change wheel MITSUBISHI OUTLANDER 2011 2.G Owners Handbook

7
6) P\bwer Outlet (if equip\wped)
12 V POWER OUTLETS:
TYPE 1: l ocated in the floor console and the lugg\:age compartment. a ccessories can be operated when the ignition\: switch is in either
the ON or ACC position.
TYPE 2: l ocated in the floor console box. a ccessories can be operated in all ignition \:switch positions.
7) Sunr\b\bf (if equipped)
TO OPEN: Push the switch in the desired direction [1]
TO CLOSE: Push the switch in the desired direction [3]
TO TILT UP: Push the switch [2]
TO TILT DOWN: Push the switch to the direction [3]
8) Heated Seats (if equipped)
t he heated seat controls are located at the side of each f\:ront seat. t he heated seats can be operated by pushing the switch when the
ignition switch is in the ON position. t he indicator light will illum\:inate while the heater is on.
9) Drive M\bde Sele\ft\br (if equipped)
t he drive mode can be switched by turning the dial \:while the ignition \:switch is in the ON position. t he following drive modes are
available:
2WD: t his mode is for economical driving on\: normal dry roads and freeways.
4WD AUTO: t he default mode. t his mode is for all driving conditions on various roads.
4WD LOCK: t his mode is for driving in slippery\: conditions such as \:on snow\bcovered roads or sand.
10) Multi-Inf\brmati\bn Display (if equipped)
t he multi\binformation display shows fuel remaining, outside t\:emperature, selector lever position, all\bwheel drive operation
status, etc. it is also possible to change elements su\:ch as the language \:and units by using the multi\bi\:nformation meter (INFO)
button. t he display screen is different depending on whet\:her the ignition switch is in the OFF or ON position.
1
3
2