NISSAN MURANO 2016 2.G 08IT Navigation Manual

Black plate (21,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Available itemsGUID-C2FBA0B2-BF88-4619-BDC1-6DA70803264A.[Destination]:
Displays the destination screen. It is the
same screen that appears when <DEST>is
pushed.
“4. Setting destination”
. [Route]:
Displays the route screen. It is the same
screen that appears when <ROUTE>is
pushed.
“5. Route guidance”
. [Info]:
Displays the information screen. It is the
same screen that appears when <INFO>is
pushed.
“7. Viewing technical information”
. [Settings]:
Displays the settings screen. It is the same
screen that appears when <SETTING>is
pushed.
“8. Other settings”
LIST SCREENGUID-1D2772EE-9BD4-43E3-9C28-AC2DD13CDE20
NGT0024
After searching for a point of interest, a list
screen is displayed.
Depending on the list displayed, it can be
sorted.
Items displayed in a listGUID-794320F6-2EB2-45BC-A4E5-97280E9E41ED
*1Highlight the preferred item from the list
and push <ENTER> to select it. If a
location or facility name is not completely
displayed (due to length) , highlight the item
to display the hidden part of the name.
*2Distance from the current location
*3Direction to the point of interest
*4If the entire list cannot be displayed on the
screen, the system displays the total
number of items in the list and the entry
number of the selected item. Scroll the list
using the multi-function controller.
*5An item that starts with the selected letter
will be displayed at the top of the list.
Getting started2-13

Black plate (22,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-14Getting started
*6Highlight and push<ENTER>to sort the
list in the original order.
*7When the list is sorted by the shortest
distance, the selected location can be
confirmed in the preview on the right side
of the screen.
*8Highlight and push <ENTER>to modify
search conditions.
GUID-C18EBD96-640E-4A66-BA63-1A9B08A7C36DWith this system, the same operations as those
for the multi-function controller are possible
using the touch panel operation.
This manual describes the operations using the
multi-function controller.
For the operations that differ from those of the
multi-function controller and for useful methods
for using the touch panel operation, refer to each
section.
EXAMPLE OF TOUCH PANEL OPERA-
TION
GUID-87047137-7434-431D-91BD-EE4CA89ECC46Here, the operation examples performed with
the touch panel operation are described.
Selecting itemGUID-0BC860AD-0BD8-4352-A8A7-2B96A34BF6A8
NGT0025When the item is touched, the next screen is
displayed.
Adjusting volume and othersGUID-298337AF-59C8-4498-9048-2C8992870D58
NGT0026Touch [+] or [−] located on the right and left of
the bar graph to perform the adjustment.
Scrolling message or listGUID-B8DFEF35-603F-4A66-A31B-EF2B6908D079
NGT0027Touch [] or [] to scroll the message or list.
Touch [
] or [] to skip to the next page.
TOUCH PANEL OPERATION

Black plate (23,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Inputting letters and numbersGUID-5321D12D-8B9B-4BD0-9E01-850C0C40CC18
NGT00281. Touch the letter or number.
2. To delete a character, touch [Delete]. Pushand hold [Delete] to delete all of the
characters.
GUID-F21D3221-98F6-4FC3-A8F3-F5E34CA54E61
CHARACTER (letters and numbers) IN-
PUT SCREEN
GUID-3818DD56-ABE1-4B5C-B96A-5CBEFF9F160BWhen setting a destination, searching for a
facility or editing the stored locations, etc.
alphanumeric characters must be entered into
the system.
NGT00541. Use the multi-function controller to highlight
a character on the displayed keyboard.
NGT00552. Push <ENTER>. The highlighted character
is entered.
NGT00563. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last character
entered.
Push and hold <BACK>to delete all the
characters entered.
Highlight [Space] and push <ENTER>to
enter a space.
NGT00574. After finishing the entry, highlight [List] and push <ENTER>.
Getting started2-15
HOW TO INPUT LETTERS AND
NUMBERS

Black plate (24,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-16Getting started
INFO:
. Push <BACK> on the control panel to
return to the previous screen, but only after
deleting all the characters entered.
. When [BACK] is touched on the screen, the
screen returns to the previous screen even
when characters have been entered.
. When text has been entered and the number
of matching list items has been narrowed
down enough so that they fit on the screen,
the list screen appears automatically.
NGT0058Symbol input screen
INFO:
Symbol keys are displayed by highlighting
[Symbols] and pushing <ENTER>. Alphabet
keys are displayed by highlighting [A-Z] and
pushing <ENTER>.
NUMBER INPUT SCREENGUID-59EBC7C6-C512-46E3-BB3B-8D7F181E6D23A phone number or a street number can also be
entered as a search method to look for a
destination.
INFO:
Only the locations included in the map data
database can be searched for by a phone
number.
NGT00591. Use the multi-function controller to highlight a number on the displayed keyboard.
NGT0060
2. Push <ENTER>. The highlighted number is
entered.
NGT00613. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last number
entered.
Push and hold <BACK>to delete all the
numbers entered.
NGT00624. After finishing the entry, highlight [List] and push <ENTER>.

Black plate (25,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
INFO:
. <BACK> can be pushed on the control
panel to return to the previous screen, but
only after deleting all the numbers entered.
. When [BACK] is touched on the screen, the
screen returns to the previous screen even
when numbers have been entered.
GUID-BB7E41FA-6BB3-465E-8C16-A395BBA2CB31Push <ENTER> while the current location map
screen or a scrolled map screen is displayed to
display the menu corresponding to that screen.
This menu can be used to access helpful
functions quickly, such as setting a destination
and searching for points of interest nearby.
To select a menu item, use the method
described earlier in this manual.
“Menu screen and how to operate”
(page 2-10)
INFO:
With the touch operation, the same screen can
be displayed by touching [Map Menu] located
on the map screen.
CURRENT LOCATION MAP SCREENGUID-CC966A19-43AC-416C-A3F3-7F2A225535FC
NGT0029If <ENTER> is pushed while the current
location map screen is displayed, the following
options are available. .
[Store Location]:
Store the current vehicle location in the
Address Book. The stored location can be
retrieved as necessary to set it as a
destination (waypoint) .
“Storing location” (page 6-2)
. [Nearby Places]:
Search for points of interest near the current
vehicle location, such as restaurants and
gas stations, etc.
“Finding nearby place” (page 4-5)
. [Map View]:
Perform map operations such as the switch-
ing of map type and the setting of map
orientation and scale.
“3. Map settings”
. [Map Icons]:
Select map icons of certain points of interest
(such as restaurants and gas stations, etc.)
to be displayed on the map around the
current vehicle location.
“Displaying map icons” (page 3-17)
. [Store Tracking]:
Store in the Address Book the route
travelled from the starting point to the
current location.
“Storing tracked route” (page 6-6)
Getting started2-17
MAP MENU SCREEN

Black plate (26,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-18Getting started
SCROLLED LOCATION MAP SCREENGUID-A9C2F142-E2DD-4EEB-BF4B-430BF74ECE68
NGT0030If<ENTER> is pushed while a scrolled map
screen is displayed, the following options are
available.
. [New Dest.]:
Set the destination to the map location
where <ENTER> was pushed. If a destina-
tion is already set, the location will be set as
the new destination.
“Setting point on map” (page 4-19)
. [Add to Route]:
Set the map location where <ENTER>was
pushed as a destination or a waypoint.
This is available only when the suggested
route is already set.
“Setting destination or waypoint”
(page 5-14)
. [Nearby Places]:
Search for points of interest near the map
location where <ENTER>was pushed and set them as a destination or waypoint.
Use the same search method as the one for
[Places].
“Finding nearby place” (page 4-5)
. [Store Location]:
Store in the Address Book the map location
where <ENTER> was pushed. The stored
location can be retrieved to set it as a
destination or waypoint.
“Storing location” (page 6-2)
. [Delete]:
Delete a stored location. To delete it, place
the cross pointer over the corresponding
icon.
. [Incident Detail]:
This function can be selected only when the
traffic information icon is displayed.
Display the details of the traffic information
icon.
Place the cross pointer over the icon you
want to check.
INFO:
Incident details are a feature of Traffic Informa-
tion, and that a NavTraffic subscription is
required in order to receive Traffic Information.
GUID-C0C85DD7-5544-4D74-A724-F0326DC92F79
HOW TO STORE HOME LOCATIONGUID-EAAA43F1-D5A0-4847-BF2D-4183C54BA25BIf a home location is already stored in the
Address Book, it can be easily retrieved to set
the route to the stored home location.
The procedure to store the home location is the
same as for storing any other location.
“4. Setting destination”
As an example, the procedure for storing the
home location by searching for a destination by
address is described here.
NGT00311. Push <DEST>.
2. Highlight [Home (Add New)] and push
<ENTER>.
STORING HOME LOCATION/
ADDRESS

Black plate (27,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NGT00323. A confirmation message is displayed. Con-firm the contents of the message, highlight
[Yes] and push <ENTER>.
NGT00334.Highlight [Street Address] and push
<ENTER>. A character input screen is
displayed.
NGT00345. Enter the address of the home location,
highlight [OK] and push <ENTER>.
“Finding address” (page 4-4)
The map screen is displayed.
NGT00356. Adjust the location of your home using the muti-function controller, if necessary.
7. After adjusting the location, push
<ENTER>.
NGT00368.A message is displayed and the home
location is stored.
NGT00669. Highlight [OK] and push <ENTER>.
10. Push <MAP> to return to the current
location map screen. The home icon is
displayed on the map.
INFO:
The same setting can also be performed by
pushing <SETTING> and highlighting [Naviga-
tion].
“Storing location by searching” (page 6-2)
Getting started2-19

Black plate (28,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-20Getting started
GUID-7A83FB78-9705-4073-94D4-BBF4B9200B12
SEARCHING FOR DESTINATIONGUID-66346E6C-FF12-4C98-824C-FD5B49256E6EAs an example, the method for setting a
restaurant as the destination using [Places] is
described here.
NGT00371. Push<DEST>.
2. Highlight [Places] and push <ENTER>.
NGT00383. Highlight [Nearby RESTAURANT] and push
<ENTER>.
INFO:
The search can also be narrowed down by
selecting [All Categories or Name] or
[ZAGAT] on this screen. By selecting [All
Categories or Name], the area, name of
facility, etc. can be specified. By selecting
[ZAGAT], restaurants registered in the ZA-
GAT database can be searched and sorted
by its rating regarding food, decor, cost,
service, etc.
NGT00394. Highlight the preferred restaurant from the list and push <ENTER>.
INFO:
.The position of the selected location is
displayed in the preview on the right side
of the screen.
.If there is a route already in progress, onlyplaces along the current route will be
listed. Turn off [Show Along Route] at the top of list to display all nearby places.
NGT00405. The entire route is shown on the map.
Highlight [Start] after confirming the location
of the displayed destination, and push
<ENTER>.
The system sets the destination to the
selected location and starts calculating a
route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc. if necessary.
“Procedures after setting destination”
(page 5-2)
SETTING DESTINATION

Black plate (29,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
STARTING ROUTE GUIDANCEGUID-DA651AA9-020C-41C5-BA6D-66A6FB6C5D71After setting the destination and performing
route calculation, the suggested route is dis-
played.
NGT00401. Highlight [Start] and push<ENTER>.
NGT00422. Once route guidance is started, the system
navigates through the guide points using
visual and voice guidance.
NGT00433.When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection in the left screen.
Push <MAP> to switch to the full map
screen.
NGT00444. When arriving at the destination, route
guidance automatically ends.
CANCELING ROUTEGUID-28102B3C-B6FB-4921-B899-6DBFE8FCB7E6Delete a route that is already set according to
the following procedure.
NRG00191. Push <ROUTE>.
2. Highlight [Cancel Route] and push
<ENTER>.
NGT00463. A confirmation message is displayed. High-
light [Yes] and push <ENTER>.
Getting started2-21

Black plate (30,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-22Getting started
INFO:
. If a route is canceled, [Cancel Route]
changes to [Resume Route].
Highlight [Resume Route] and push
<ENTER> to reactivate the canceled route.
This is available only until a new route is set
or a currently set destination is deleted.
. The above step does not delete the
destination that has been set. To delete a
destination, push <DEST>and highlight
[Delete Destination], then push <ENTER>.
“Delete destination” (page 4-20)
GUID-EC233EBE-1592-4D8E-972F-E2F3F43A1E61
HOW TO VIEW MAP SCREENGUID-447D71E9-7977-4E36-AC1E-877BED82B344The navigation system displays various informa-
tion on the map screen.
Screen informationGUID-4CA74274-5369-4F36-861A-EFA2308666F6
NGT0047
*1Vehicle icon:
Indicates the current vehicle location and
the direction of travel.
*2Starting point:
Displays the vehicle location, with which the
route is set, as the starting point.
*3Guide point:
Indicates a guide point on the route.
*4Waypoint:
Displays locations between the starting
point and the destination. A maximum of 5
waypoints can be set.
OPERATING MAPS