steering NISSAN GT-R 2016 R35 Multi Function Display Service Manual


> (GLW    0RGHO 51 @
How to view screen
&1CORNERING G (timeline graph of lateral g-
force):
Displays the lateral g-force exerted on the
vehicle. The horizontal readout displays lateral
g-force while the vertical readout displays a
timeline of the past 20 seconds of driving. G-
force exerted on the vehicle when turning left is
displayed on the right side of the screen. G-force
exerted on the vehicle when turning right is
displayed on the left side of the screen. The g-
force timeline will begin to scroll down auto-
matically after a short period of time.
&2Red zone display:
The color of the graph will change when the level
of g-force exerted on the vehicle while decelerat-
ing exceeds a preset level.
&3G-meter:
Displays the g-force currently being exerted on
the vehicle due to deceleration.
&4SPEED:
Displays the current driving speed.
&5STEERING:
Displays the angle of the steering wheel.
INFO:
. The extent to which the steering of the
vehicle is displayed on the meter may vary
depending on the vehicle speed.
. Due to the slope of a road, this meter may
register g-force even when the vehicle is
stopped. This is not a malfunction
. When the VDC or the ABS is activated, a
mark will appear on the far left side of the
panel (large panel only) .
. The scale of the readout is adjusted auto-
matically to accommodate readings that
exceed the upper limit of the meter.
Using result screens to improve
driving
This section explains how to use the driving
timeline screens. Use this information to make
your driving smoother.
INFO:
The criteria for smooth driving may vary depend-
ing on road conditions. Use this information for
reference purposes only.
Timeline and driving that show smooth
handling when driving through S-curve:
&1Turn the steering wheel slowly and the angle of
the graph slopes gently.
&2Turning the wheel slowly through the turn will
result in a smooth, curving line.
Multi function meter10-21
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
10-22Multi function meter
&3By turning the steering wheel slowly back to its
previous position, the line on the graph timeline
returns to its standard position and the vehicle
stabilizes.
Timeline and driving that show sudden
turning of steering wheel:
&1Because the wheel is turned quickly, the buildup
of the line is very sudden.
&2When the wheel is turned back quickly, the
resulting line appears as a point.
&3When the steering wheel is being turned in an
erratic manner, the vehicle is veering abruptly.
Because of this, the line on the panel fluctuates
without settling.
This allows you to measure/display the timeline
and waypoint history over a given time.
STOPWATCH SCREEN
With the STOP WATCH screen you can
measure a segment of time or passing time.
You can also display and save recorded time-
lines and data.
How to view screen
&1TIME LOG:
Prominently displays the current time being
measured. The measured times are displayed in
a list. The system can store up to 99 items in its
memory.
&2Timer-on indicator:
The timer-on indicator will flash when the stop-
watch function is active.
&3SPEED:
Displays the vehicle speed while driving.
&4ELAPSED TIME:
Displays the total elapsed time measured since
the stopwatch function was started.
Measuring timed distance
To measure the timed distance, use<START/
STOP> or<MRK> on the steering switch.
1. With the STOP WATCH screen displayed,
push <START/STOP>. The timer-on in-
dicator will flash when the stopwatch func-
tion is active.
DRIVING RECORD SCREEN
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
12-12Troubleshooting guide
SymptomPossible cause Possible solution
The system does not accept
the voice command.
or
The system accepts the voice
command incorrectly. The interior of the vehicle is too noisy.
Close the windows or have other occupants be quiet.
The volume of the voice is too low. Speak louder.
The volume of the voice is too loud. Speak softer.
Pronunciation is unclear. Speak clearly.
The voice command is given before the voice recognition
system is ready. Push
<
>on the steering wheel, and speak a command after the tone
sounds.
8 seconds or more have passed after pushing <
>on the
steering wheel. Make sure to speak a command within 8 seconds after the beep tone
sounds.
Only a limited range of voice commands is usable for each
screen. Use a correct voice command appropriate for the current screen.
INFO:
For the best recognition, speak appropriate commands. Command lists are available earlier in this manual.
Standard Mode:
ªCommand Listº (page 8-6)
Alternate Command Mode:
ªCommand Listº (page 8-19)
VOICE RECOGNITION
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
Setting previous start point ..................................... 2-35
Setting the image viewer .......................................... 7-11
Settings screen ............................................................. 7-2
Speaker adaptation .................................................... 8-22
Speed limit indication on map ................................ 2-92
Standard mode ............................................................. 8-2
Start-up screen ............................................................. 1-9
Status screen ................................................................ 6-2
Steering screen ........................................................ 10-20
Steering switch ............................................................. 1-8
Stopwatch screen ................................................... 10-22
Storing a location/route ............................................ 2-70
Storing avoid area ...................................................... 2-75
Storing location ........................................................... 2-70
Storing route ................................................................ 2-73
Storing tracked route ................................................ 2-74
System feedback announcement modes ............. 8-22
T
Tire pressure information............................................ 6-4
To turn the system OFF .............................................. 5-6
Touch panel operation ............................................... 1-13
Trademarks ..................................................................... 0-5
Traffic information ....................................................... 12-9
Traffic information on map ........................................ 6-10
Traffic information settings ....................................... 6-11
Transferring information to/from address book .... 2-89
U
Unit settings ................................................................... 7-9
Unit settings (Tire Pressure) ................................... 7-10
USB (Universal Serial Bus) connection port ....... 3-17
Using Voice Recognition System .................. 8-4, 8-17
V
Vehicle icon .................................................................. 12-4
Vehicle information screen ......................................... 6-4
Ventilators ....................................................................... 5-6
Viewing available traffic information ......................... 6-7
Viewing available weather information .................. 6-12
Viewing GPS current location information ........... 6-22
Viewing information about current
vehicle location ............................................................. 6-3
Viewing navigation system version information .... 6-22
Voice command examples ............................... 8-9, 8-24
Voice commands .......................................................... 4-3
Voice guidance .................................................. 2-4, 12-8
Voice recognition ..................................................... 12-12
Volume adjustment ....................................................... 7-6
W
What is GPS (Global Positioning System)? ....... 11-2
When gray road is displayed on map ................... 11-6
X
XM NavTraffic