NISSAN PATHFINDER 2007 R51 / 3.G Navigation Manual

NAV3085
2. Enter the name of the city, highlight [OK] and
push<ENTER>.
A list screen is displayed.
INFO:
.Highlight [All Cities] and push
<ENTER>to include all cities in the
region as the route calculation condition.
.Highlight [Last 5 Cities] and push
<ENTER>to display 5 cities recently
set as destinations.
NAV2858
3. Highlight the city of the destination from the
list and push<ENTER>.
A character input screen is displayed.
Setting a destination4-19

SETTING FROM MAP
This allows you to search for a destination by
scrolling the map, and then have the system
calculate a route to the destination.
NAV2859
1. Scroll the map, place the cross pointer over
the preferred location, and push<ENTER>.
INFO:
.Adjust the map scale to search for a
location more effectively.
.The point on the blinking road where the
center of the cross pointer is located
can be set as a destination.
NAV2860
2. Highlight [New Dest] and push<ENTER>.
INFO:
For the items except for [New Dest], refer to
“Map menu screen”.
“Scrolled location map screen”
(page 2-12)
4-20Setting a destination

NAV2861
3. The system sets the destination to the
selected location and starts calculating a
route.
NAV2862
INFO:
If you set the destination on a freeway, a
confirmation message is displayed.
Setting a destination4-21

The following setting methods are available
when setting the destination to your home or
any location stored in the Address Book.
.Setting your home
This allows you to set your home as the
destination and have the system calculate a
route. It is useful especially when you are
searching for a route to return to your home.
“STORING A LOCATION” (page 6-2)
.Setting from Address Book
This allows you to set the destination to a
location stored in the Address Book and
have the system calculate a route. To utilize
this function more effectively, destinations
that you often travel to should be stored in
advance.
“STORING A LOCATION” (page 6-2)
.Setting a Previous Destination
This allows you to set the destination to a
location that you have previously set as the
destination and have the system calculate a
route. Up to 100 previous destinations will
be automatically stored.
If the number of previous destinations
exceeds 100, the oldest one will be
replaced by the new one..Setting the Previous Starting Point
This allows you to set the destination to the
starting point of the previous route guidance
and have the system calculate a route.
.Setting from Stored Routes
You can select a preferred route from the
stored routes.
SETTING A STORED LOCATION AS
THE DESTINATION
4-22Setting a destination

NAV2774
SETTING YOUR HOME
1. Highlight [Address Book] and push
<ENTER>.
NAV2775
2. Highlight [Home Location] and push
<ENTER>.
INFO:
If you have not stored your home yet, the
system will automatically display a screen for
storing it.
“STORING A LOCATION” (page 6-2)
NAV2776
3. A confirmation message is displayed, and
the system sets your home as the destina-
tion.
Setting a destination4-23

NAV2777
4. Your home is displayed at the center of the
map, and the system starts calculating a
route.
4-24Setting a destination

NAV2774
SETTING FROM ADDRESS BOOK
1. Highlight [Address Book] and push
<ENTER>.
A list screen is displayed.
NAV2778
2. Highlight the preferred location from the list
and push<ENTER>.
NAV2779
INFO:
Selecting [Sort List] displays a list of various
sort functions.
To use the sort functions, stored locations
must be set in advance.
“EDITING THE STORED HOME AND
LOCATION” (page 6-16)
Setting a destination4-25

NAV2780
&1Sort by number:
The Address Book entries are displayed
in ascending numerical order.
&2Sort by name:
The Address Book entries are displayed
in alphabetic order.
&3Sort by icon:
By selecting a particular icon, a list that
contains only the Address Book entries
associated with that icon is displayed.
&4Sort by group:
By selecting a particular group (family,
friends, leisure, etc.) , the selected group
is displayed at the top of the list.
NAV2781
3. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push<ENTER>.
The system sets the destination to the
selected location and starts calculating a
route.
4-26Setting a destination

NAV2782
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
Setting a destination4-27

NAV2783
SETTING A PREVIOUS DESTINATION
1. Highlight [Previous Destinations] and push
<ENTER>.
NAV2784
2. Highlight the preferred destination from the
list and push<ENTER>.
NAV2785
3. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push<ENTER>.
The system sets the destination to the
selected location and starts calculating a
route.
4-28Setting a destination