display NISSAN PATHFINDER 2017 R52 / 4.G 08IT Navigation Manual

Black plate (167,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
Settings keyboard layout of character
input screen
GUID-13AB4AEC-55B3-4A22-AB4F-9940A64DBE58Depending on the user’s preference for the
keyboard layout of character input screen, the
ABC layout or QWERTY layout can be selected.
Example: Switching to the QWERTY layout
NSE00211. Highlight [Others] and push<ENTER>.
2. Highlight [Keyboard Type] and push
<ENTER>.
NSE00223. Highlight [QWERTY] and push <ENTER>.
The indicator illuminates when the item is set.
4. Push <MAP> to return to the current
location map screen.
NSE0023ABC layout
NSE0024QWERTY layout
Adjusting current vehicle locationGUID-BA287DE2-DD2E-4CE7-B8C2-A89C2D07A2EEIf the vehicle icon indicating the current vehicle
location is not in the correct position, the
location of the vehicle icon on the map screen
can be adjusted.
INFO:
. Regardless of the map view setting, the map
is displayed in Plan View when adjusting the
position of the vehicle icon.
. When correcting the position of the vehicle
icon, the map is automatically displayed in
the North Up mode. After finishing the
correction, the map restores the current
orientation setting.
. The position and direction of the vehicle icon
may be misaligned depending on the
external conditions and environment.
. If the vehicle icon is misaligned, drive for a
while in a location where the GPS signals
can be received. This may correct the
position of the vehicle icon.
NSE00251. Highlight [Others] and push <ENTER>.
Other settings8-9

Black plate (168,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
8-10Other settings
2.Highlight [Adjust Current Location] and
push <ENTER>. The current location map
screen is displayed.
NSE00263. Adjust the position of the vehicle icon.
After adjusting the position of the vehicle
icon, push <ENTER>.
NSE00274. Adjust the direction of the vehicle icon.
After adjusting the direction of the vehicle
icon, push <ENTER>.
NSE00285. A message is displayed, and the adjusted
vehicle location is stored.
DELETE STORED ITEMSGUID-03FFF156-F2DB-4325-A9D3-66B68B30250EDelete stored item from setting screen.
NSE0029
Basic operationGUID-D6453CB9-19C0-4C91-9852-8FC0829BBFC41. Highlight [Navigation] and push <ENTER>.
2. Highlight the preferred item that you want to delete and push <ENTER>.
Available itemsGUID-DFE1C332-90CA-4CE5-A709-3A1B4418EC3E.[Deletes Stored Information]:
Delete the stored location and home.
. [Delete All Previous Destinations]:
Delete all previous destinations.
. [Delete Previous Start Point]:
Delete all previous start point.
RESET ALL NAVIGATION SETTINGS
TO DEFAULT
GUID-66C649DE-B505-42B5-9043-D19851628E9AThis restores various settings (display, volume
level, etc.) to the default settings.
INFO:
The memory contents, such as the stored
locations, will not be deleted.
NSE00301. Highlight [Navigation] and push <ENTER>.

Black plate (169,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2. Highlight [Reset All Navigation Settings toDefault] and push <ENTER>.
NSE00313. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
GUID-D00AB857-D296-4374-A005-8013A4B67B71This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume) , the voice guide function and the beep
function.
BASIC OPERATIONGUID-7ED08D2C-19B2-4688-8D21-00F4BAB9AF8C
NSE00321. Push<SETTING>.
2. Highlight [Volume & Beeps] and push
<ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
4. Use the multi-function controller to adjust the volume. Push <ENTER>to set to on or
off.
5. After setting, push <ENTER>or<BACK>
to apply the setting.
6. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Setting itemsGUID-F14351CD-F8CF-43F8-9F9B-FD2C656973FA. [Audio Volume]:
Adjust the volume level of the audio system
by pushing the main directional buttons or
rotating the center dial in the direction of [+]
or [−].
. [Guidance Volume]:
Adjust the volume level of voice guidance by
pushing the main directional buttons or
rotating the center dial in the direction of
[+] or [−].
. [Ringtone]:
Adjust the volume level of the ringtone by
pushing the main directional buttons or
rotating the center dial in the direction of
[+] or [−].
. [Incoming Call]:
Adjust the incoming call volume by pushing
the main directional buttons or rotating the
center dial in the direction of [+] or [−].
. [Outgoing Call]:
Adjust the outgoing call volume by pushing
the main directional buttons or rotating the
center dial in the direction of [+] or [−].
. [Switch Beeps]:
Select to toggle the beep function between
on and off. The indicator light illuminates
Other settings8-11
VOLUME ADJUSTMENT

Black plate (170,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
8-12Other settings
when the beep function is set to on. The
beep sounds when pushing and holding a
button or when a prohibited operation is
performed.
. [Guidance Voice]:
Select to toggle the voice guidance function
between on and off. The indicator light
illuminates when the voice guidance func-
tion is set to on.
INFO:
For more details about [Ringtone], [Incoming
Call] and [Outgoing Call], refer to the vehicle
Owner’s Manual.
GUID-5B5C2F44-4992-4668-BF1B-EDBD2949FB2EThis changes the clock settings.
BASIC OPERATIONGUID-13F08E0C-578A-43ED-97D6-DCBE5AB74C41
NSE00331. Push <SETTING>.
2. Highlight [Clock] and push <ENTER>.
3. Highlight the preferred adjustment item and push <ENTER>.
4. Use the multi-function controller to adjust to the preferred setting. Push <ENTER>to
set on or off.
5. After setting, push <ENTER>or<BACK>
to apply the setting.
6. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Setting itemsGUID-BEE93686-390C-4983-BF8B-6A84BEE885EA. [On-screen Clock]:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates when the clock display is set to on.
. [Clock Format (24h)]:
Select the clock format between 12-hour
and 24-hour times. The indicator light
illuminates when the clock is set to the 24-
hour format.
. [Offset (hour)]:
Use the main directional buttons or the
center dial to adjust the offset value
(between −12 and +12).
. [Offset (min)]:
Use the main directional buttons or the
center dial to adjust the offset value
(between −59 and +59).
. [Daylight Savings Time]:
Select to toggle the daylight savings time
setting between on and off. The indicator
light illuminates when the daylight savings
time setting is set to on.
. [Time Zone]:
Select an appropriate time zone from the list
that appears when this item is highlighted.
— Pacific
— Mountain
— Central
CLOCK SETTINGS

Black plate (175,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9 Voice recognition
NISSAN voice recognition...
...................................................... 9-2
Standard mode ...
........................................................................\
.. 9-3
Confirming how to use voice commands ...
..................... 9-3
Using the system ...
................................................................. 9-4
Before starting ...
..................................................................... 9-4
Giving voice commands ...
.................................................... 9-5
Voice command examples ...
................................................ 9-8
Alternate command mode ...
.................................................... 9-12
Displaying how to operate Voice
Recognition System ...
........................................................ 9-12 Confirming how to use voice commands
...
................ 9-17
Using the system ...
........................................................... 9-19
Before starting ...
................................................................ 9-19
Giving voice commands ...
............................................... 9-19
System feedback announcement modes ...
................. 9-20
Setting alternate command mode ...
............................. 9-21
Speaker adaptation ...
....................................................... 9-21
Voice command examples ...
........................................... 9-23

Black plate (176,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-2Voice recognition
GUID-17D4DE16-8733-494D-9B1C-E8BF4EEC3C18NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, in one of two
modes, Standard Mode or Alternate Command
Mode. Standard Mode allows the operation of
Navigation, Phone, Audio, Information and Help.
The commands that are available are always
shown on the display and announced by the
system. To perform operations, simply follow the
prompts given by the system. In Standard Mode,
hands-free operation of Change map view,
Route selection and Bluetooth Audio, etc. is
not available through Voice Recognition.
Alternate Command Mode allows advanced
operations. When this mode is active, an
expanded list of commands can be spoken after
pushing<TALK
>, and the voice command
menu prompts are turned off. Note that in this
mode the recognition success rate may be
affected because the number of available
commands and ways of speaking each com-
mand are increased. Otherwise, it is recom-
mended that Alternate Command Mode be
turned OFF and Standard Mode be used for
the best recognition performance.
“Alternate command mode” (page 9-12)
INFO:
. To improve recognition success when Alter-
nate Command Mode is active, try using the
Speaker Adaptation function available in that
mode.
“Speaker adaptation” (page 9-21)
Otherwise, it is recommended that Alternate
Command Mode be turned OFF and Stan-
dard Mode be used for the best recognition
performance.
. For the voice commands for the audio,
phone and other systems, refer to the
vehicle Owner’s Manual. The following sec-
tions refer only to the navigation, phone and
information systems.
. The voice recognition system cannot be
operated when the soft top is not closed (for
Roadster and CrossCabriolet models).
NISSAN VOICE RECOGNITION

Black plate (177,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GUID-1A7F9479-B441-4CC0-A44F-C5FB692BEF7A
CONFIRMING HOW TO USE VOICE
COMMANDS
GUID-2592E3C0-BDF8-4551-9FAC-29594FB61C40When operating the voice recognition system
for the first time or if help is preferred to use the
system, the User Guide can be displayed.
It is possible to confirm how to use voice
commands by accessing a simplified User
Guide, which contains basic instructions and
tutorials for several voice commands.
NVR0001
Basic operationGUID-6488BAB7-0650-4B8A-87AE-FB7FA85884821. Push<INFO>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Voice Recognition] and push
<ENTER>.
4. Highlight [User Guide] and push
<ENTER>.
5. Highlight the preferred item and push
<ENTER>. Available items:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E.
[Getting Started]:
Describes the basics of how to operate the
voice recognition system.
. [Let’s Practice]:
Mode for practice following the system
voice.
. [Using the Address Book]:
Tutorial for entering a destination by the
Address Book.
. [Finding a Street Address]:
Tutorial for entering a destination by street
address.
. [Placing Calls]:
Tutorial for making a phone call by voice
command operation. Refer to the vehicle
Owner’s Manual for details.
. [Help on Speaking]:
Displays useful tips regarding speaking for
correct command recognition by the system.
INFO:
The Command List feature is only available when
Alternate Command Mode is active.
Getting StartedGUID-87426078-1A0F-4B63-9DFE-30E56773B915Before using the voice recognition system for
the first time, it is possible to confirm how to use
commands by viewing the Getting Started
section of the User Guide.
NVR00021. Highlight [Getting Started] and push
<ENTER>.
2. To confirm the page, scroll the screen using the multi-function controller.
Practicing voice commandsGUID-CDEFBC9E-A1CC-478F-A48F-9F01B52AD538Practice for using the voice recognition function
can be performed by repeating a phone number
after the system announces it.
Voice recognition9-3
STANDARD MODE

Black plate (178,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-4Voice recognition
NVR00031.Highlight [Let’s Practice] and push
<ENTER>.
2. Practice voice commands in accordance with the audio guidance.
Tutorials on operation of voice recogni-
tion system
GUID-B7CC887A-EB99-4A0B-8C6C-BD19444CEC9AWhen highlighting [Using the Address Book],
[Finding a Street Address] or [Placing Calls] and
pushing <ENTER>, the system displays tutor-
ials on how to perform these operations using
voice recognition.
NVR0005
Useful tips for correct operationGUID-58A85E03-D1F9-4B77-B975-5A82D474CBB2It is possible to display useful speaking informa-
tion that may help the system to accept a voice
command correctly.
NVR00041. Highlight [Help on Speaking] and push
<ENTER>.
2. To confirm the page, scroll the screen using the multi-function controller.
USING THE SYSTEMGUID-539E8D5B-D33E-46A0-A939-82AE1E29FA3E
InitializationGUID-208AFEF9-6EB5-4D28-BBE9-0944D897E172When the ignition switch is pushed to the ON
position, Voice Recognition is initialized, which
may take up to one minute. When completed,
the system is ready to accept voice commands.
If<TALK
> is pushed before the initialization
completes, the display will show the message:
“System not ready”.
BEFORE STARTINGGUID-48663A8B-A5B2-4BAC-A9AD-A83F8B2ADE4CTo get the best recognition performance from
Voice Recognition, observe the following items.
. The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.
. Wait until the tone sounds before speaking a
command.
. Speak in a natural conversational voice
without pausing between words.
. If the air conditioner is set to “Auto”, the fan
speed is automatically lowered so that voice
commands can be recognized more easily.

Black plate (179,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GIVING VOICE COMMANDSGUID-D46E52BA-684D-4DAB-B605-1A96C8D32A151. Push<TALK>located on the steering
wheel switch.
NVR00062. A list of commands appears on the screen, and the system provides the voice menu
prompt “Would you like to access Phone,
Navigation, Information, Audio or Help?”.
3. After the tone sounds and the icon on the screen changes from [
] to [], speak a
command.
4. Continue to follow the voice menu prompts and speak after the tone sounds until the
preferred operation is completed.
Operating tipsGUID-4DC2C75C-9D70-45C4-B334-1290C6FC2DBB.Speak a command after the tone.
. Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted. Follow the prompts given by the system.
. If the command is not accepted, the system
announces, “Please say again”. Repeat the
command in a clear voice.
. Push <BACK> once to return to the
previous screen.
. To cancel the command, push and hold
<TALK
>. The message, “Voice can-
celed” will be announced.
. Push <TALK
>to stop the voice prompt
and give the command at once. Remember
to wait for the tone before speaking.
. To adjust the volume of the system feed-
back, push the volume control buttons <+>
or <−> on the steering wheel switch or use
the audio system volume control knob while
the system is making an announcement.
How to speak numbersGUID-01530F6C-D312-4B81-9BB4-B74F714C9EE7NISSAN Voice Recognition requires a certain
way to speak numbers when giving voice
commands. Refer to the following examples.
General rule:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0EOnly single digits 0 (zero) to 9 can be used. (For
example, if speaking 500, “five zero zero” can be
used, but “five hundred” cannot. Examples:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E1-800-662-6200
“One eight zero zero six six two six two zero
zero”
Improving Recognition of Phone numbers:
Recognition of phone numbers can be improved
by saying the phone number in 3 groups of
numbers. For example, to call 800-662-6200,
say “Eight Zero Zero” first, and the system will
then ask to speak the next three digits. Then, say
“Six Six Two”. After recognition, the system will
then ask to speak the last 4 digits. Say, “Six Two
Zero Zero”. Using this method of phone digit
entry can improve recognition performance.
INFO:
For best recognition, speak “zero” for the
number “0” and “oh” for the letter “o”.
Voice recognition9-5

Black plate (180,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
9-6Voice recognition
Command ListGUID-50EA80A6-5D6D-4DD5-B5C1-2D09315AC7AB
Category Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Navigation Operates Navigation function.
Phone Operates Phone function.
Information Displays vehicle Information function.
Audio Operates Audio function.
Help Displays User Guide.
Navigation Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
CommandAction
Destination Home Sets a route to the home that is stored in the Address Book.
Address Searches for a location by the street address specified, and sets a route (for continental U.S. only).
Places Sets a route to a facility near the current vehicle location.
Address Book Searches for stored information in the Address Book.
Previous Destinations Sets a route to a previous destination.
Information Command:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
Command Action
Fuel Economy Displays fuel economy information.
Trip Computer (if so equipped) Displays trip information.
Maintenance Displays maintenance information.
Traffic Information Displays the [Info On Route] screen when a route to the destination is set.
Displays the [Nearby Traffic Info.] screen when a route to the destination is not set.
Where am I? Displays the current location.