light NISSAN ARMADA 2017 2.G 08IT Navigation Manual

2. Highlight the preferred map color and push<ENTER>. The indicator light of the se-
lected color illuminates.
Available map colors
.[Warm]:
Set warm colors for the map coloring.
. [Cool]:
Set cool colors for the map coloring.
. [Traffic Emphasis]:
Set light colors for the map coloring to
emphasize the traffic information.
INFO:
The effect of setting changes can be confirmed
on the preview displayed on the right side of the
screen.
CHANGING BirdviewTMANGLE
The BirdviewTMangle can be changed.
This setting is available only in the BirdviewTM
map or 2D/BirdviewTMsplit map.
1. Highlight [Birdview Angle] and push <ENTER>.
2. Adjust the BirdviewTMangle using the multi-
function controller.
3. Push <MAP>to return to the current
location map screen.
3-16Map settings

SETTING LEFT SCREEN DISPLAY
When the split screen is displayed, the map
settings of the left screen can be changed.
1. Highlight [Left Split Map Settings] and push<ENTER>.
2. Highlight the preferred map view and push
<ENTER>.
3. Push <MAP>to return to the current
location map screen.
Available setting items
. [Map Orientation]:
The map direction can be selected as
follows.
— [North Up]: North is set at the top of the map.
— [Heading Up]: The traveling direction is set at the top of
the map.
. [Long Range]:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
. [Map Scale]:
A scale appears on the left side of the
screen. This changes the scale of a map.
INFO:
. The settings of the right screen are the same
as the settings of the full screen map.
. Touching the icon on the map can also
change the direction and scale of the map. Icons of particular facilities can be displayed on
the map.
DISPLAYING MAP ICONS
Map icons can be displayed or hidden by type.
1. Push
<ENTER> while the current location
map screen is displayed.
2. Highlight [Map Icons] and push <ENTER>.
LOOKING AT INFORMATION ON
THE MAP
Map settings3-17

3. Highlight the preferred icon and push<ENTER>. The icon display setting toggles
between on and off each time <ENTER>is
pushed. The indicator of the selected icon
illuminates.
4. Push <MAP>to return to the current
location map screen. The activated icons
are displayed on the map.
INFO:
If registered in the map data, the brand icons will
be displayed on the map instead of the general
map icons listed below.
Map icons that can be displayed
.Restaurant
.
Gas Station
.
Hotel
.
AT M
.
Rest Area
Other settings
Landmark icons can also be set using the
following procedure.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.3. Highlight [Map Icons] and push
<ENTER>.
INFO:
The map icons are not displayed on the map
screen when the map scale is set to 1/4 mile
(500 m) or higher in the 2D map, or to 1 mile (2
km) or higher in Birdview
TMmap.
MAP SCROLLING INFORMATION
Information about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3-18Map settings

3. Highlight [Others] and push<ENTER>.
4. Highlight [Map Scrolling Information] and
push <ENTER>.
5. Highlight the preferred information item and
push <ENTER>. The indicator of the
selected information item illuminates.
Available information items:
.[Address Book Icons]
.[Destination/Waypoint Icons]
.[Latitude/Longitude Info]
6. Push <MAP>to return to the current
location map screen. Move the cross pointer
to the set location to display the information.
Map settings3-19

ROAD COLOR
The road types are differentiated by colors.
Freeway: Red or Light Red (zoomed in)
Main road: Brown or Dark Yellow
Narrow street: Gray
Road with incomplete map data: Dark green
TRAFFIC INFORMATION ON MAP
With a subscription to NavTraffic service, traffic
information is displayed.
“Viewing available traffic information”
(page 7-3)
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event: Purple
dashed arrow
Traffic information icons:
Accident
Closed road
Information
Road work
Slippery road
Weather
Incident
Map settings3-21

There are several methods available to set a
destination. Understand the advantages of each
method and select the best method for finding
and setting a preferred destination.
BASIC OPERATION
1. Push<DEST>.
2. Highlight the preferred destination setting method and push <ENTER>.
Available setting items
.[Street Address]:
Searches for a destination by address.
. [Places]:
Searches for a destination from various
categories of businesses or locations.
. [Home]:
Searches for a route from the current
location to the previously stored home
destination. .
[Address Book]:
Searches for a destination from the list of the
stored locations.
. [Previous Destinations]:
Searches for a destination from the previous
destinations.
. [Delete Destination]:
Deletes the currently set destination.
Available setting items (next page
screen)
.[Previous Start Point]:
Sets the previous starting point as the
destination.
. [Stored Routes]:
Selects a stored route.
. [Phone Number]:
Searches for a point of interest by a
telephone number.
INFO:
The system cannot be used to search for
residential phone numbers. . [Freeway Entrance/Exit]:
Searches for a destination from a freeway
entrance/exit. .
[Intersection]:
Searches for a destination from intersec-
tions.
. [City Center]:
Sets the center of a city as the destination.
CHANGING REGION
When setting a destination, the location can be
narrowed down by specifying the region or city.
Specifying the region
1. Push <DEST>.
2. Highlight [Change Region] and push <ENTER>.
DESTINATION SCREEN
4-2Setting destination

3. Highlight the preferred region and push<ENTER>.
Available setting items: . US1: CA, NV
. US2: AZ, CO, ID, MT, NM, OR, UT, WA, WY
. US3: IA, KS, MN, MO, ND, NE, SD
. US4: AR, LA, MS, OK, TX
. US5: IL, IN, MI, WI
. US6: DC, DE, KY, MD, OH, PA, VA, WV
. US7: CT, MA, ME, NH, NJ, NY, RI, VT
. US8: AL, FL, GA, NC, SC, TN
. US9: AK
. US10: HI
. Canada .
Puerto Rico
. Virgin Islands
INFO:
. It is also possible to select a region by
touching the map on the right side of the
screen.
. It is not possible to search for a route from
the continental United States to Hawaii,
Puerto Rico and Virgin Islands.
Specifying city
When searching for a destination with “Street
Adress”, “Places”, “Intersection”, “City Center”,
etc., the search can be narrowed down by
specifying the city.
1. Highlight [Select a City] and push
<ENTER>.
2. Enter the name of the city, highlight [List]and push <ENTER>.
A list screen is displayed.
INFO:
.The same screen will be displayed when a location is searched from a street
address or an intersection, and when
[City] is highlighted and <ENTER>is
pushed.
“Finding address” (page 4-4)“Setting intersection” (page 4-16)
.Highlight [Last 5 Cities] and push <ENTER> to display 5 cities recently
set as destinations.
Setting destination4-3

3. Highlight the city of the destination from thelist and push <ENTER>.
INFO:
In some cases, when a city name has been
entered, the number of matching destinations in
the “Matches” column may be different from the
number displayed on the list screen. If this
occurs, enter more characters to further reduce
the number of matches.
FINDING ADDRESS
When the address of the destination is available,
use this method to enter the address and then
have the system calculate a route. A location
near the preferred destination can also be
searched for by entering the house number if
the map data contains the relevant data.
1. Push <DEST>, highlight [Street Address]
and push <ENTER>. A character input
screen is displayed.
2. Enter the house number, highlight [OK] and
push <ENTER>. If the house number is not
available, highlight [No House #] and push
<ENTER>. A street name input screen is
displayed.
3. Enter the name of the street. After finishing the entry, highlight [List] and push
<ENTER>. A list of streets is displayed.
INFO:
When [City] is highlighted and <ENTER>
pushed, a city can be specified by typing the
city name.
“Specifying city” (page 4-3)
4. Highlight the correct street of the destina- tion from the list and push <ENTER>.
4-4Setting destination

INFO:
In some cases, when a street name has
been entered, the number of matching
destinations in the “Matches” column may
be different from the number displayed on
the list screen. If this occurs, enter more
characters to further reduce the number of
matches.
5. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination, and push
<ENTER>. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc.
“Procedures after setting destination” (page 5-2)
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To set the destination from a street address:
“Navigation” “Address” (Standard mode)
“Address” (Alternate command mode)
INFO:
When using a voice command to set a street
name, the complete street name is recom-
mended to be stated.
Examples:
Correct input – North Elm Street East Jefferson Boulevard
Incorrect input – Elm Street East Jefferson
FINDING PLACE
There are several methods for setting a place of
interest as the destination. These include typing
a name or choosing a category. To help improve
searching, different start points can be chosen
to search from such as Near Current Location,
Near the Destination, or a City Center.
Finding nearby place
1. Push<DEST>.
2. Highlight [Places] and push <ENTER>.
3. Highlight the preferred nearby category from
the list and push <ENTER>.
A list screen is displayed.
INFO:
Highlight [Customize Nearby Places] to
customize the nearby places list to show
categories that are frequently used.
Setting destination4-5

“Customizing Nearby Places”
(page 8-8)
4. Highlight the preferred destination from thelist, and push <ENTER>. The position of
the selected location is displayed in the
preview on the right side of the screen.
INFO:
.A maximum of 100 facilities can be displayed on the list screen.
.To search for facilities along your route,
select [Show Along Route].
5. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination, and push
<ENTER>. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
If there is a route already set, the newly selected
location can substitute a previously set destina-
tion or be added to a route already set. Other settings:
The destination can also be set by pushing
<ENTER>
in the current or scrolled location
map screen and selecting [Nearby Places].
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To display the nearby category list and select the
destination from it:
“Navigation” “Places” (Standard mode)
“Places” (Alternate command mode)
4-6Setting destination