maintenance reset NISSAN CUBE 2014 3.G Quick Reference Guide
Page 5 of 20
3
esse ntial i n for mation
TIRE PRESSURE MONITORING SYSTEM (TPMS)
    A CHECK…  TIRE… PRES … warning message 01 will appear 
 
as scrolling text in the trip computer display 02  and the low tire 
 
pressure warning light  03 will illuminate when one or more tires 
 
are low in pressure and air is needed.
 
 
• 
 
T
he tire pressures should be checked when the tires are cold.   
The tires are considered cold after the vehicle has been parked   
for 3 hours or more or driven less than 1 mi (1.6 km) at   
moderate speeds.
    After tire pressures are adjusted, drive the vehicle at speeds   
above 16 MPH (25 km/h). The CHECK... TIRE... PRES...  
warning message and low tire pressure warning light  
will disappear.
    When the low tire pressure warning light  flashes 
 
for approximately 1 minute and then remains on, the   
TPMS is not functioning properly. Have the system   
checked by a NISSAN dealer.
     Tire pressure rises and falls depending on the heat   
caused by the vehicle’s operation and the outside temperature. Low   
outside temperature can lower the temperature of the air inside the tire\
,   
which can cause a lower tire inflation pressure. This may cause the low tire pressure warning 
light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
 
 
• Chec
 k the tire pressures (including the spare tire) often and always prior to long distance trips.
    The Tire and Loading Information label contains valuable information. Please refer to “Technical and consumer information” (section 9)”, in your Owner’s Manual for the location of the Tire 
and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the 
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
01
02
03
LOOSE FUEL CAP
    A LOOSE FUEL CAP warning message will appear   
in the trip computer display  
01 when the fuel-filler 
 
cap is not tightened correctly.
    To tighten, turn the cap clockwise until a single click   
is heard.
    The warning message will disappear when the vehicle   
detects the fuel-filler cap is properly tightened and the   
reset button  
02 is pressed.
    If the cap is not properly tightened, the Malfunction Indicator Light
  may also illuminate.
For more information, refer to the “Instruments and controls (section 2)” and the “Pre-driving checks and adjustments 
(section 3)” of your Owner’s Manual.
01
02
1523989_14_Cube_QRG_091613.indd   39/16/13   3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.