navigation NISSAN GT-R 2016 R35 Multi Function Display Owner's Manual


> (GLW    0RGHO 51 @
2-12Navigation
3.Highlight [Change View] and push
<ENTER>.
4. Highlight the preferred map view and push <ENTER>. The indicator of the selected
map view illuminates.
5. The display automatically returns to the map screen.
Available views
. [2D Map]:
Switches to the 2D map.
. [Birdview (3D)]:
Switches to the Birdview
TMmap.
. [Split: 2D Map]:
Changes to the split screen mode and both
halves display maps in 2D.
. [Split: Birdview Map]:
Changes to the split screen mode and the
left half displays the map in 2D and the right
half displays the map in Birdview
TM.
INFO:
. When the split screen mode is selected, the
map settings for the left screen can be
changed independently.
ªSetting left screen displayº
(page 2-16)
. If the split screen mode is selected, the
normal map scrolling and scale adjustment
are set in the right screen. However, if an
icon is touched before adjusting the map
direction or scale, then each screen can be
adjusted independently.
Split: 2D Map
Split: BirdviewTMMap
Other settings
The map view can also be set by performing the
following procedure.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Map View] and push <ENTER>.
4. Highlight [Change View] and push
<ENTER>.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
5.Highlight the preferred item and push
<ENTER>.
Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
. To display the 2D map:
ªPlan View mapº (Alternate Command
Mode)
. To display the Birdview
TMmap:
ªBirdview mapº (Alternate Command Mode)
MAP VIEW SETTINGS
Other settings are also available for the map
screen, such as changing the map direction,
map color, Birdview
TMangle, etc.
Basic operation
1. Push <ENTER> while the current location
map screen is displayed.
2. Highlight [Map View] and push <ENTER>.
3.Highlight [Map Settings] and push
<ENTER>.
4.Highlight the preferred item and push
<ENTER>.
Available setting items
. [Map Orientation]:
Sets the map direction to North Up or
Heading Up.
ªSetting map orientationº (page 2-14)
Navigation2-13
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-14Navigation
.[Long Range]:
Sets the long range map view display on/off.
ªSettings long range map viewº
(page 2-15)
. [Map Color]:
Changes the map color.
ªSetting map color º (page 2-15)
. [Birdview Angle]:
Changes the Birdview
TMangle.
ªChanging BirdviewTMangleº
(page 2-16)
. [Left Split Map Settings]:
Sets the map settings for the left screen of
the split map.
ªSetting left screen displayº
(page 2-16)
. [Show all Freeway Exits on Route]/[Auto.
Show Turn List on Freeway]:
Sets the display of the freeway exit informa-
tion on/off.
ªShow exit information on freewaysº
(page 2-51)
Other settings:
The orientation of the map can also be set by
performing the following procedure.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Map View] and push <ENTER>.
Setting map orientation
The map direction (orientation) can also be
changed in the 2D map. These settings are
available only in the 2D map or 2D/2D split map.
1.Highlight [Map Orientation] and push
<ENTER>.
2. Highlight the preferred map orientation and
push <ENTER>. The indicator of the
selected map orientation illuminates.
3. Push <MAP> to return to the current
location map screen.
Available map orientations
. [North Up]:
The top of the map remains oriented to the
north.
. [Heading Up]:
The top of the map follows the traveling
direction.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.
: North Up
: Heading Up
North Up
Heading Up
INFO:
The direction of the map can also be changed by
touching the icon on the map screen.
Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
To charge the map direction:
ªNorth Upº (Alternate Command Mode)
ªHeading Upº (Alternate Command Mode)
Settings long range map view
The position of the vehicle icon can be changed
to view a wider area in the traveling direction. If
this function is activated, the vehicle icon is
located slightly lower than the center of the
screen.
1.Highlight [Long Range] and push
<ENTER>. The indicator illuminates.
2. Push <MAP> to return to the current
location map screen.
Long Range Map View
INFO:
[Long Range] is displayed only when [Heading
Up] is selected.
Setting map color
The map color can be changed to a warm or
cool color, or a light color, to emphasize the
traffic information.
Navigation2-15
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-16Navigation
1. Highlight [Map Color] and push<ENTER>.
2. Highlight the preferred map color and push
<ENTER>. The indicator light of the se-
lected color illuminates.
Available map colors
The following map colors are available.
. [Warm]:
Sets warm colors for the map coloring. .
[Cool]:
Sets cool colors for the map coloring.
. [Traffic Emphasis]:
Sets light colors for the map coloring to
emphasize the traffic information.
INFO:
The effect of the setting changes can be
confirmed on the preview displayed on the right
side of the screen.
Changing BirdviewTMangle
The BirdviewTMangle can be changed.
This setting is available only in the BirdviewTM
map or 2D/BirdviewTMsplit map.
1. Highlight [Birdview Angle] and push
<ENTER>.
2. Adjust the BirdviewTMangle by rotating the
center dial.
3. Push <MAP> to return to the current
location map screen.
Setting left screen display
When the split screen is displayed, the map
settings of the left screen can be changed.
1. Highlight [Left Split Map Settings] and push
<ENTER>.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2.Highlight the preferred map setting and
push <ENTER>.
3. Push <MAP> to return to the current
location map screen.
Available setting items
. [Map Orientation]:
The map direction can be selected as
follows.
Ð [North Up]:
The top of the map remains oriented to
the north.
Ð [Heading Up]: The top of the map follows the traveling
direction.
. [Long Range]:
Positions the vehicle icon slightly lower than
the center of the screen. This offers a wider
view in the traveling direction. .
[Map Scale]:
Displays a scale on the left side of the
screen. Use this to change the scale of a
map.
INFO:
. The settings of the right screen are the same
as the settings of the full screen map.
. The icon on the map can also be changed
by touching the direction and scale of the
map.
LOOKING AT INFORMATION ON
MAP
Icons can be displayed on the map, and
information about destinations and landmarks
can be displayed.
Displaying map icons
The map icons can be displayed or hidden by
type.
1. Push <ENTER> while the current location
map screen is displayed.
2. Highlight [Map Icons] and push <ENTER>.
Navigation2-17
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-18Navigation
3.Highlight the preferred icon and push
<ENTER>. The icon display setting toggles
between on and off each time <ENTER>is
pushed. The indicator of the selected icon
illuminates.
4. Push <MAP> to return to the current
location map screen. The activated icons
are displayed on the map.
INFO:
If they are registered in the map data, the brand
icons will be displayed on the map instead of the
general map icons listed below.
Map icons that can be displayed
The following map items can be displayed.
.
Restaurant
.
Gas Station
.
Hotel
.
ATM
.
Rest Area
Other settings:
The map icons can also be set by performing the
following procedure.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Map Icons] and push <ENTER>.
INFO:
The map icons are not displayed on the map
screen when the map scale is set to 1/4 mile
(500 m) or higher in the 2D map, or to 1 mile (2
km) or higher in the Birdview
TMmap.
Map scrolling information
Information about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
3. Highlight [Others] and push<ENTER>.
4. Highlight [Map Scrolling Information] and
push <ENTER>.
5. Highlight the preferred information item and
push <ENTER>. The indicator of the
selected information item illuminates.
The following information items are available.
.[Address Book Icons]
.[Destination/Waypoint Icons]
.[Latitude/Longitude Info]
6. Push <MAP> to return to the current
location map screen. Move the cross pointer
to the set location to display the information.
MAP MENU SCREEN
Push <ENTER> while the current location map
screen or a scrolled map screen is displayed to
display the menu corresponding to that screen.
This menu can be used to access helpful
functions quickly, such as setting a destination
and searching for points of interest nearby.
There are various methods used to select a
menu item. Use a method described earlier in
this manual.
ªMenu screens and their purposesº
(page 1-10)
INFO:
With the touch panel operation, the same
screen can be displayed by touching [Map
Menu] located on the map screen.
Current location map screen
If <ENTER> is pushed while the current
Navigation2-19
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-20Navigation
location map screen is displayed, the following
options are available.
.[Store Location]:
Stores the current vehicle location in the
Address Book. The stored location can be
retrieved as necessary to set it as a
destination (waypoint) .
ªStoring locationº (page 2-70)
. [Nearby Places]:
Searches for points of interest near the
current vehicle location, such as restaurants
and gas stations, etc.
ªFinding nearby placeº (page 2-27)
. [Map View]:
Performs map operations such as the
switching of map type and the setting of
map orientation and scale.
ªMap settingsº (page 2-5)
. [Map Icons]:
Displays map icons of certain points of
interest (such as restaurants and gas sta-
tions, etc.) on the map around the current
vehicle location.
ªDisplaying map iconsº (page 2-17)
. [Store Tracking]:
Stores in the Address Book the route
travelled from the starting point to the
current location.
ªStoring tracked routeº (page 2-74)
Scrolled location map screen
If<ENTER> is pushed while a scrolled map
screen is displayed, the following options are
available.
. [New Dest.]:
Sets the destination to the map location
where <ENTER> was pushed. If a destina-
tion is already set, the location will be set as
the new destination.
ªSetting point on mapº (page 2-42)
. [Add to Route]:
Sets the map location where <ENTER>
was pushed as the destination or a way-
point. This is available only when a sug-
gested route is already set.
ªSetting destination or waypointº
(page 2-56) .
[Nearby Places]:
Searches for points of interest near the map
location where <ENTER>was pushed and
sets them as a destination or waypoint.
Use the same search method as the one for
[Places].
ªFinding nearby placeº (page 2-27)
. [Store Location]:
Store the map location where <ENTER>
was pushed in the Address Book. The
stored location can be retrieved to set it as
a destination or waypoint.
ªStoring locationº (page 2-70)
. [Delete]:
Deletes a stored location. To delete, place
the cross pointer over the corresponding
icon.
. [Incident Detail]:
This function can be selected only when the
traffic information icon is displayed. Displays
the details of the traffic information icon.
Place the cross pointer over the icon to be
checked.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
INFO:
Incident details are a feature of Traffic Informa-
tion, and that a NavTraffic subscription is
required in order to receive Traffic Information.
Navigation2-21
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK