high beam NISSAN CUBE 2013 3.G Quick Reference Guide

HeaDLIGHT CONTrOL SwITCH
HEADLIGHT
cONTR

OL
Turn the headlight control switch to the
position

01 to turn on the front parking, side marker, tail, license plate and instrument panel lights. Turn the switc
h to the
position
02 to turn on the headlights.
A UTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is\
dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off


and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auTO position
03
th
en push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the

OFF,
01 or
position
02 .
HIGH BEAM SELE
cT
Push the headlight control switch forward
04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05 to flash the headlight high beams on and off.

7
MaNuaL TraNSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (Neutral) position .
Depress the clutch pedal to the floor.
Turn the ignition switch to start the engine.
T
URNING THE ENGINE OFF
Apply the foot brake and place the vehicle in first gear,



then apply the parking brake and turn the ignition
switch to

OFF.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
03
01
02
04
05
1221378_13a_Cube_QRG_092112.indd 1110/2/12 9:26 AM

first drive features
8
wINDSHIeLD wIPe r aN D w aS Her SwIT CH
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) - One sweep operation of the



front
wipers.
02 Intermittent (INT) - Front wipers operate



intermittently. T
he intermittent operation



speed can be adjusted by twisting the time



control
ring
03 .
04 Low (LO) - Front wipers operate at a continuous



low
speed.
05 High (HI) - Front wipers operate at a continuous



high
speed.
06 Pull the lever toward you to activate the



front washer. T
he front wipers will operate



several
times.
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper



operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous



low
speed.
09 Push the lever forward to activate the rear washer.



The rear wiper will operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
04
05
MIST
OFF
INT
INT
LO
ON
HI
06
09
07
08
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
FOG LIGHT SWITcH (if so equipped)
NO TE: The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the
OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
03
1221378_13a_Cube_QRG_092112.indd 1610/2/12 9:26 AM