NISSAN MAXIMA 2008 A34 / 6.G 06IT Navigation Manual

Black plate (54,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
OPERATION WITH SPLIT SCREEN
DISPLAY
When the split screen is displayed, you can
operate the left/right screen.
1. Push<ENTER>while the current location
map screen is displayed.
2. Highlight [Map Settings] and push
<ENTER>.
3. Highlight [Left Settings] or [Right Settings]
and push<ENTER>.
4. Highlight the preferred map view and push
<ENTER>. The indicator of the selected
map view illuminates.
5. Push<MAP>to return to the current
location map screen.
Available map orientations
.North Up:
North is set at the top of the map.
.Heading Up:
The traveling direction is set at the top of the
map.
.Long Range:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
.Map Scale:
A scale appears on the left side of the
screen. This changes the scale of a map.
.Birdview
TMAngle:
This changes the BirdviewTMangle.
3-18Map settings

Black plate (55,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Other settings
You can also change the scale of the left screen
using the following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Map Settings] and push
<ENTER>.
4) Highlight [Left Settings] or [Right Settings]
and push<ENTER>.You can display icons on the map and view
information about destinations or landmarks.
DISPLAYING LANDMARK ICONS
This allows you to display or hide the landmark
icons by type.
Landmark icons that can be displayed
.Restaurant
.
Gas Station
.
Hotel
.
AT M
.
Rest Area
1. Push<ENTER>while the current location
map screen is displayed.
2. Highlight [Landmark Icons] and push
<ENTER>.
LOOKING AT INFORMATION ON
THE MAP
Map settings3-19

Black plate (56,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Highlight the preferred icon and push
<ENTER>. The icon display setting toggles
on and off each time you push<ENTER>.
The indicator of the selected icon illumi-
nates.
4. Push<MAP>to return to the current
location map screen. The activated landmark
icons are displayed on the map.
Other settings
You can also set the landmark icons using the
following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Landmark Icons] and push
<ENTER>.
INFO:
The landmark icons are not displayed on the
map screen when the map scale is set to 1/4
mile (500 m) or higher in Plan View, or to 1 mile
(2 km) or higher in Birdview
TM.
Setting by voice command
1. Push<TALK>located on the steering
switch.2. After the tone sounds, speak a command.
.To display all of the landmark icons:
“Landmark Icons”
.To display the landmark icons of the
specified POIs:
Landmark Icons <
POI Category>”
MAP SCROLLING INFORMATION
Information about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push<SETTING>.
2. Highlight [Navigation] and push<ENTER>.
3-20Map settings

Black plate (57,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Highlight [Map Scrolling Information] and
push<ENTER>.
4. Highlight the preferred information item and
push<ENTER>. The indicator of the
selected information item illuminates.
Available information items:
.Address Book Icons.Destination/Waypoint Icons.Building Names.Latitude/Longitude Info.
5. Push<MAP>to return to the current
location map screen.
Move the cross pointer to the set location to
display the information.
Map settings3-21

Black plate (58,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
MAP SYMBOLS
This navigation system uses symbols to display facilities.
3-22Map settings

Black plate (59,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Map settings3-23

Black plate (60,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Road color
The road types are differentiated by colors.
Freeway: Pink with red border
Main road: Amber
Narrow street: Gray
Road with incomplete map data: Dark green
Traffic information on map
With a subscription to XM®NavTrafficTMservice,
traffic information is displayed.
“VIEWING AVAILABLE TRAFFIC IN-
FORMATION” (page 7-3)
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event: Purple
dashed arrow
Traffic information icons:
Accident
Closed road
Information
Road work
Slippery road
Weather
Incident
3-24Map settings

Black plate (10,1)
4 Setting a destination
Model "NAV2-N" EDITED: 2007/ 3/ 8
Destination screen.............................................. 4-2
Basic operation............................................. 4-2
Changing the region....................................... 4-3
Setting a Street Address................................. 4-4
Setting a point of interest................................. 4-5
Setting your home........................................4-13
Setting from Address Book............................4-13
Setting a nearby place..................................4-14
Setting a previous destination.........................4-16
Setting the previous starting point....................4-17
Setting from stored routes..............................4-17
Setting by phone number...............................4-18Setting a freeway entrance/exit........................4-19
Setting an Intersection..................................4-21
Setting a City Center....................................4-22
Setting from map.........................................4-23
Operations after setting a destination....................4-24
Available setting items...................................4-25
Adjusting the location of the destination............4-25
Adding additional destinations to a route...........4-26
Storing a location.........................................4-26
Viewing information about the searched
location......................................................4-26

Black plate (62,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
There are several methods you can use to set
your destination. Understand the advantages of
each method and select the best method for
finding and setting your destination.
BASIC OPERATION
1. Push<DEST>.
2. Highlight the preferred destination setting
method and push<ENTER>.
Available setting items
.Street Address:
Searches for a destination by address.
.Points of Interest:
Searches for a destination from various
categories of businesses or locations..Home:
Searches for a route from the current
location to the previously stored home
destination.
.Address Book:
Searches for a destination from the list of the
stored locations.
.Nearby Places:
Searches for a business or location near
your vehicle.
.Previous Dest.:
Searches for a destination from the previous
destinations.
Available setting items (Next page
screen)
.Previous Starting Point:
Sets the previous starting point as the
destination..Stored Route:
Selects a stored route.
.Phone Number:
Searches for a POI destination by the
telephone number.
INFO:
It will not search for residential phone
numbers.
.Freeway Entrance/Exit:
Searches for a destination from a freeway
entrance/exit.
.Intersection:
Searches for a destination from intersec-
tions.
.City Center:
Sets the center of a city as the destination.
DESTINATION SCREEN
4-2Setting a destination

Black plate (63,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
CHANGING THE REGION
When setting a destination, you can narrow
down the place by specifying the region or city.
Specifying the region
1. Push<DEST>.
2. Highlight [Change Region] and push
<ENTER>.
3. Highlight the preferred region and push
<ENTER>.
Available setting items
.US1: CA, NV
.US2: AZ, CO, ID, MT, NM, OR, UT, WA, WY
.US3: IA, KS, MN, MO, ND, NE, SD
.US4: AR, LA, MS, OK, TX
.US5: IL, IN, MI, WI
.US6: DC, DE, KY, MD, OH, PA, VA, WV
.US7: CT, MA, ME, NH, NJ, NY, RI, VT
.US8: AL, FL, GA, NC, SC, TN
.US9: AK
.US10: HI
.Canada
INFO:
.It is also possible to select a region by
touching the map on the right side of the
screen.
.It is not possible to search for a route from
the continental United States to Hawaii.
Specifying the city
When searching for a destination with “Street
Address”, “Points of Interest”, “Freeway En-
trance/Exit”, “Intersection” or “City Center”, you
can narrow down the search by specifying the
city.
1. Select [City] on input screen and push
<ENTER>.
2. Enter the name of the city, highlight [List]
and push<ENTER>.
A list screen is displayed.
INFO:
Highlight [Last 5 Cities] and push
<ENTER>to display 5 cities recently set
as destinations.
Setting a destination4-3