weight MITSUBISHI LANCER EVOLUTION VIII 2004 Workshop Manual

ENGINE (4G6) – BASE ENGINE (6 M/T)14
4. Oil Rings
The outer circumference of the side rail has been treated with chrome nitride. The thickness of the side rail has also been
reduced from 1.7 mm to 1.63 mm, with a view to increasing durability and reducing oil consumption.
(Evolution VII MR) (Evolution VIII)
Chrome nitride
5. Counterbalance shaft
The shape of the shaft was changed in order to reduce weight.
Counterbalance shaft (right)
Counterbalance shaft (left)Thickness
reduced
Thickness
reduced

21Power Train – Differential
SECTION 2
POWER TRAIN
CONTENTS
Differential ..............................................21
Differential
The following changes have been made to the Super AYC differential.
• Reduced weight: The weight of the differential has been reduced by building the clutch case from aluminium, rather than
steel, and partially revising the thickness of the clutch discs.
• Improved strength and durability: Strength and durability have been raised by adopting special highstrength steel for the
hypoid gears (pinion gear and drive gear), instead of the cast steel used previously.
• Improved control when ABS is operating: Revisions to the communications with the ABSECU and the control procedure
during ABS operation, as well as active ACD/AYC control in high friction road surfaces, such as circuits, have led to
increased steerability and stability.
Structural Diagram
Hypoid gears
Clutch case
Clutch discs

31DRIVE CONTROL – Front suspension, Rear suspension, Wheels, Tyres
SECTION 3
DRIVE CONTROL
CONTENTS
Front suspension....................................31
Rear suspension .....................................31Wheels and Tyres ...................................31
Front suspension
Roadholding has been improved by the adoption of Bilstein shock absorbers.
(GRS: Standard; RS: Optional)
Notes :
* Bilstein are one of the world’s leading manufacturers of shock absorbers, and their products are used in racing vehicles
worldwide.
Rear suspension
• Roadholding has been improved by the adoption of Bilstein shock absorbers.
(GRS: Standard; RS: Optional)
•The specifications of the coil springs have been changed. (GSR)
Specifications
ItemLancer Evolution VIII MR GSRLancer Evolution VIII GSR
Wire diameter mm12
Average diameter mm88
Free length mm277287
Wheels and Tyres
BBS lightweight forged alloy wheels are provided as an option,
which reduces the unsprung weight. Fitting these BBS lightweight
wheels allows the Bilstein shock absorbers to display their fullrange of performance.
Note:
See “Section 8 Main Equipment” for detailed specifications.

41BODY – MAIN BODY
SECTION 4
BODY
CONTENTS
Main Body................................................41
Body Panels .....................................................41
Paintwork.................................................41
Body colour chart ............................................41
Main Body
Body Panels
Vehicle weight has been reduced by using aluminium for the roof panels and the side door beams, in addition to the bonnet
panel and front wing panels, as previously.
: Parts made from aluminium
Paintwork
Body colour chart
Colour name
(Former name)Colour
symbolColour
codeColour (paint)
numberCoating ingredientMaintenance
symbolName of paint
manufacturer
Cool Silver Metallic CLA31CMA10031AluminiumMKansai Paint
Medium Purplish Grey MicaESA39CMA10039Aluminium +
interference mica2PNippon Paint
Solid White (Scotia White)2EW83AC10983––SKansai Paint
Solid Red (Palma Red)JWP85AC11185––SKansai Paint
Note :
• The maintenance code is only for the top coat. S = Solid; M = Metallic; 2P = 2coat pearl
• The name of the paint manufacturer is the name of the manufacturer of the paint used at the time of production.

81REFERENCE MATERIAL – MAIN SPECIFICATIONS
SECTION 8
REFERENCE MATERIAL
CONTENTS
Main specifications.................................81
Detailed specifications ...........................84Main equipment ......................................86
Cold climate specifications ...................88
Main Specifications
These Main Specifications are based on submitted data, and may therefore differ from the actual equipment.
The
symbol indicates specifications which have changed from the previous model.
Vehicle name and modelMitsubishi GHCT9A
Chassis name and typeMitsubishi CT9A
ManufacturerMitsubishi Motor Corporation
CategoryNormal
UsePassenger
Body shapeSaloon
Engine type4G63
Capacity cc1997
GHCT9A
GHCT9AItem
SNDFZSJDFZSJGFZ
Classification No.È079, 080, 085, 086,
091, 092, 097, 098083, 084, 089,
090, 095, 096,
099~102105, 106, 109,
110, 113, 114,
117, 118119
Vehicle length mm4490
Vehicle width mm1770
Vehicle height mm1450
Wheelbase mm2625
Front15001515¨¨
Dimensions
Track mm
Rear15001515¨¨
WeightSee weight chart
Left50˚PerformanceMax.
angle ofstability
Right50˚
Wheel alignmentFront 2 drive – Rear 2 drive
Front
Other
Tyre
size
Rear
205/65R15 94H235/45ZR17¨¨
Note :
See Weight Chart for relationships between classification numbers and equipment.

REFERENCE MA
TERIAL – MAIN SPECIFICATIONS82
Weight Chart
GHCT9AItem
SNDFZ
Classification No. È079080
(A)083
(B,D,W)084
(A,B,D,W)085086 (A)
Front axle
weight800810¨830810820
Rear axle
weight510¨530¨510¨
Vehicle
weight kg È
Total131013201350136013201330
Number of passengers5
Front axle
weight900910¨930910920
Rear axle
weight685¨705¨685¨
Weight
Gross
vehicle
weight kg È
Total158515951625163515951605
GHCT9AItem
SNDFZ
Classification No. È089
(B,D,W)090
(A,B,D,W)091092
(A)095
(B,D,W)096
(A,B,D,W)
Front axle
weight830840800810¨830
Rear axle
weight530¨520¨540¨
Vehicle
weight kg È
Total136013701320133013601370
Number of passengers5
Front axle
weight930940900910¨930
Rear axle
weight705¨695¨715¨
Weight
Gross
vehicle
weight kg È
Total163516451595160516351645
GHCT9AItem
SNDFZ
Classification No. È097098 (A)099
(W)100
(A,W)101
(B,D,W)102
(A,B,D,W)
Front axle
weight810820¨830¨840
Rear axle
weight520¨530¨540¨
Vehicle
weight kg È
Total133013401350136013701380
Number of passengers5
Front axle
weight910920¨930¨940
Rear axle
weight695¨705¨715¨
Weight
Gross
vehicle
weight kg È
Total160516151625163516451655

REFERENCE MATERIAL – MAIN SPECIFICATIONS83
GHCT9AItem
SJDFZ
Classification No. È105
(B,D,W)106
(A,B,D,W)109
(B,D,W)110
(A,B,D,W)113
(B,D,W)
Front axle
weight830840¨850830
Rear axle
weight530¨¨¨540
Vehicle weight
kg
È
Total13601370¨13801370
Number of passengers5
Front axle
weight930940¨950930
Rear axle
weight705¨¨¨715
Weight
Gross vehicle
weight kg È
Total16351645¨16551645
GHCT9AItem
SJDFZSJGFZ
Classification No. È114
(A,B,D,W)117 (B,D,W)118
(A,B,D,W)119
(A,B,D,W)
Front axle
weight840¨850860
Rear axle
weight540¨¨¨
Vehicle weight
kg È
Total1380¨13901400
Number of passengers5
Front axle
weight940¨950960
Rear axle
weight715¨¨715
Weight
Gross vehicle
weight kg È
Total1655¨16651675
Notes :
The symbols after the Classification Numbers indicate the following equipment.
A: Air conditioning B: ABS D: ACD (Active Centre Differential) W: 17inch wheels