NISSAN FRONTIER 2006 D22 / 1.G Navigation Manual

Other settings are also available for the map
screen, such as changing the map direction,
splitting the screen, etc.SETTINGS OF HEADING/LONG
RANGE MAP VIEWYou can change the map direction (orientation)
in Plan View or change the position of the
vehicle icon to view a wider area in the traveling
direction.
These settings are available only in the Plan
View or Split (Plan View) mode.
NAV2711
1. Push<ENTER> while the current location
map screen is displayed.
NAV2759
2. Highlight [Heading] and push <ENTER>
.
OTHER SETTINGS FOR THE MAP
SCREEN
Map settings
3-15

NAV2760
3. Highlight the preferred map orientation andpush <ENTER> . The indicator of the
selected map orientation illuminates.
INFO:
[Long Range Map View] is displayed only
when you select [Heading Up].
4. Push <MAP>to return to the current
location map screen.
Available map orientations. North Up:
North is set at the top of the map.
. Heading Up:
The traveling direction is set at the top of the
map.
. Long Range Map View:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
. Birdview
TM
Angle:
This changes the Birdview
TM
angle.
NAV2761
North Up
NAV2762
Heading Up
3-16
Map settings

NAV2763
Long Range Map View
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.: North Up: Heading Up
NAV2764
INFO:
You can also set the orientation of the map using
the following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Heading] and push <ENTER>.
CHANGING THE BIRDVIEW
TM
ANGLE
This changes the Birdview
TM
angle.
This setting is available only in the Birdview
TM
or
Split (Birdview
TM) mode.
Map settings
3-17

NAV2711
1. Push<ENTER> while the current location
map screen is displayed.
NAV2759
2. Highlight [Heading] and push <ENTER>
.
NAV2765
3. Highlight [Birdview
TM
Angle] and push
<ENTER> .
INFO:
This setting is available only when the map
view is set to the Birdview
TM
or Split
(Birdview
TM) mode.
3-18
Map settings

NAV2766
4. Adjust the Birdview
TM
angle by moving the
cursor in the direction of [
]or[
]. 5. Push
<MAP>to return to the current
location map screen.
NAV2764
INFO:
You can also set the Birdview
TM
angle using the
following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Heading] and push <ENTER>
.
4) Highlight [Birdview
TM
Angle] and push
<ENTER> .Map settings
3-19

CHANGING THE SCALE OF THE LEFT
SCREENWhen the split screen is displayed, you can
change the scale of the left screen.
NAV2711
1. Push<ENTER> while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push <ENTER>
.
3-20
Map settings

NAV2767
3. Highlight [Change Map Scale for Left] andpush <ENTER> .
INFO:
[Change Map Scale for Left] is displayed
only when the map view is in the Split (Plan
View) or Split (Birdview
TM) mode.
NAV2768
4. Highlight [Map Scale] and push <ENTER>
.
Adjust the map scale by moving the cursor
in the direction of [+] or [ ].
Use the joystick to adjust the scale of the
map.
After finishing the setup, push <ENTER>
or
<BACK> /
<PREV> to apply the scale
setting.
5. Push <MAP>to return to the current
location map screen.
NAV2750
INFO:
You can also change the scale of the left screen
using the following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Map View] and push <ENTER>.
4) Highlight [Change Map Scale for Left] and push <ENTER> .
Map settings
3-21

Some landmarks in the surrounding area can be
displayed as icons on the screen.DISPLAYING LANDMARK ICONSThis allows you to display or hide the landmark
icons by type.Landmark icons that can be displayed.
Restaurant
.Gas Station
.Hotel
.AT M
.Rest Area
NAV2711
1. Push <ENTER> while the current location
map screen is displayed.
NAV2769
2. Highlight [Landmark Icons] and push
<ENTER> .
MAP ICONS3-22
Map settings

NAV2770
3. Highlight the preferred icon and push<ENTER> .
The icon display setting toggles on and off
each time you push <ENTER>.
The indicator of the selected icon illumi-
nates.
NAV2771
4. Push <MAP>to return to the current
location map screen.
The activated landmark icons are displayed
on the map.
NAV2772
INFO:
You can also set the landmark icons using the
following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Landmark Icons] and push <ENTER> .
Map settings
3-23

MAP SYMBOLSThis navigation system uses symbols to display facilities.
NAI0416
3-24
Map settings