NISSAN MURANO 2012 2.G 08IT Navigation Manual

Black plate (122,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-8
Storing location/route
.
[Resize Area]: Adjusts the range of the Avoid Area.
“Resize Area” (page 6-16)
.
[FWY]:Avoids Freeways.
“FWY” (page 6-17)
.
[Delete]:Deletes the avoid area.
“Delete” (page 6-17)
8. After finishing the setting, highlight [OK] and push <ENTER> . Items stored in the Address Book can be
modified. These settings can be edited to make
the navigation system more useful.
BASIC OPERATION1. Push
<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push <ENTER> .
4. Highlight the preferred item and push <ENTER> .Available items.[Stored Location]:
Edits the information of a stored home and
Address.
“Editing stored home and address”
(page 6-8)
. [Stored Routes]:
Edits the information of a stored route.“Editing stored route” (page 6-14) .
[Stored Tracking]:
Edits the information of a stored tracked
route.
“Editing stored tracking” (page 6-14)
. [Avoid Area]:
Edits the information of a stored Avoid Area.“Editing avoid area” (page 6-15)
. [Delete Stored Items]:
Deletes a stored location or route.“Delete stored items” (page 8-10)
. [Transfer Address Book]:
Imports or exports the data of the stored
items using a USB memory.
EDITING STORED HOME AND AD-
DRESS1. Highlight [Stored Location] and push
<ENTER> .
EDITING ADDRESS BOOK

Black plate (123,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
2. Highlight the stored home location or pre- ferred stored address and push <ENTER>.
INFO:
Highlighting [Sort] displays a list of various
sort functions.
To use the sort functions, stored locations
must be set in advance.
“Storing location” (page 6-2)
3. Highlight the preferred item and push <ENTER> .Available setting items.[Edit]:
Edits the stored address information.
. [Move Location]:
Adjusts the location of the stored address.
. [Delete]:
Deletes the stored address. .
[OK]:
Applies the settings.
Other settingsA stored address can also be edited using the
following procedure.1. Push <DEST>.
2. Highlight [Address Book] and push <ENTER> .
3. Highlight [Store/Edit] and push <ENTER>.MINOR ADJUSTMENT OF HOME OR
STORED ADDRESSWhen [Edit] is selected, you can edit the
following items of the home or stored location
can be edited.
. [Show Icon on Map]
. [Name] (only for stored locations) .
[Voicetag] (only for stored location)
. [Icon]
. [Sound]
. [Direction]
. [Distance]
. [Phone No.]
. [Group] (only for stored locations)
. [Entry Numbers] (only for stored locations)
Show icon on mapDisplays the home icon or the stored address
icon on the map.1. Highlight [Edit] and push <ENTER>.
2. Highlight [Show Icon on Map] and push <ENTER> .
3. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Storing location/route
6-9

Black plate (124,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-10
Storing location/route
Name (only for stored locations)Changes the name of a stored location.1. Highlight [Edit] and push <ENTER>.
2. Highlight [Name] and push <ENTER>.
A character input screen is displayed.3. Enter the preferred name for the stored location.
“How to input letters and numbers”
(page 2-14)
4. Highlight [OK] and push <ENTER>.
The name is stored.
Voicetag (only for stored locations)Stores the voicetag for the stored location. The
voicetag allows you to set the stored location as
a destination using Voice Recognition.1. Highlight [Voicetag] and push <ENTER>.2. Highlight [Store] and push <ENTER>.
3. A beep sounds, and the system enters the
voice command reception mode.
4. Speak the name/word to be used as Voicetag.
5. The Voicetag is stored, provided the system recognizes it.
INFO:
. A Voicetag cannot be stored, overwritten or
played while driving.
. The Address Book can store up to 100
Voicetags.
. Highlight [Play] to confirm the stored Voice-
tag.
. Highlight [Delete] to delete a stored Voice-
tag.
. If a Voicetag is already stored, select
[Restore] to re-record the Voicetag.

Black plate (125,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
IconChanges the icon of the home or stored address
to the preferred one. By changing the icons, the
usage of the [By Icon] option of the sort function
can be optimized more effectively ([Sort] menu
situation) .1. Highlight [Icon] and push <ENTER>.
A list of icons is displayed.2. Highlight the preferred icon and push <ENTER> . 3. The icon is changed.
SoundSets the tone of the alarm that sounds when the
vehicle approaches the home or a stored
address.1. Highlight [Sound] and push
<ENTER>.
A sound list is displayed.2. Select the preferred alarm tone and push <ENTER> .
The indicator of the selected alarm tone
illuminates. Sound list:
None
Chime
Melody
Sound
Dog
Cat
Wave
Church bell
Music Box 1
Music Box 2
Marimba
Trumpet
Horn
ScratchDirectionSets the alarm to sound when approaching from
a specific direction.
Storing location/route
6-11

Black plate (126,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-12
Storing location/route
1. Highlight [Direction] and push <ENTER>.
A map screen with the home or stored
location located on the map center is
displayed.2. Set the direction that sounds the alarm and push <ENTER> .
The selected direction is set.
INFO:
After the direction is set and [Direction] is
selected and set again, a confirmation
message is displayed. Confirm the contents
of the message, highlight [Yes] and push
<ENTER> . The set direction is overwritten.
DistanceSets the alarm to sound when reaching a
specific distance to the home or stored address.1. Highlight [Distance] and push <ENTER>.
2. Highlight the preferred distance option and
push <ENTER> . The indicator of the
selected distance illuminates.
Available distance options: . 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone No.Stores the telephone number of the home or a
stored location.

Black plate (127,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
1. Highlight [Edit] and push <ENTER>.
2. Highlight [Phone No.] and push <ENTER>.
The telephone number entry screen is
displayed.3. Enter the telephone number of the home or stored location.
“Number input screen” (page 2-15)
4. Highlight [OK] and push <ENTER>.
The telephone number is stored.
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations)This groups the stored locations.
By grouping the stored locations, the [By Group]
option of the sort function can be used more
effectively in the [Sort Entries] mode.1. Highlight [Group] and push <ENTER>.2. Highlight the preferred group and push
<ENTER> .
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.
Entry Number (only for stored locations)Index the position numbers of any two stored
locations in the list.1. Highlight [Entry Number] and push <ENTER> .
A list of stored locations is displayed.2. Highlight the stored addresses that you want to change and push <ENTER>.
The position numbers of the selected stored
locations are changed.
Storing location/route
6-13

Black plate (128,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-14
Storing location/route
EDITING STORED ROUTE1. Highlight[StoredRoutes]andpush <ENTER> .
2. Highlight the preferred stored route and push <ENTER> .3. Highlight the preferred item to edit from the
list on the right side of the screen and push
<ENTER> .
4. After finishing the editing, highlight [OK] and push <ENTER> .
INFO:
If [Store Current Route] is selected, the system
stores the current route.
Available setting items: . [Rename]:
Changes the name.
“Character (letters and numbers) input
screen” (page 2-14)
. [Replace]:
Overwrites the stored route to the current
route.
. [Delete]:
Deletes the stored route.
. [OK]:
Applies the settings.
EDITING STORED TRACKING
1. Highlight [Stored Tracking] and push
<ENTER> .
2. Highlight a stored tracked route and push <ENTER> . When the “ON” indicator is not
illuminated, push <ENTER>. The indicator
illuminates, and the Edit screen is displayed.
If <ENTER> is pushed while the “ON”
indicator is illuminated, the indicator turns
off.3. Highlight the preferred item and push
<ENTER> .
Available setting items (Current tracking): . [View Track]:
Displays the tracked route up to the current
location.
. [Delete]:
Deletes the stored current tracking.
. [OK]:
Applies the settings.

Black plate (129,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
Available setting items (Stored tracked routes): . [View Track]:
Displays a stored tracked route on the map.
. [Rename]:
Changes the name.
“Character (letters and numbers) input
screen” (page 2-14)
. [Replace]:
Overwrites the stored tracked route to the
current tracked route.
. [Delete]:
Deletes the stored tracked route.
. [OK]:
Applies the settings.
Displaying tracked routeThe stored tracked route can be displayed on
the map as necessary.1. Highlight [Stored Tracking] and push
<ENTER> .
2. Highlight a tracked route to display on the map screen, and push <ENTER>.The
“ON” indicator illuminates, and the Edit
screen is displayed.3. After confirming the location to display the tracked route, highlight [OK] and push
<ENTER> . The screen returns to the previous screen.
4. Push <MAP>to return to the current
location map screen.
INFO:.
Current tracking is displayed up to 6 miles (10 km) .
.
Stored tracking is displayed up to 12miles (20 km) .
EDITING AVOID AREA1. Highlight [Avoid Area] and push <ENTER>.
2. Highlight the preferred Avoid Area and push <ENTER> .
Storing location/route
6-15

Black plate (130,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
6-16
Storing location/route
3. Highlight the preferred items and push <ENTER> .
Available setting items:
.
[Rename]: Changes the name.
.
[Move Location]:Adjusts the location of the Avoid Area.
.
[Resize Area]:
Adjusts the range of the Avoid Area.
.
[FWY]:Avoids freeways.
.
[Delete]:Deletes the Avoid Area.
.
[OK]:Applies the setting. 4. After finishing the setting, highlight [OK] and
push <ENTER> .
INFO:
An Avoid Area can be added by selecting [Add
New].“Storing avoid area” (page 6-7)
RenameChanges the name of an Avoid Area.1. Highlight [Rename] and push <ENTER>.A
character input screen is displayed.
2. Enter the preferred name for the avoid area.
3. Highlight [OK] and push <ENTER>. The
name is stored.
Move LocationAdjusts the location of the Avoid Area.1. Highlight [Move Location] and push <ENTER> .
2. Adjust the location of the Avoid Area.
3. After adjusting the location, push <ENTER> .Resize AreaAdjusts the range of the Avoid Area.

Black plate (131,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
1. Highlight [Resize Area] and push <ENTER> .
2. Highlight the range from 5 available levels.
3. After highlight ing the range, push
<ENTER> .
INFO:
Push <ZOOM IN> or<ZOOM OUT> (if so
equipped) to change the scale of the map.
FWYSets the route to avoid freeways.1. Highlight [FWY].
To include freeways in the Avoid Area, push
<ENTER> to illuminate this indicator.
2. The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include a freeway.
INFO:
If the current vehicle location is set to an Avoid
Area, the system will not provide route guidance.
DeleteDeletes the Avoid Area.
1. Highlight [Delete] and push <ENTER>.2. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.
Storing location/route
6-17