open hood NISSAN JUKE 2015 F15 / 1.G Owners Manual


> (GLW   0RGHO )'@
3 Pre-driving checksandadjustments
K eys ...
.............................................................................................. 3-2
Intelligent Keys ...
..................................................................... 3-2
Doors ...
............................................................................................ 3-4
Locking withkey ...
.................................................................. 3-4
Locking withinside lockknob ...
.......................................... 3-4
Locking withpower doorlockswitch ...
............................ 3-5
Automatic doorlocks ...
......................................................... 3-5
Child safety reardoor lock ...
............................................... 3-6
Intelligent Key system ...
.............................................................. 3-6
Intelligent Key operating range...
........................................ 3-8
Door locks/unlocks precaution...
........................................ 3-8
Intelligent Key operation ...
.................................................... 3-9
Battery saversystem ...
....................................................... 3-10
W arning lightsandaudible reminders ...
........................ 3-10
T roubleshooting guide...
..................................................... 3-11
How touse remote keyless entryfunction ...
................ 3-12Hood
...
......................................................................................... 3-15
Lift gate ...
.................................................................................... 3-16
Front sideandrear unique parts(NISMO models) ...
..... 3-17
Fuel-filler door...
........................................................................ 3-18
Opening thefuel-filler door...
......................................... 3-18
Fuel-filler cap...
.................................................................. 3-18
Tilt steering column ...
.............................................................. 3-20
Tilt operation ...
................................................................... 3-20
Sun visors ...
................................................................................ 3-21
Mirrors ...
..................................................................................... 3-21
Inside mirror ...
..................................................................... 3-21
Outside mirrors ...
............................................................... 3-22
V anity mirror ...
..................................................................... 3-23
&RQGLWLRQ


> (GLW   0RGHO )'@
Switching procedure:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
T o switch thehazard indicator andhorn (chime)
operation, pushtheLOCK
*
1
and UN-
L OCK
*
2
buttons onthe Intelligent Key
simultaneously formore than2seconds.
. When thehazard indicator modeisset, the
hazard indicator flashes3times.
. When thehazard indicator andhorn mode is
set, thehazard indicator flashesonceand
the horn chirps
once.
NOS1695
GUID-DDF6 7E0E-97E9-4 54E-A431-36 E50A96E436
WARNING
. Make surethehood iscompletely
closed andlatched beforedriving.
Failure todo socould cause the
hood tofly open andresult inan
accident.
. Ifyou seesteam orsmoke coming
from theengine compartment, to
avoid injury donot open thehood.
Pre-d riving checks andadjustments
3-15
HOOD
&RQGLWLRQ


> (GLW   0RGHO )'@
3-16
Pre-driving checksandadjustment s
JVP0338X
When opening thehood:
1. Pull thehood release handle
*
1
located
below theinstrument panel;thehood will
then spring upslightly .
2. Locate thelever
*
2
in between thehood
and grille, andpullthelever upwith your
fingertips.
3. Raise thehood
*
3
.
4. Remove thesupport rod
*
4
and insert it
into theslot
*
5
.
Hold thecoated part
*
A
when removing or
resetting thesupport rod.Avoid direct
contact withthemetal parts,asthey may
be hot immediately aftertheengine hasbeen
stopped.
When closing thehood:
1. While supporting thehood, return the
support rodtoits original position.
2. Slowly lowerthehood toabout 8to 12 in
(20 to30 cm) above thehood lock,thenlet
it drop.
3. Make sureitis securely latched.
GUID-9CA2 02EA-33F9- 40ED-9CE7-7 9784558EBE6
WARNING
. Always besure theliftgate has
been closed securely toprevent it
from opening whiledriving.
. Do not drive withtheliftgate open.
This could allowdangerous exhaust
gases tobe drawn intothevehicle.
See ªExhaust gas(carbon monox-
ide)º (P.5-2) ofthis manual.
. Do not leave children unattended
inside thevehicle. Theycould un-
knowingly activateswitches orcon-
trols. Unattended childrencould
become involved inserious acci-
dents.
. Make surethatallpassengers have
their hands, etc.inside thevehicle
before closing theliftgate.
LIFT GATE
&RQGLWLRQ


> (GLW   0RGHO )'@
6-10
In case ofemergency
CAUTION
Do not keep thestarter motorengaged
for more than10seconds. Ifthe engine
does notstart right away, placethe
ignition switchinthe OFF position and
wait 10seconds beforetryingagain.
9. After starting yourengine, carefully discon-
nect thenegative cableandthen thepositive
cable (
*
4
?
*
3
?
*
2
?
*
1
) .
10. Replace thevent caps (ifso equipped) .Be
sure todispose ofthe cloth usedtocover
the vent holes asitmay becontaminated
with corrosive acid.
GUID-A764 C60A-F34B- 45BD-8A21-8 3DCBF259F31
Do not attempt tostart theengine bypushing.
CAUTION
. Continuously Variable Transmission
(CVT) models cannotbepush-
started ortow-started. Attempting
to do somay cause transmission
damage.
. Three-way catalystequipped mod-
els should notbestarted bypushing
since thethree waycatalyst maybe
damaged.
. Never trytostart thevehicle by
towing it; when theengine starts,
the forward surgecouldcause the
vehicle tocollide withthetow
vehicle.
GUID-70 6E277F-8F7 5-437A-8E9B -3AA46086CF31
CAUTION
. Do not continue todrive ifyour
vehicle overheats. Doingsocould
cause engine damage oravehicle
fire.
. To avoid thedanger ofbeing
scalded, neverremove theradiator
cap while theengine isstill hot.
When theradiator capisremoved,
pressurized hotwater willspurt out,
possibly causingseriousinjury.
. Do not open thehood ifsteam is
coming out.
If your vehicle isoverheating (indicatedbyan
extremely hightemperature gaugereading) ,or if
you feel alack ofengine power, detectabnormal
noise, etc.,takethefollowing steps:
1. Move thevehicle safelyoffthe road and
apply theparking brake.
2. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe N(Neutral)
position.
PUSH STARTING IFYOUR VEHICLE OVERHEA TS
&RQGLWLRQ


> (GLW   0RGHO )'@
Do not stop theengine.
3. Turn offthe airconditioner (ifso equipped) .
Open allthe windows, movetheheater orair
conditioner temperature controltomaximum
hot and fancontrol tohigh speed.
4. Get outofthe vehicle. Lookandlisten for
steam orcoolant escaping fromtheradiator
before opening thehood. (Ifsteam or
coolant isescaping, turnoffthe engine.)
Do not open thehood further untilnosteam
or coolant canbeseen.
5. Open theengine hood.
WARNING
If steam orwater iscoming fromthe
engine, standcleartoprevent getting
burned.
6. Visually checkthedrive beltfordamage or
looseness. Alsocheck ifthe cooling fanis
running. Theradiator hosesandradiator
should notleak water. Ifcoolant isleaking or
the cooling fandoes notrun, stop the
engine.
WARNING
Be careful nottoallow yourhands, hair,
jewelry orclothing tocome intocontact
with, orget caught in,engine beltsor
the engine cooling fan.Theengine
cooling fancan start atany time.
7. After theengine coolsdown, checkthe
coolant levelinthe reservoir withtheengine
running. Addcoolant tothe reservoir if
necessary .Have yourvehicle repaired ata
NISSAN dealer.
In case ofemergency
6-11
&RQGLWLRQ


> (GLW   0RGHO )'@
7-2
Appeara nceand care
GUID-A 755C59E-96 E5-4928-B560-61064A7BF708
In order tomaintain theappearance ofyour
vehicle, itis important totake proper careofit.
T o protect thepaint surfaces, washyourvehicle
as soon asyou can:
. after arainfall toprevent possible damage
from acidrain
. after driving oncoastal roads
. when contaminants suchassoot, bird
droppings, treesap, metal particles orbugs
get onthe paint surface
. when dustormud builds uponthe surface
Whenever possible,storeorpark yourvehicle
inside agarage orinacovered area.
When itis necessary topark outside, parkina
shady areaorprotect thevehicle withabody
cover.
Be careful nottoscratch thepaint surface
when putting onorremoving thebody
cover.
W ASHING
GUID-C55 956CD-3D46 -45AD-807C-40DA5D82 0D73
W ash dirtoffthe vehicle withawet sponge and
plenty ofwater. Cleanthevehicle thoroughly
using amild soap, aspecial vehiclesoapor
general purpose dishwashing liquidmixed with
clean, lukewarm (neverhot)water.
CAUTION
. Donot use carwashes thatuseacid
in the detergent. Somecarwashes,
especially brushlessones,usesome
acid forcleaning. Theacid mayreact
with some plastic vehicle compo-
nents, causing themtocrack. This
could affect theirappearance, and
also could cause themnottofunc-
tion properly. Alwayscheckwith
your carwash toconfirm thatacid
is not used.
. Donot wash thevehicle withstrong
household soap,strong chemical
detergents, gasolineorsolvents.
. Do not wash thevehicle indirect
sunlight orwhile thevehicle bodyis
hot, asthe surface maybecome
water-spotted.
. Avoid usingtight-napped orrough
cloths, suchaswashing mitts.Care
must betaken whenremoving
caked-on dirtorother foreign sub-
stances sothe paint surface isnot
scratched ordamaged.
Rinse thevehicle thoroughly withplenty ofclean water.
Inside flanges, seamsandfolds onthe doors,
hatches andhood areparticularly vulnerableto
the effects ofroad salt.Therefore, theseareas
must beregularly cleaned.Makesurethatthe
drain holes inthe lower edgeofthe door are
open. Spray waterunder thebody andinthe
wheel wellstoloosen thedirt and wash away
road salt.
Avoid leaving waterspotsonthe paint surface
by using adamp chamois todry the vehicle.
CLEANING EXTERIOR
&RQGLWLRQ


> (GLW   0RGHO )'@
8-2
Maintenan ceand do-it-you rself
GUID-F9 6B6657-8490 -48CF-8E36-2FC0C96EB EFB
Some day-to-day andregular maintenance is
essential tomaintain yourvehicle goodmechan-
ical condition, aswell asitsemission andengine
performance.
It is the owner's responsibility tomake surethat
the scheduled maintenance, aswell asgeneral
maintenance, isperformed.
As the vehicle owner,youarethe only onewho
can ensure thatyour vehicle receives theproper
maintenance care.You are avital linkinthe
maintenance chain.
SCHEDULED MAINTENANCE
GUID-3B 7A96FC-E80 F-4057-8D4E -C9FA6EC67DE 7
For your convenience, bothrequired andop-
tional scheduled maintenance itemsarede-
scribed andlisted inyour ªNISSAN Serviceand
Maintenance Guideº.You must refertothat
guide toensure thatnecessary maintenance is
performed onyour vehicle atregular intervals.
GENERAL MAINTENAN CE
GUID-49 3839A7-B51 E-43D6-8709-886EBB7EF3EF
General maintenance includesthoseitems
which should bechecked duringnormal day-
to-day operation. Theyareessential forproper
vehicle operation. Itis your responsibility to
perform theseprocedures regularlyaspre-
scribed.
Performing generalmaintenance checksre-
quires minimal mechanical skilland only afew
general automotive tools. These
checks orinspections canbedone by
yourself, aqualified technician or,ifyou prefer, a
NISSAN dealer.
WHERE TO GO FOR SERVICE
GUID-9AC69 D8A-FA6E-4549-95 A3-251C43F083A7
If maintenance serviceisrequired oryour vehicle
appears tomalfunction, havethesystems
checked andserviced byaNISSAN dealer.
NISSAN technicians arewell-trained specialists
and arekept up-to-date withthelatest service
information throughtechnical bulletins,service
tips, andin-dealership informationsystems.
They arecompletely qualifiedtowork on
NISSAN vehiclesbeforeworkbegins.
Y ou can beconfident thataNISSAN dealer's
service department performsthebest jobto
meet themaintenance requirements onyour
vehicle.
GUID-B5 6933A5-9FB0 -4EF0-9C66-D5A1231C0 588
During thenormal day-to-day operationofthe
vehicle, generalmaintenance shouldbeper-
formed regularly asprescribed inthis section. If
you detect anyunusual sounds, vibrations or
smell, besure tocheck forthe cause orhave a
NISSAN dealerdoitpromptly .In addition, you
should notifyaNISSAN dealerifyou think that
repairs arerequired.
When performing anychecks ormaintenance
work, seeªMaintenance precautionsº(P.8-5) .
EXPLANA TIONOFMAINTEN ANCE
ITEMS
GUID-87019D A8-A907-41B0-8B95- 6248ACACE5 9B
Additional information onthe following
items withª*ºisfound laterinthis section.
Outside thevehicle
GUID-FAF E9F42-4CDC-4F7F-AD 9D-4E5B63D18CFE
The maintenance itemslistedhereshould be
performed fromtimetotime, unless otherwise
specified.
Doors andengine hood:Check thatalldoors
and theengine hoodoperate properly.Also
ensure thatalllatches locksecurely .Lubricate
hinges, latches, latchpins,rollers andlinks if
necessary .Make surethatthesecondary latch
keeps thehood fromopening whentheprimary
latch isreleased.
When driving inareas usingroadsaltorother
corrosive materials, checklubrication frequently.
MAINTENAN CEREQUIREME NT GENERALMAINTENANCE
&RQGLWLRQ


> (GLW   0RGHO )'@
8-18
Maintenance anddo-it-yours elf
GUID-5D3 853F1-457C-4 3BF-BB0B-081E44A4FA78
CLEANING
GUID-49071C BE-D68E-45DF-B0FB-4E 24EC69E48E
If your windshield isnot clear afterusing the
windshield washerorifa wiper blade chatters
when running, waxorother material maybeon
the blade orwindshield.
Clean theoutside ofthe windshield witha
washer solution oramild detergent. Your
windshield isclean ifbeads donot form when
rinsing withclear water.
Clean eachblade bywiping itwith acloth
soaked inawasher solution oramild detergent.
Then rinsetheblade withclear water. Ifyour
windshield isstill notclear aftercleaning the
blades andusing thewiper, replace theblades.
CAUTION
Worn windshield wiperblades can
damage thewindshield andimpair
driver
vision.
SDI1803
REPLACING
GUID-3AFC6 7FF-FD24-43FF-A0BD-093F6A3B2 436
Replace thewiper blades ifthey areworn.
Before replacing thewiper blades, thewiper
should beinthe fully upposition toavoid
scratching theengine hoodordamaging the
wiper arm.To pull upthe wiper arm,see
ªWindshield wiperandwasher switchº (P.2-32) .
1. Liftthe wiper armaway fromthewindshield.
2. Push andhold therelease tab
*
A
, and
move thewiper blade downthewiper arm
*
1
.
3. Insert thenew wiper blade ontothewiper
arm until aclick sounds. 4.
Rotate thewiper blade sothat thedimple is
in the groove.
CAUTION
. After wiper blade replacement, re-
turn thewiper armtoits original
position; otherwise itmay beda-
maged whenthehood isopened.
. Make surethewiper blades contact
the glass; otherwise thearm may be
damaged fromwind pressure.
WINDSHIELD WIPERBLADES
&RQGLWLRQ


> (GLW   0RGHO )'@
8-20
Maintenance anddo-it-yours elf
light tomoderate stopsisnormal anddoes not
affect thefunction orperformance ofthe brake
system.
Proper brakeinspection intervalsshould
be followed. Foradditional information, seethe
maintenance logsection ofyour ªNISSAN
Service andMaintenance Guideº.
GUID-6A8 9546B-C41A- 40D8-9756-83B8312AC E54
SDI2654
ENGINE COMPARTMENT
GUID-7E1 E202F-F646 -45EA-96AE -D77C54247 8CE
CAUTION
Never useafuse ofahigher orlower
amperage ratingthanthatspecified on
the fuse boxcover. Thiscould damage
the electrical systemorcause afire.
If any electrical equipment doesnotoperate,
check foranopen fuse.
1. Besure theignition switchandtheheadlight
switch areturned off. 2.
Open theengine hood.
3. Remove thefuse/fusible linkholder coverby
pushing thetab
*
1
and lifting thecover
from theright side
*
2
, then theleftside
*
3
.
4. Locate thefuse thatneeds tobe replaced.
5. Remove thefuse using thefuse puller
located inthe passenger compartment fuse
box.
FUSES
&RQGLWLRQ