NISSAN MAXIMA 2003 A33 / 5.G Navigation Manual

3. Select theSystem Setting key on the
[SETTINGS] screen.4. Select theMap & A/C key .
5. Select the
On key .6. After setting, press the MAP button.
The right section displays the air conditioner
control screen and the left section displays the
map.
When the enlarged view is displayed, the air
conditioner control screen will not be dis-
played.
CHANGING THE DISPLA Y
COLOR
Y ou can change the display color .
INV0259INV0453
INV0464
INV0504
HOW DO I ADJUST THE DISPLAY?
11-16

1. Change to the current vehicle location
screen.
2. Select the
Setting key .
The display shows the [SETTINGS] screen.
3. Select the
System Setting key .
The display shows the [SYSTEM SETTINGS]
screen.4. Select the
Display Setting key .
The display shows the [DISPLA Y SETTING]
screen.
5. Select the
Background key .
When pressed, the display color is changed.6. T ouch the
Previous key .
The [SYSTEM SETTINGS] will be displayed.
The D/N button is used to change the display
color the same way as the
Background key .INV0259
INV0456INV0457
HOW DO I ADJUST THE DISPLAY?
11-17

ADJUSTING THE DISPLA Y
BRIGHTNESS
Y ou can choose the best brightness for the dis-
play .
INFO:

Y ou can have two different brightness set-
tings for the display . One setting for when
the headlights are on and the other setting
when headlights are off.

When the headlights are turned on, the
original factory (brightness) display setting
will adjust to the brightness suitable for
night (dim screen).
1. Change to the current vehicle location
screen.
2. Select the
Setting key .3. Select the
System Setting key .
The display shows the [SYSTEM SETTINGS]
screen.4. Select theDisplay Setting key .
The display shows the [DISPLA Y SETTING]
screen.
INV0259INV0456
HOW DO I ADJUST THE DISPLAY?
11-18

5. T ouch the Darker/Brighter key to adjust the
contrast.
6. T ouch the
Previous key .
The screen returns to the [SYSTEM SETTINGS]
screen.
SETTING AUTOMA TIC BEEP
SOUND
Y ou can set the automatic beep sound. (Acti-
vated during automatic rerouting, etc.)
1. Change to the current vehicle location
screen.
2. Select the
Setting key .
3. Select the
System Setting key on the
[SETTINGS] screen.4. Select the
Beep on/off key .
The display shows the [BEEP ON/OFF] screen.
INV0458
INV0259
INV0459
HOW DO I ADJUST THE DISPLAY?
11-19

5. When turning on/off the beep sound, select
the
On orOff key .
The selected key (
On orOff ) will turn to
green.
INFO:
Press the MAP button to show the map of
the current vehicle location.
HOW TO HANDLE THE DIS-
PLA Y
The display uses liquid crystal and should be
handled with care.
WARNING
Never disassemble the display . It
has some areas with extreme high
voltage. T ouching it may result in se-
rious personal injury .
CAUTION
Never put excessive pressure on the
touch panel. The screen may become
uneven and damage the liquid crystal
display .
CHARACTERISTICS OF LIQUID
CRYSTAL DISPLAY

If the temperature inside the vehicle is es-
pecially low, the display will stay relatively
dim or tend to be slow in the movement of
the images. These conditions are normal;
when the temperature rises, the display will
function normally .

Y ou may notice darker or brighter dots in
the display; this is inherent in monitor dis-
plays and is not malfunction.

Y ou may also notice a remnant of the pre-
vious display image on the screen. This af-
terimage is inherent in displays and is not
abnormal.
INFO:
The screen may be distorted by strong mag-
netic fields.
INV0477
HOW DO I ADJUST THE DISPLAY?
11-20

MAINTENANCE OF THE DIS-
PLAY
CAUTION

T o clean the display , never use a
rough cloth, alcohol, benzine,
thinner , any kind of solvent, or pa-
per towel with chemical cleaning
agent. They will scratch or dete-
riorate the panel.

Do not splash any liquid such as
water or car fragrance on the dis-
play . Contact with liquid will
cause the system to malfunction.
If you need to clean the display screen, use a
dry soft cloth. If additional cleaning is neces-
sary , use a small amount of neutral detergent
with a soft cloth. Never soak the exterior with
water or detergent.
HOW DO I ADJUST THE DISPLAY?
11-21

12 HOW DO I OPERATE THE AUTOMATIC TEMPERATURE
CONTROLS?
Control panel ............................................ 12-2
How to use theAUTObutton .......... 12-3
Using the
ECONbutton .................. 12-4
How to use the
button .............. 12-4
How to use the
button .............. 12-5
How to use the
button .............. 12-5
How to use theOFFbutton .............. 12-5
Fan speed control ..................................... 12-6
Setting back to automa tic control ............. 12-6

CONTROL P ANELThis manual only covers the switch functions.
Please also refer to the vehicle’s owner’s
manual for instructions on “Heater and air con-
ditioner” in the “Heater , air conditioner and au-
dio systems” section.
Start the engine and operate the controls to ac-
tivate the air conditioner .
WARNING

The air conditioner cooling func-
tion operates only when the en-
gine is running.

Do not leave children, disabled
adults, or pets alone in your ve-
hicle. On hot, sunny days, tem-
peratures in a closed vehicle
could quickly become high enough
to cause severe or possibly fatal
injuries to people or animals.
INI0071
HOW DO I OPERATE THE AUTOMATIC TEMPERATURE CONTROLS?
12-2

Do not use the recirculation mode
for long periods as it may cause
the interior air to become stale
and the windows to fog up.

Positioning of the heater and air
conditioner controls should not be
done while driving in order that
full attention may be given to the
driving operation.
HOW TO USE THEAUTOBUT-
TON
This mode may be normally used all year round
as the system automatically works to keep a
constant temperature. Air flow distribution and
fan speed are also controlled automatically .
1. Press the AUTO button.
The automatic temperature control mode will
be displayed on the right.2. T urn the temperature set knob to set the de-
sired temperature.

Adjust the temperature set knob to about
75°F (24°C) for normal operation.

The temperature of the passenger compart-
ment will be maintained automatically . Air
flow distribution and fan speed are also
controlled automatically .
INFO:

T urn the knob to the right to raise the tem-
perature.
T urn the knob to the left to lower the tem-
perature.
3. T o stop the air conditioning, press the
OFF button.
CAUTION

If the engine is not running, air
conditioning and dehumidification
will not be activated.

When the key is in the ACC posi-
tion but the engine is not running,
air is available by pressing the
AUTObutton, but the cooling
function will not operate.
NOTE:

When the ambient temperature is
close to 32°F (0°C), the cooler and
dehumidification functions are not
available.
INV0500
HOW DO I OPERATE THE AUTOMATIC TEMPERATURE CONTROLS?
12-3