NISSAN ALTIMA 2007 L32A / 4.G Navigation Manual

NAV2822
INFO:
If the suggested route is already set, by
highlighting [Show Along Route] and push-
ing<ENTER>, the system displays only the
facilities located along the route.
NAV2823
5. The system sets the destination to the
selected location and starts calculating a
route.
INFO:
If the route is already set, the selected
location becomes a waypoint.
NAV2824
INFO:
You can also set the destination by pushing
<ENTER>in the current location map
screen and selecting [Nearby].
Setting a destination4-49

The following operations are available after you
set a destination.
INFO:
The menu will not be displayed if you select,
[Stored Route] or [Nearby Places] from the
Destination menu.
NAV2863
AVAILABLE SETTING ITEMS
.OK:
Sets the destination. If the route is already
set, the location becomes the new destina-
tion, and the route is recalculated.
.Alter Location:
Displays a map screen where you can adjust
the location of the destination.
.Add to Route:
Allows you to add a waypoint to the route
already set..POI Info:
Allows you to view information about the
facility that you have set as the destination if
it is included in the map DVD-ROM data.
.Store Location:
Allows you to store the location in the
Address Book.
OPERATIONS AFTER SETTING A
DESTINATION
4-50Setting a destination

ADJUSTING THE LOCATION OF THE
DESTINATION
You can adjust the location of the destination by
moving the cross pointer across the map.
NAV2864
1. Set the destination using an appropriate
method.
2. Highlight [Alter Location] and push
<ENTER>.
NAV2865
3. Adjust the location by moving the cross
pointer across the map and push
<ENTER>.
The location of the destination is modified.
Setting a destination4-51

ADDING ADDITIONAL DESTINATIONS
TO A ROUTE
Even after the route is already set, you can add a
searched location as a new destination or
waypoint to that route.
If the route has not been set, [Add to Route]
cannot be selected.
NAV2866
1. Set the destination using an appropriate
method.
2. Highlight [Add to Route] and push
<ENTER>.
NAV2867
3. Highlight [Destination] or [Waypoint] and
push<ENTER>.
4-52Setting a destination

VIEWING INFORMATION ABOUT THE
SEARCHED LOCATION
Information (street address and phone number)
about facilities stored in the map DVD-ROM
data can be displayed.
NAV2868
1. Set the destination using an appropriate
method.
2. Highlight [POI Info] and push<ENTER>.
NAV2869
3. Information about the location is displayed.
4. Push<ENTER>, or highlight [Back] and
push<ENTER>to return to the previous
screen.
Setting a destination4-53

STORING A LOCATION
A searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .
NAV2870
1. Set the destination using an appropriate
method.
2. Highlight [Store Location] and push
<ENTER>.
NAV2871
3. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
4-54Setting a destination

5 Route guidance
Procedures after setting a destination..................... 5-2
Available items after setting a destination............. 5-2
Starting route guidance................................... 5-3
Selecting a route........................................... 5-3
Confirming a route.......................................... 5-4
Adding a destination or waypoint....................... 5-5
About route guidance.......................................... 5-7
Voice guidance during route guidance................. 5-7
Guidance screens and preview mode................. 5-8
Route setting..................................................5-10
Basic operation...........................................5-10
Setting conditions for the route calculation.............5-12
Route priority settings...................................5-12
Detailed route priorities..................................5-13
Change/edit route............................................5-15
Basic operation...........................................5-15Setting a detour route...................................5-17
Recalculate route.........................................5-18
Editing a route.............................................5-19
Confirming a route............................................5-26
Basic operation...........................................5-26
Using turn list..............................................5-27
Using route preview......................................5-27
Confirming by simulation................................5-28
Route guidance settings....................................5-29
Basic operation...........................................5-29
Visual guidance settings................................5-31
Voice guidance settings.................................5-32
Set average speeds......................................5-33
Deleting/reactivating a route...............................5-35
Deleting a route...........................................5-35
Reactivating a route......................................5-36

After you set a destination using an appropriate
method and select [OK], the system starts
calculating a route to the destination.
Select the preferred setting item and push
<ENTER>.
INFO:
If you have not performed any operations on the
system for several seconds, [Start] is automati-
cally selected, and the system starts route
guidance.
NAV2872
AVAILABLE ITEMS AFTER SETTING A
DESTINATION
.Start:
Starts route guidance to the selected
destination.
“STARTING ROUTE GUIDANCE”
(page 5-3)
.More Routes:
Displays 3 alternative routes.
“SELECTING A ROUTE” (page 5-3).Route Info:
Displays the route information.
“CONFIRMING A ROUTE”
(page 5-4)
.Add Way Pt.:
Allows you to edit the route by adding a
destination or waypoint.
“ADDING A DESTINATION OR
WAYPOINT” (page 5-5)
PROCEDURES AFTER SETTING A
DESTINATION
5-2Route guidance

NAV2873
STARTING ROUTE GUIDANCE
1. Highlight [Start] and push<ENTER>.
Route guidance starts.
NAV2874
SELECTING A ROUTE
1. Highlight [More Routes] and push
<ENTER>.
2. Highlight the preferred route condition and
push<ENTER>.
3. Push<BACK>/<PREV>to return to the
previous screen.
NAV2875
Available route conditions
&1Short. Time (Blue):
Prioritizes by the shortest time.
&2Min. FWY (Red):
Minimizes the use of freeways.
&3Short. Dist. (Green):
Prioritizes by the shortest distance.
INFO:
.After you select a route, a preview is
displayed on the right side of the screen.
.The 3 routes may not always be different.
Route guidance5-3

NAV2876
CONFIRMING A ROUTE
1. Highlight [Route Info] and push<ENTER>.
2. Highlight the preferred information item and
push<ENTER>.
3. Push<BACK>/<PREV>to return to the
previous screen.
NAV2877
Available information
.Preview:
Allows you to confirm the route by scrolling
on the map manually.
“USING ROUTE PREVIEW”
(page 5-27)
.Simulation:
Allows you to view a simulation of the route.
“CONFIRMING BY SIMULATION”
(page 5-28)
5-4Route guidance