alarm NISSAN ALTIMA 2008 L32A / 4.G 06IT Navigation Manual

Black plate (128,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Sound
Sets the tone of the arrival alarm that sounds
when the vehicle approaches the home or a
stored location.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Sound] and push<ENTER>.
A sound list is displayed.
3. Highlight the preferred alarm tone by scrol-
ling the list using the main directional
buttons or the center dial. Then push<ENTER>. The indicator of the selected
alarm tone illuminates.
Sound list:
None
Chime
Melody
Sound
Dog
Cat
Wave
Church bell
Music box 1
Music box 2
Marimba
Trumpet
Horn
Scratch
Direction
Sets the alarm to sound when approaching from
a specific direction.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Direction] and push<ENTER>.
The home or stored location is displayed at
the center of the map.
3. Set the direction that sounds the alarm
using the center dial or the left or right
button of the main directional buttons. Then
push<ENTER>. The selected direction is
set.
6-14Storing a location/route

Black plate (129,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
.While setting the direction, you can change
the map scale.
.After the direction is set, if you highlight
[Direction] and push<ENTER>once again,
a confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push<ENTER>. The set direction
is cancelled.
Distance
Sets the alarm to sound when reaching a
specific distance to the home or stored location.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Distance] and push<ENTER>.
3. Highlight the preferred distance option and
push<ENTER>. The indicator of the
selected distance illuminates.
Available distance options:
.150 feet (50 m)
.300 feet (100 m)
.1000 feet (300 m)
.1500 feet (500 m)
INFO:
Once you set the direction and distance to
sound an alarm, the system will sound the alarm
when the vehicle icon passes a half circle outline
on the map, as shown in the figure.
Example: Set to 300 feet (100 m) distance,
upward direction
&1Stored location icon
&2Vehicle icon
&3Setting range
Phone No.
Stores the telephone number of the home or a
stored location.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Phone No.] and push<ENTER>.
The telephone number entry screen is
Storing a location/route6-15