clock NISSAN MURANO 2007 1.G Navigation Manual

NAI0414
BIRDVIEWTM
The joystick allows movement in the following
ways.
Keep tilting the joystick to continuously move
across the map in that direction.
&1Rotates the map clockwise.
&2Rotates the map counterclockwise.
&3Moves the cross pointer on the map upward.
&4Moves the cross pointer on the map down-
ward.
Once you start moving on the map, the cross
pointer appears.
3-8Map settings

8 Other settings
Settings screen
(Armada, Maxima, Murano, Pathfinder, Quest, Titan) . . . 8-2
Basic operation............................................. 8-2
Display settings ............................................. 8-3
System settings screen................................... 8-6
Language and unit settings............................... 8-7
Clock settings .............................................8-10
Setting screen (350Z).......................................8-12
Basic operation...........................................8-12Display settings ...........................................8-13
Volume adjustment.......................................8-16
Clock settings .............................................8-17
Language and unit settings.............................8-19
Map color settings............................................8-22
Adjusting the current vehicle location....................8-23
Reset all navigation settings to default..................8-25

SYSTEM SETTINGS SCREEN
Allows you to set system settings such as
language/measurement unit setting.
Basic operation
1. Highlight [System Settings] and push
<ENTER>.
2. Highlight the preferred adjustment item and
push<ENTER>.
3. Push<BACK>/<PREV>to return to the
previous screen. Push<MAP>to return to
the current location map screen.
NAV3030
Available setting items
.Language/Unit:“LANGUAGE AND UNIT SETTINGS”
(page 8-7)
.Clock:
“CLOCK SETTINGS” (page 8-10).Beep Setting:
Select to toggle the beep function between
on and off. The indicator light illuminates
when the beep function is set to on.
The beep that sounds when pushing and
holding a button or when a prohibited
operation is performed cannot be set to off.
8-6Other settings

CLOCK SETTINGS
This allows you to change the clock settings.
Basic operation
1. Highlight [Clock] and push<ENTER>.
2. Highlight the preferred adjustment item.
3. Use the joystick to adjust to the preferred
setting.
4. After setting, push<ENTER>or<BACK>/
<PREV>to apply the setting.
5. Push<BACK>/<PREV>to return to the
previous screen. Push<MAP>to return to
the current location map screen.
NAV3036
Setting items
.Hour:
Set the hour.
Adjust the hour by tilting the joystick in the
direction of [+] or [−].
.Minutes:
Set the minutes.
Adjust the minutes by tilting the joystick in
the direction of [+] or [−]..Auto Adjust:
The time currently set is reset to the GPS
time.
.Daylight Saving Time:
Select to toggle the daylight saving time
setting between on and off. The indicator
light illuminates when the daylight saving
time setting is set to on.
8-10Other settings

The navigation system can be customized to
make it easier for you to use.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight the preferred setting item and
push<ENTER>.
NAV3037
Available setting items
.Display:“DISPLAY SETTINGS” (page 8-13)
.Navigation:
Allows you to adjust various settings of the
navigation system. Refer to the instructions
in the relevant sections.
.Volume and Beeps:
“VOLUME ADJUSTMENT”
(page 8-16).Clock:
“CLOCK SETTINGS” (page 8-17)
.Language/Unit:
“LANGUAGE AND UNIT SETTINGS”
(page 8-19)
SETTING SCREEN (350Z)
8-12Other settings

CLOCK SETTINGS
This allows you to change the clock settings.
Basic operation
1. Highlight [Clock] and push<ENTER>.
2. Highlight the preferred adjustment item and
push<ENTER>.
3. Use the joystick to adjust to the preferred
setting.
Push<ENTER>to set ON/OFF.
4. After setting, push<ENTER>or<BACK>
to apply the setting.
5. Push<BACK>to return to the previous
screen. Push<MAP>to return to the
current location map screen.
NAV3008
Setting items
.On-screen Clock:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates
when the clock display is set to on.
.Clock Format:
Use the joystick to change the clock format
between 12-hour and 24-hour..Offset Adjust:
Use the joystick to adjust the offset value
(between−59 and +59) .
.Daylight Saving Time:
Select to toggle the daylight saving time
setting between on and off. The indicator
light illuminates when the daylight saving
time setting is set to on.
Other settings8-17

SETTING SCREEN (ARMADA, MAXIMA, MURANO, PATHFINDER, QUEST, TITAN)
<SETTING>
Display Brightness/Contrast
page 8-3
Display off
page 8-4
System Settings Language/Units Language
page 8-7
Unit
page 8-9
Clock Hours
page 8-10
Minutes
page 8-10
Auto Adjust
page 8-10
Daylight Saving Time
page 8-10
Select Time Zone
page 8-10
Beep Setting
page 8-6

Volume and Beeps Guidance Volume
page 8-16
Guidance Voice
page 8-16
Button Beeps
page 8-16
Clock On-screen Clock
page 8-17
Clock Format
page 8-17
Offset Adjust
page 8-17
Daylight Saving Time
page 8-17
Time Zone
page 8-17
Language/Units Select Language
page 8-19
Select Units
page 8-21

A
About route guidance............................... 5-7
About the map DVD-ROM........................ 9-15
Adding a destination or waypoint................... 5-5
Adding additional destinations to a route........ 4-52
Address book........................................ 9-2
Adjusting the current vehicle location............ 8-23
Adjusting the location of the destination......... 4-51
Adjusting voice guidance volume................. 2-37
Automatic reroute.................................... 9-2
Avoid area settings.................................. 6-7
B
Background Color................................. 8-15
Basics of voice guidance......................... 9-11
Birdview
TM................................. 3-3, 3-8, 9-3
Brightness..................................... 8-4, 8-14
C
Change/edit route................................. 5-15
Changing the BirdviewTMangle.................. 3-17
Changing the scale of a map.............. 2-19, 3-12
Changing the scale of the left screen............ 3-20
Character (letter and number) input screen..... 2-23
Characteristics of a liquid crystal display........ 9-20
Clock settings............................... 8-10, 8-17
Confirming a route............................ 5-4, 5-26
Confirming by simulation.......................... 5-28
Control panel......................................... 2-3
Current vehicle location............................. 9-3
Customer assistance.............................. 10-2
Customizing nearby places....................... 6-33
D
Deleting a route............................. 2-33, 5-35
Deleting a stored item............................. 6-28
Deleting a stored item individually................ 6-28
Deleting all stored items .......................... 6-31
Deleting an individual item on the map.......... 6-30
Destination screen................................... 4-2
Detailed route priorities............................ 5-13
Detour ................................................ 9-2
Directions provided and the distances to
guide points........................................ 9-11
Disc replacement.................................. 9-18
Display of current vehicle location.................. 9-3
Display settings............................... 8-3, 8-13
Displaying landmark icons......................... 3-22
E
Editing a route..................................... 5-19
Editing the address book......................... 6-15
Editing the avoid area............................. 6-27
Editing the stored home and location............ 6-16
Editing the stored route........................... 6-25
Editing the stored tracking........................ 6-26
F
For safe operation................................... 1-2
Free zoom................................... 2-19, 3-12
Functions disabled while driving.................. 2-13
G
Guidance screens and preview mode............. 5-8
H
Heading Up........................................ 3-16
How to handle the display........................ 9-20
How to handle the DVD-ROM.................... 9-19
How to order map DVD-ROM updates.......... 9-15
How to store your home.......................... 2-20
How to use this manual............................. 1-2
How to view map screen.......................... 2-14
I
Incorrect display of vehicle position................ 9-6
Information screen (350Z only)..................... 7-2
L
Language setting............................. 8-7, 8-19
Laser product........................................ 1-4
List screen.......................................... 2-27
Long Range Map View............................ 3-16
M
Maintenance of the display........................ 9-20
Map color settings................................. 8-22
Map DVD-ROM............................. 9-15, 10-6
Map DVD-ROM drive location.................... 9-16
Map icons.......................................... 3-22
Map menu screen.................................. 2-10
Map scale.......................................... 3-13
Map screen types.................................. 2-15
Map scrolling information.......................... 3-10
Map symbols....................................... 3-24
Map types............................................ 3-2
Menu screen types and how to operate........... 2-7