navigation NISSAN MAXIMA 2006 A34 / 6.G Navigation Manual

MAP SCROLLING INFORMATIONInformation about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push<SETTING> .
NAV3055
Armada, Maxima, Murano, Pathfinder, Quest, Titan
NAV3029
350Z2. Highlight [Navigation] and push
<ENTER>
.
NAV2752
3. Highlight [Map Scrolling Information] and
push <ENTER> .
3-10
Map settings

NAV2763
Long Range Map View
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.: North Up: Heading Up
NAV2764
INFO:
You can also set the orientation of the map using
the following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Heading] and push <ENTER>.
CHANGING THE BIRDVIEW
TM
ANGLE
This changes the Birdview
TM
angle.
This setting is available only in the Birdview
TM
or
Split (Birdview
TM) mode.
Map settings
3-17

NAV2766
4. Adjust the Birdview
TM
angle by moving the
cursor in the direction of [
]or[
]. 5. Push
<MAP>to return to the current
location map screen.
NAV2764
INFO:
You can also set the Birdview
TM
angle using the
following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Heading] and push <ENTER>
.
4) Highlight [Birdview
TM
Angle] and push
<ENTER> .Map settings
3-19

NAV2767
3. Highlight [Change Map Scale for Left] andpush <ENTER> .
INFO:
[Change Map Scale for Left] is displayed
only when the map view is in the Split (Plan
View) or Split (Birdview
TM) mode.
NAV2768
4. Highlight [Map Scale] and push <ENTER>
.
Adjust the map scale by moving the cursor
in the direction of [+] or [ ].
Use the joystick to adjust the scale of the
map.
After finishing the setup, push <ENTER>
or
<BACK> /
<PREV> to apply the scale
setting.
5. Push <MAP>to return to the current
location map screen.
NAV2750
INFO:
You can also change the scale of the left screen
using the following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Map View] and push <ENTER>.
4) Highlight [Change Map Scale for Left] and push <ENTER> .
Map settings
3-21

NAV2770
3. Highlight the preferred icon and push<ENTER> .
The icon display setting toggles on and off
each time you push <ENTER>.
The indicator of the selected icon illumi-
nates.
NAV2771
4. Push <MAP>to return to the current
location map screen.
The activated landmark icons are displayed
on the map.
NAV2772
INFO:
You can also set the landmark icons using the
following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Landmark Icons] and push <ENTER> .
Map settings
3-23

MAP SYMBOLSThis navigation system uses symbols to display facilities.
NAI0416
3-24
Map settings

After setting the route, select [Start] to begin
route guidance.
Throughout route guidance, the system navi-
gates you through the guide points using visual
and voice guidance.
CAUTION
The navigation system’s visual and voice
guidance is for reference purposes only.
The contents of the guidance may be
inappropriate depending on the situa-
tion.
When driving along the suggested route,
follow all traffic regulations (e.g., one-
way traffic) .
“ROUTE GUIDANCE” (page 9-11)
VOICE GUIDANCE DURING ROUTE
GUIDANCEWhen approaching a guide point (intersection or
corner) , destination, etc. during route guidance,
voice guidance announces the remaining dis-
tance and/or turning direction.
Push<VOICE> /
<GUIDE VOICE> to repeat
voice guidance.
NAI0418
Example of voice guidance&1“In about one quarter mile (400 meters) ,
right (left) turn.”
“Right (left) turn ahead.”
&2“In about one quarter mile (400 meters)
freeway entrance on your right onto (road
number and direction) .”
“Freeway entrance on your right onto (road
number and direction) .”
&3“In about one mile (1.6 kilometers) , exit on
your right.”
“Take the second exit on your right.”
&4“You have arrived at your destination. Ending
route guidance.”
ABOUT ROUTE GUIDANCE
Route guidance
5-7

Locations that you often visit can be stored in
the Address Book. The stored locations can be
easily retrieved to set them as a destination or
waypoint.
INFO:
. The Address Book can store up to 100
locations.
. New information placed in the same storage
position will overwrite the old data.
STORING A LOCATION BY SEARCH-
INGAfter you have searched for a location as
previously described, you can store the location
for future use.
1. Push <SETTING> .
NAV3055
Armada, Maxima, Murano, Pathfinder, Quest, Titan
NAV3029
350Z2. Highlight [Navigation] and push
<ENTER>
.
STORING A LOCATION6-2
Storing a location/route

AVOID AREA SETTINGSAn Avoid Area can be stored.
The Avoid Area is an area that you want to
exclude from a route, such as a road that is
always congested.
Once you store Avoid Areas, the system avoids
those areas when calculating a route.
Up to 5 Avoid Areas can be stored.
1. Push<SETTING> .
NAV3055
Armada, Maxima, Murano, Pathfinder, Quest, Titan
NAV3029
350Z2. Highlight [Navigation] and push
<ENTER>
.
NAV2936
3. Highlight [Avoid Area Settings] and push
<ENTER> .
INFO:
You can also access and store an Avoid
Area from the Address Book.
Storing a location/route
6-7

NAV2946
4. A confirmation message is displayed. Con-firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
NAV2947
INFO:
You can also store a route using the following
procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>
.
3) Highlight [Address Book] and push <ENTER> .
4)Highlight[StoredRoutes]andpush <ENTER> .
5) Highlight [None (Add New)] and push <ENTER> .
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored.
“DELETING A STORED ITEM”
(page 6-28)
. If you have not set any waypoints on the
route, the route cannot be stored.
Storing a location/route
6-13