light NISSAN PATHFINDER 2008 R51 / 3.G 06IT Navigation Manual

Black plate (25,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. A confirmation message is displayed. High-
light [Yes] and push<ENTER>.
INFO:
If a route is cancelled, [Cancel Route] changes
to [Resume Route].
Highlight [Resume Route] and push<ENTER>
to reactivate the cancelled route.
This is available only until a new route is set.
HOW TO VIEW MAP SCREEN
The navigation system displays various informa-
tion on the map screen.
Screen information
&1Vehicle icon:
Indicates the current vehicle location and
the direction that you are traveling.
&2Starting point:
Displays the vehicle location, with which the
route is set, as the starting point.
&3Guide point:
Indicates a guide point on the route.
OPERATING MAPS
Getting started2-17

Black plate (26,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
&4Waypoint:
Displays the locations that you travel past
when going to the destination. A maximum
of 5 waypoints can be set.
&5Destination:
Indicates the destination location of the
route guidance.
When the map scale is 300 ft or less in Plan
View, or 1/4 mile or less in Birdview: The
name is displayed on the map screen.
&6Suggested route:
Appears in bold yellow during route gui-
dance.
&7Map Menu icon:
Touch the icon to display the Map Menu
screen.
“MAP MENU SCREEN” (page 2-11)
&8/Direction indicator:
Indicates the direction of the map.
Touch the icon to switch the direction of the
map.
“SETTINGS OF HEADING/LONG
RANGE MAP VIEW” (page 3-14)
&9Scale indicator:
Indicates the scale of the map.
Touch the icon to display the scale bar. This
allows the map scale to be adjusted.
“OPERATING WITH THE TOUCH OP-
ERATION” (page 3-10)
&10Street name:
Displays the name of the street that you are
currently driving on.
TURNING VOICE GUIDANCE ON/OFF
You can activate or deactivate voice guidance
and adjust the volume.
1. Push<ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
SETTING THE VOICE GUIDANCE
2-18Getting started

Black plate (27,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Highlight [Guidance Voice] and push
<ENTER>. The indicator illuminates if voice
guidance is activated.
Other settings
You can also activate or deactivate voice
guidance using the following procedure.
1) Push<SETTING>.
2) Highlight [Volume and Beeps] and push
<ENTER>.
3) Highlight [Guidance Voice] and push<ENTER>.
ADJUSTING VOICE GUIDANCE VO-
LUME
You can adjust the volume of voice guidance.
1. Push<SETTING>.
2. Highlight [Volume and Beeps] and push
<ENTER>.
3. Highlight [Guidance Vol.] and push
<ENTER>.
4. Adjust the voice guidance volume by using
the center dial or main directional buttons.
Getting started2-19

Black plate (28,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
You can also adjust the volume by turning the
audio system volume knob or tilting<VOL>on
the steering switch while voice guidance is
being announced.
CHARACTER (letter and number) INPUT
SCREEN
You will have to enter alphanumeric characters
when setting a destination, searching for a
facility or editing the stored locations, etc.
1. Use the touch panel, center dial, main
directional buttons or additional directional
buttons to highlight a character on the
displayed keyboard.
2. Push<ENTER>. The highlighted character
is entered.
3. Push<BACK>, or highlight [Delete] and
push<ENTER>to delete the last character
entered.
Push and hold<BACK>to delete all the
characters entered.
Highlight [Space] and push<ENTER>to
enter a space.
4. After finishing the entry, highlight [List] and
push<ENTER>.
HOW TO INPUT LETTERS AND
NUMBERS
2-20Getting started

Black plate (29,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
.You can push<BACK>on the control
panel to return to the previous screen,
but only after deleting all the characters
entered.
.When you touch [BACK] on the screen,
the screen returns to the previous
screen even when characters have been
entered.
.When the character that you have
entered can only be followed by one
other character, that character is en-
tered automatically.
.When you have entered text and nar-
rowed down the matching list items to a
number that will fit on the screen, the list
screen appears automatically.
.Symbol keys are displayed by high-
lighting [Symbols] and pushing
<ENTER>. Alphabet keys are displayed
by highlighting [A-Z] and pushing
<ENTER>.
Symbol input screen
PHONE NUMBER INPUT SCREEN
You can enter a phone number as a search
method to look for a point of interest.
INFO:
Only the locations included in the database in
the map data can be searched by the phone
number.
1. Use the touch panel, center dial, main
directional buttons or additional directional
buttons to highlight a number on the
displayed keyboard.
2. Push<ENTER>. The highlighted number is
entered.
Getting started2-21

Black plate (30,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Push<BACK>, or highlight [Delete] and
push<ENTER>to delete the last number
entered.
Push and hold<BACK>to delete all the
numbers entered.
4. After finishing the entry, highlight [Map] and
push<ENTER>.
INFO:
.You can push<BACK>on the control
panel to return to the previous screen, but
only after deleting all the numbers entered.
.When you touch [BACK] on the screen, the
screen returns to the previous screen even
when numbers have been entered.NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, such as the
display, audio, climate control and phone.
INFO:
For the voice commands for the audio, air
conditioner and other systems (except naviga-
tion system) , refer to the vehicle Owner’s
Manual.
CONFIRMING VOICE COMMANDS
If you are controlling the system by voice
commands for the first time or do not know the
appropriate voice command, confirm the voice
command lists.
The following information describes how to
display the navigation command list and the
help list. For information about the operations of
other functions, refer to the vehicle Owner’s
Manual.
NISSAN VOICE RECOGNITION
2-22Getting started

Black plate (31,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Example: Displaying the navigation command list
1. Push<INFO>.
2. Highlight [Others] and push<ENTER>.
3. Highlight [Voice Recognition] and push
<ENTER>.
4. Highlight [Command List] and push
<ENTER>.
5. Highlight [Navigation] and push<ENTER>.
6. Highlight the preferred item and push
<ENTER>.
Available items:
.Destination:
Allows you to set a destination.
.Search:
Allows you to search for a location.
.Map:
Allows you to change the map settings.
.Route:
Allows you to set a route in detail.
.Others:
Allows you to store locations or set the
route guidance.
7. You can confirm the list by scrolling the
screen using the up and down switches of
the main directional buttons or the center
dial.
8. Press<BACK>to return to the previous
screen.
For further details about the displayed command
list, refer to section 9.
“Command List” (page 9-3)
BEFORE STARTING
To get the best recognition performance out of
NISSAN Voice Recognition, observe the follow-
ing:
.The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.) , which may prevent
the system from correctly recognizing the
voice commands.
Getting started2-23

Black plate (49,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
2. Highlight [Map Settings] and push
<ENTER>.
3. Highlight [Change View] and push the right
button of the directional buttons.
4. Highlight the preferred map view and push
<ENTER>. The indicator of the selected
map view illuminates.
5. Push<MAP>or touch [Back to Map] to
return to the current location map screen.
Available views
.Plan View:
Switches to Plan View.
.Birdview
TM:
Switches to BirdviewTM.
.Split (Plan View):
Changes to the split screen mode and both
halves display maps in Plan View.
.Split (Birdview
TM):
Changes to the split screen mode and the
left half displays the map in Plan View and
the right half displays the map in Birdview
TM.
INFO:
.When you select [Split (Plan View)] or [Split
(Birdview
TM)], [Left Settings] and [Right
Settings] become available. This is used to
operate the left/right screen.
“OPERATION WITH SPLIT SCREEN
DISPLAY” (page 3-18)
.If [Split (Plan View)] or [Split (Birdview
TM)] is
selected, the normal map scrolling and scale
adjustment are set in the right screen.
However, if you touch an icon before
adjusting the map direction or scale, then
each screen can be adjusted independently.
Split (Plan View)
Split (BirdviewTM)
Map settings3-13

Black plate (50,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Other settings
You can also set the map view using the
following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Map Settings] and push
<ENTER>.
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
.To display a map in Plan View:
“Planview map”.To display a map in Birdview
TM:
“Birdview map”
.To display a split map in Plan View:
“Planview Split Map”
.To display a split map in Birdview
TM:
“Birdview Split Map”
SETTINGS OF HEADING/LONG
RANGE MAP VIEW
You can change the map direction (orientation)
in Plan View or change the position of the
vehicle icon to view a wider area in the traveling
direction.
These settings are available only in the Plan
View or Split (Plan View) mode.
1. Push<ENTER>while the current location
map screen is displayed.
2. Highlight [Map Settings] and push
<ENTER>.
3. Highlight [Settings] and push<ENTER>.
3-14Map settings

Black plate (51,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
4. Highlight the preferred map orientation and
push<ENTER>. The indicator of the
selected map orientation illuminates.
5. Push<MAP>to return to the current
location map screen.
Available map orientations
.North Up:
North is set at the top of the map.
.Heading Up:
The traveling direction is set at the top of the
map.
.Long Range Map View:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
.Map Scale:
A scale appears on the left side of the
screen. This changes the scale of a map..Birdview
TMAngle:
This changes the BirdviewTMangle.
INFO:
.[Long Range] is displayed only when you
select [Heading Up].
.[Birdview Angle] is displayed only when the
map view is set to the Birdview or Split
(Birdview) mode.
North Up
Heading Up
Long Range Map View
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.
: North Up
: Heading Up
Map settings3-15