NISSAN MURANO 2016 3.G Nissan Connect Navigation Manual


> (GLW    0RGHO 1&*1-1 @
INFO:
If a route is set, the route menu screen will be
displayed when [Navi] on the Launch Bar is
touched. Touch [New Destination] to set a
destination.
ªRoute menuº (page 6-33)
Available destination setting methods:
Setting item Action
[Street Address] Searches for a destination by address.
ªFinding addressº (page 6-17)
[Nearby Points of Interest] Searches for points of interest near the current vehicle location, such as restaurants and gas stations,
etc.
ªFinding nearby placeº (page 6-18)
[Points of Interest] Searches for a destination from various categories of businesses or locations.
ªFinding points of interestº (page 6-19)
[Home] Searches for a route from the current location to the previously stored home location.
ªSetting home as destinationº (page 6-20)
[Address Book] Searches for a destination from Address Book.
ªSearching from address bookº (page 6-21)
[Previous Destinations] Searches for the destination from the previous destinations and a previous start point.
ªSearching from previous destinationsº (page 6-21)
[Connected Search] (if so equipped) Input a keyword of a point of interest and connect and search the NissanConnectedSMServices Data
Center.
ªSearching by connecting to the internetº (page 6-22)
[Intersection] Sets an intersection as a destination.
ªSetting intersectionº (page 6-22)
6. Navigation
&RQGLWLRQ
6-15


> (GLW    0RGHO 1&*1-1 @
6. Navigation
[Phone Number]Searches for a point of interest by a telephone number.ªSetting by phone numberº (page 6-23)
[City Center] Sets the center of a city as the destination.
ªSetting city centerº (page 6-23)
[Freeway Entrance/Exit] Sets a freeway entrance/exit as a destination.
ªSetting freeway entrance/exitº (page 6-23)
[Stored Routes] Sets a route from the stored route data.
ªSetting from stored routesº (page 6-24)
INFO:
. After setting a destination, the location of the
destination can be adjusted and the location
can be stored in the Address Book, etc.
ªOptions before starting the route
guidanceº (page 6-26)
. The destination can be deleted.
ªCanceling Routeº (page 6-36)
&RQGLWLRQ
6-16


> (GLW    0RGHO 1&*1-1 @
Specifying regionNCGNJN1402-120906-3E25FCC3-C8B2-44CB-BCC5-732F43DB2522With some destination setting methods, state/
province and city can be specified prior to
searching for destination locations.
5GB0417X
1. Touch [Navi] on the Launch Bar.
2. Touch the desired search method.
3. Touch [State/Province] or [City] if displayed.
4. Enter the name of the state, province or cityand then touch [List]. A list screen is
displayed.
5. Touch the preferred state, province or city from the list.
INFO:
. When the system is restarted, the state and
province in which the vehicle is recognized
by the GPS to be located will be set
automatically as a state and province for
location search.
. Touch [Change Area] to change the area for
conducting the location search (for U.S. and
Canada) .
. Touch [Current State] to search for the
destination within the state or province
where the vehicle is currently located.
. Touch [Space] to enter a space between
letters.
. After touching [City], touch [Last 5 Cities] to
display the last 5 cities set as destinations.
. In some cases, when a city name has been
entered, the number of matching destina-
tions in the ªMatchesº column may be
different from the number displayed on the
list screen. If this occurs, enter more
characters to further reduce the number of
matches.
. It is not possible to search for a route from
the continental United States, Canada or
Mexico to Hawaii, Virgin Islands, Puerto Rico, etc.
FINDING ADDRESSNCGNJN1402-120906-E974693C-B055-4844-9B8F-849E0623EC34Searches for a destination by address.
1. Touch [Navi] on the Launch Bar.
2. Touch [Street Address]. The street address
input screen is displayed.
5GB0420X
3. Input the street address.
.Touch [State/Province] to enter the stateor province name.
.Touch [House #] to enter the house
number. If the house number is not
available, touch [No House #].
.Touch [Street] to enter the street name. After finishing the entry, touch [List]. A list
of streets is displayed.
.Touch [City] to enter the city name. If thecity name is not available, touch [All
Cities].
6. Navigation
&RQGLWLRQ
6-17


> (GLW    0RGHO 1&*1-1 @
6. Navigation
4.Enter the state/province, house number,
street and city of the destination and then
touch [OK]. The route is displayed.
5. Touch [Start] to start route guidance.
Voice command
For U.S. and Canada
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to search for a
destination by address:
ªStreet Addressº*
*: This voice command operation is available only
when the language setting is in English.
FINDING NEARBY PLACENCGNJN1402-120906-00202A07-1B7D-457D-81B3-67E33550770CA facility located near the current vehicle location
can be set as the destination.
1. Touch [Navi] on the Launch Bar.
2. Touch [Nearby Points of Interest]. The
category list is displayed.
5GB0424X
3. Select [Emergency Services] for example.
4.Select preferred category from the sub
category list.
5GB0599X
5. Touch the preferred destination from the list.
The position of the selected location is
displayed in the preview on the touch screen
display.
INFO:
.If the suggested route is already set, by
touching [Show Along Route] on the
touch screen display, the system displays
only the facilities located along the route.
.A maximum of 100 facilities can bedisplayed on the list screen.
6. Touch [Start] to start route guidance.
INFO:
. Depending on the type of facility, a message
asking if you have checked the facility
availability may be displayed. Touch [Yes] or
[No] after reading the message.
. You can also set the destination by touching
[
] when scrolling the map and selecting
[Nearby POIs] from the menu.
. Nearby Points of Interest category list can be
customized from [Customize Nearby POIs].
ªNavigation settingsº (page 6-57)
&RQGLWLRQ
6-18


> (GLW    0RGHO 1&*1-1 @
Voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to set a nearby
place as a destination:
ªNearbyº
FINDING POINTS OF INTERESTNCGNJN1402-120906-E537C75F-F389-4D0C-BDC4-80E087FFBD4FThis allows you to find a facility by name or by
category. Specify the region and city of the
destination to find it more quickly.
NOTE:
Locations and business hours of facilities
are subject to change, which may not be
reflected in the map data. Double-check
this information before you go to an
emergency facility to ensure that you can
receive the proper support. Otherwise, you
may not receive emergency help when you
arrive at the destination.
A confirmation message also appears on
the navigation screen. Follow the displayed
instructions and check the items required.
Searching for a specific nameNCGNJN1402-120906-42622348-4B68-4A78-9240-986407C6723B1. Touch [Navi] on the Launch Bar.
2. Touch [Points of Interest].
3. Touch [Spell Name]. A character input
screen is displayed.
5GB0422X
INFO:
Touch [City] and touch [Last 5 Cities] to
display the last 5 cities recently set as
destinations.
4. Enter the name of the destination facility. After finishing the entry, touch [List]. A list
screen is displayed.
5. Touch the preferred destination facility from the list.
Sorting and filtering:
.[By Distance]:
Shows a list of facilities that are near the current vehicle location.
.[By Category]:
Display the list that summarizes the listed
names into categories. Select the cate-
gory to narrow down the search.
INFO:
.Touch [ i ] on the list screen to display thedetailed information about the POI that is
selected on the touch screen display.
.For U.S. and Canada:
To search for a POI with two or more
words, touch [Space] to enter a space
between each word.
.For Mexico:To search for a POI with two or more
words, touch [AND] between keywords.
6. A map of the selected place is displayed. Touch [Start] to start route guidance.
INFO:
. After setting a destination, the location of the
destination can be adjusted and the location
can be stored in the Stored Location, etc.
ªOptions before starting the route
guidanceº (page 6-26)
6. Navigation
&RQGLWLRQ
6-19


> (GLW    0RGHO 1&*1-1 @
6. Navigation
Voice command
For U.S. and Canada
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to search for
Points of Interest from a facility name:
ªPoints of Interest <POI Name>º*
*: This voice command operation is available only
when the language setting is set to English.
Searching Points of Interest by cate-
gory
NCGNJN1402-120906-351BE659-0AB9-473A-AC1A-38ABCADA93D61. Touch [Navi] on the Launch Bar.
2. Touch [Points of Interest]. The main category menu is displayed.
3. Touch the main category. The subcategory list is displayed.
4. Touch the subcategory. Narrow down con- dition screen is displayed.
5. Touch the narrow down category. Search conditions:
.[By Name]:Enter the name of the facility
.[Select a City]:Input the city to narrow down the target city.
.[Near Current Location]:
Facilities near the current vehicle location
are displayed in a list.
.[Near Destination]:When the destination is set, this indicates
a list of facilities around the destination.
5GB0423X
6. Touch the preferred destination facility from the list.
Touch [Start] to start route guidance.
INFO:
. Subcategories may not be displayed de-
pending on the selected main category.
. If there is no nearby POI, a message asking
whether to search from an extended area will
be displayed. When [Yes] is selected, the
system starts to search for POI in a wider area.
. Touch [ i ] on the list screen to display the
detailed information about the POI that is
selected on the touch screen display.
. Touch [By Distance] to sort the list by the
distance. Touch [New Category] to select a
different POI category.
Voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to search for
Points of Interest from category:
ªPOI Categoryº
SETTING HOME AS DESTINATIONNCGNJN1402-120906-EFD628DF-FD10-4DDD-BDF4-340E595F2B4EThe home location can be set as the destination
if the home location is stored in advance. This
function is especially useful when searching for a
route to return to the home location.
1. Touch [Navi] on the Launch Bar.
2. Touch [Home].
&RQGLWLRQ
6-20


> (GLW    0RGHO 1&*1-1 @
INFO:
If the home location is not stored yet, the
system will display a message asking if you
wish to store a home location. Touch [Yes] to
store the home location.
ªStoring home locationº (page 6-49)
3. An entire route to the destination is dis- played. Touch [Start] to start route guidance.
Voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to set home as
the destination:
ªGo Homeº
SEARCHING FROM ADDRESS
BOOK
NCGNJN1402-120906-4C7DF925-9404-4CBE-A2DD-E3DD6D9BAF0BLocations frequently visited can be stored in the
Address Book and reused to set destinations.
ªStoring locationº (page 6-49)
1. Touch [Navi] on the Launch Bar.
2. Touch [Address Book].
5GB0429X
3. Touch the preferred location from the list.
INFO:
.Selecting [Sort] displays a list of various sort functions.
Ð [Sorted By Number]: The Address Book entries are displayed
in ascending numerical order.
Ð [Sorted By Name]: The Address Book entries are displayed
in alphabetic order.
Ð [Sorted By Icon]: By selecting a particular icon, a list that
contains only the Address Book entries
associated with that icon is displayed.
Ð [Sorted By Group]: By selecting a particular group (family,
friends, leisure, etc.) , the selected group
is displayed at the top of the list.
.Touch [Add New] to add a new location.
4. The selected destination is displayed. Touch [Start] to start route guidance.
Voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to set a
destination from the Address Book:
ªAddress Bookº
SEARCHING FROM PREVIOUS
DESTINATIONS
NCGNJN1402-120906-CCA4B30F-6D42-498B-97B8-C74AE29C5414A previous destination and a previous start point
can be set as the destination.
Up to 100 previous destinations will be auto-
matically stored. If the number of previous
destinations exceeds 100, the oldest one is
automatically deleted and the new destination is
added.
1. Touch [Navi] on the Launch Bar.
2. Touch [Previous Destinations]. A list screen is displayed.
3. Touch the previous destination or a previous start point from the list.
6. Navigation
&RQGLWLRQ
6-21


> (GLW    0RGHO 1&*1-1 @
6. Navigation
4. Touch [Start] to start route guidance.
Voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice commands to display the
previous destinations/start point list:
ªPrevious Destinationsº
ªPrevious Start Pointº
SEARCHING BY CONNECTING TO
THE INTERNET (if so equipped)
NCGNJN1402-726DA97D-A533-42CE-BF37-EBEE35F369E0It is possible to find a point of interest by
inputting a keyword and connecting to the
Internet. The searched location can be set as a
destination.
1. Touch [Navi] on the Launch Bar.
2. Touch [Connected Search].
3. Enter the keyword and touch [Search]. The system will connect to the NissanConnect
SM
Services and the search results will be
displayed.
4. Touch the preferred destination from the list.
5. The entire destination is displayed. Touch [Start] to start route guidance.
INFO:
Connected Search is a NissanConnect
SMSer-
vices feature. It is necessary to subscribe to
NissanConnect
SMServices in order to use the
feature.
SETTING INTERSECTIONNCGNJN1402-120906-4599645B-7FEB-4FFC-9904-951F14B57AFCIt is possible to set an intersection of any two
streets as the destination and have the system
calculate a route.
1. Touch [Navi] on the Launch Bar.
2. Touch [Intersection]. Intersection screen is displayed.
5GB0484X
3. Input the Intersection.
.Touch [State/Province] to enter the state
or province name if necessary.
.Touch [City] to enter the city name.
.Touch [1st Street] to enter the first streetname. After finishing the entry, touch [List]. A list screen is displayed.
.After first street information is entered,
touch [2nd Street] to enter the second
street name. After finishing the entry,
touch [List]. A list screen is displayed.
4. Enter the state/province, city, and street of the destination and then touch [OK]. The
route is displayed.
5. The selected destination is displayed at the center of the map. Touch [Start] to start route
guidance.
Voice command
For U.S. and Canada
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to set an
intersection as destination:
ªIntersectionº*
*: This voice command operation is available only
when the language setting is set to English.
&RQGLWLRQ
6-22


> (GLW    0RGHO 1&*1-1 @
SETTING BY PHONE NUMBERNCGNJN1402-120906-87C28043-E7CD-4FB6-9E27-0811FF88248EIf the phone number of a facility is known, it is
possible to search for a facility by entering the
phone number.
INFO:
. If the area code of the specified telephone
number does not exist in the map data, the
system cannot search for the location.
. Only the locations included in the database
in the map data can be searched for by
phone number. Residential phone numbers
cannot be used to search for a location.
1. Touch [Navi] on the Launch Bar.
2. Touch [Phone Number]. The telephone
number input screen is displayed.
3. Enter the telephone number including the area code. After finishing entry, touch [OK].
4. The selected destination is displayed. Touch [Start] after confirming the location of the
displayed destination.
INFO:
If there are more than one location registered for
the phone number, a list screen is displayed.
Touch an item on the list to select a preferred
location.
SETTING CITY CENTERNCGNJN1402-120906-1CBCD129-BFBE-47D9-9EF0-BE9DCF8E2B24It is possible to set the center of a specified city
as a destination.
1. Touch [Navi] on the Launch Bar.
2. Touch [City Center]. A character input
screen is displayed.
3. Enter the name of the city and touch [List]. A list screen is displayed.
INFO:
Touch [Last 5 Cities] to display the last 5
cities recently set as destinations.
4. Touch the preferred destination from the list.
INFO:
Touch [By Distance] to sort the list by the
nearest distance. Touch [By Name] to sort
the list by the alphabetic order.
5. The selected destination is displayed on the map. Touch [Start] after confirming the
location of the displayed destination.
Voice command
For U.S. and Canada
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Use the following voice command to set city
center as a destination:
ªCity Centerº*
*: This voice command operation is available only
when the language setting is in English.
SETTING FREEWAY ENTRANCE/
EXIT
NCGNJN1402-120906-4515EF2C-9776-443B-97E6-E670C645B162It is possible to set the destination to an entrance
or exit of a freeway.
1. Touch [Navi] on the Launch Bar.
2. Touch [Freeway Entrance/Exit] to display the keyboard input screen.
3. Enter the name of the freeway. After finishing entry, touch [List].
4. Touch the preferred freeway.
6. Navigation
&RQGLWLRQ
6-23


> (GLW    0RGHO 1&*1-1 @
6. Navigation
5GB0428X
5. Touch [Entrance] or [Exit]. A list screen isdisplayed.
6. Touch the preferred destination from the list. The selected location is displayed in the
preview on the touch screen display.
INFO:
Touch [By Distance] to sort the list by the
nearest distance.
7. Touch [Start] to start route guidance.
SETTING FROM STORED ROUTESNCGNJN1402-120906-174315DE-CFE8-4311-94E7-67FE9F3D0C92It is possible to select a preferred route from the
stored routes.
1. Touch [Navi] on the Launch Bar.
2. Touch [Stored Routes]. A list screen is
displayed.
3. Touch the preferred route from the list.
5GB0430X
4. The entire route is shown on the map. Touch [Start] to start route guidance.
INFO:
. The stored route only includes locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
stored.
. To store the current route, touch [Store
Current Route]. A route can be stored only
when it includes one or more waypoints.
ªStoring routeº (page 6-50)
SETTING POINT ON MAPNCGNJN1402-120906-1CECA297-8DF7-4E58-9746-C408EB3A9FBDIt is possible to set a location scrolled to on the
map as the destination and have the system
calculate a route.
5GB0432X
1. Scroll the map, place the cross pointer over
the preferred location, and touch [
].
INFO:
The point on the blinking road where the
center of the cross pointer is located can be
set as a destination.
2. Touch [New Destination].
3. The entire route is shown on the touch screen display. Touch [Start] to start route
guidance.
&RQGLWLRQ
6-24