch tyres
2.*3 it is possible to select from 3 types of camber. This is be set to 1˚ 00´ ±30´ when shipped from the factory.