reverse NISSAN PULSAR 2014 Owners Manual


> (GLW   0RGHO &$@
CAUTION:
Do not operate theheadlight cleanerifthe
window washerfluidreservoir isempty.
REAR WINDOW WIPERANDWASHER
SWIT CH
GUID-E7 73AFD4-0F AA-459C-9 091-469FDC8 45ADF
SIC4025
T ype A
SIC4076
T ype B
The rear window wiperandwasher operate whenthe
ignition switchisin the ªONº position.
Wiper operation
GUID-C97A7 DA0-2523-47 7D-9205-06A74AA5A444
T urn theswitch fromtheªOFFº position tooperate the
wiper.
*
1
ªINTº orª
º (intermittent) Ðintermittent
operation (notadjustable)
*
2
ªONº orª
º (low) Ðcontinuous lowspeed
operation
Reverse synchronization function(ifequipped) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When thewindshield wiperswitch ison, moving the
shift lever tothe ªRº (Reverse) positionwilloperate the
rear window wiper.
W asher operation
GUID-C36AB 7EE-E16C-4AA6-9AA4 -4AE4CE95F5E8
Push theswitch forward
*
3
to operate thewasher.
Then thewiper willalso operate severaltimes.
GUID-90 3DF46F-C343 -47BC-B18A-DBDB39AB A97A
JVI0283X
T ype A*
SIC4519
T ype B
*: The illustration isfor the Left-Hand Drive(LHD)
model. FortheRight-Hand Drive(RHD) model, the
layout willbethe opposite.
The defogger switchoperates whentheignition switch
is in the ªONº position.
The defogger isused toreduce themoisture, fogor
frost onthe rear window surfacetoimprove therear
view .
When thedefogger switch
*
1
is pushed, theindicator
light
*
2
illuminates andtherear window defogger
operates forapproximately 15minutes. Afterthepreset
time haspassed, thedefogger willturn offautomati-
Instrume ntsand controls
2-21
DEFOGGER
SWITCH
&RQGLWLRQ


> (GLW   0RGHO &$@
Locking passengers' windows:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When thelock button
*
A
is pushed in,the
passengers' windowscannotbeoperated.
T o cancel thepassengers' windowslock,push thelock
button
*
A
again torelease thepassengers' window
lock.
Passenger's windowswitch
GUID-94 45E300-8AEF -4C87-B23A-82D B696E7584
SIC4523
The passenger's switchcancontrol itscorresponding
window .
When thepassengers' windowslockbutton onthe
driver's switchispushed in,the passenger's switch
cannot beoperated.
Automatic function
GUID-9B 742A93-33F3 -4843-852E-7713CEAD D5D1
SIC4524
The automatic functionisavailable forthe switch that
has an
mark onitssurface.
The automatic functionenablesawindow tofully open
or close without holding theswitch downorup.
T o fully open thewindow ,push thepower window
switch downtothe second detentandrelease the
switch. To fully close thewindow ,pull thepower
window switchuptothe second detentandrelease
the switch. Theswitch doesnothave tobe held during
window operation.
T o stop thewindow open/close operationduringthe
automatic function,pushdown orpull upthe switch in
opposite directions.
Auto-reverse function:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
WARNING:
There isasmall distance justbefore theclosed
position whichcannot bedetected. Makesure
that allpassengers havetheirhands, etc.inside
the vehicle beforeclosing thewindows.
The auto-reverse functionenablesawindow to
automatically reversewhensomething iscaught inthe
window asitis closing bythe automatic function.
When thecontrol unitdetects anobstacle, thewindow
will belowered immediately .
Depending onthe environment ordriving conditions,
the auto-reverse functionmayactivate ifan impact or
load similar tosomething beingcaught inthe window
occurs.
If the window doesnotclose automatically
GUID-89E9 016B-82D8-4 7EC-9036-B6 A63D9DF2B5
If the power window automatic function(closingonly)
does notoperate properly,perform thefollowing
procedure toinitialize thepower window system.
1. Place theignition switchinthe ªONº position.
2. Close thedoor.
3. Open thewindow completely byoperating the
power window switch.
4. Pullthepower window switchandhold itto close
the window ,and then holdtheswitch morethan3
seconds afterthewindow isclosed completely .
5. Release thepower window switch.Operate the
window bythe automatic functiontoconfirm the
initialization iscomplete.
If the power window automatic functiondoesnot
operate properly afterperforming theprocedure above,
have yourvehicle checked byaNISSAN dealer.
Instrume ntsand controls
2-23
&RQGLWLRQ


> (GLW   0RGHO &$@
2-24
Instrument sand controls
GUID-21F8 D9E5-6E1D-4 1EB-B414-B18752598595
WARNING:
. Inan accident youcould bethrown fromthe
vehicle through anopen sunroof. Adults
should always useseat belts andchildren
should always useseat belts orchild
restraint systems.
. Never allowanyone tostand uporextend
any portion oftheir body outofthe opening
while thevehicle isin motion orwhile the
sunroof isclosing.
CAUTION:
. Remove waterdrops, snow,iceorsand from
the sunroof beforeopening.
. Do not place anyheavy objects onthe
sunroof orsurrounding area.
AUT OMA TICSUNROOF
GUID-9D 034432-A8F3- 418B-AFB1-55 6C8C5C8 097
JVI0284X
The sunroof operates whentheignition switchisin the
ªONº position.
Sunshade
GUID-58FB7 DDD-C001-4 291-A467-30 31C590B8FE
T o open orclose thesunshade, slidethesunshade
manually .
The sunshade willopen automatically whenthe
sunroof isopened. Thesunshade needstobe closed
manually bysliding it.
Sunroof
GUID-8D 0D3FA5-F33A -4E19-9F AB-457B7C7DF91A
Tilting:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o tilt up, first close thesunroof, thenpush theUPside
*
2
of the sunroof switchandrelease it;itneed notbe
held. To tilt down thesunroof, pushtheDOWN side
*
1
.
Sliding:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o fully open orclose thesunroof, pushtheOPEN
*
1
or CL OSE
*
2
side ofthe sunroof switchandrelease
it; itneed notbeheld. Theroof willautomatically open
or close allthe way.To stop thesunroof, pushthe
switch oncemore while itis opening orclosing.
Auto-reverse function
GUID-0E6 D6E19-EA EA-4084-818 A-1DB8588E65FD
WARNING:
There isasmall distance justbefore theclosed
position whichcannot bedetected. Makesure
that allpassengers havetheirhands, etc.inside
the vehicle beforeclosing thesunroof.
The auto-reverse functionenablesthesunroof to
automatically reversewhensomething iscaught in
the sunroof asitis closing. Whenthecontrol unit
detects anobstacle, thesunroof willopen immediately .
If the sunroof cannotbeclosed automatically whenthe
auto reverse function activates duetoamalfunction,
push andhold theCLOSE side
*
2
of the sunroof
switch. Depending
onthe environment ordriving conditions,
the auto-reverse functionmayactivate ifan impact or
load similar tosomething beingcaught inthe sunroof
occurs.
If sunroof doesnotoperate
GUID-20E AF9C7-02A E-42EA-A96 A-DAECBA1ED0A2
If the sunroof doesnotoperate properly,perform the
following procedure toinitialize thesunroof operation
system.
1. Ifthe sunroof isopen, closeitfully byrepeatedly
pushing theCLOSE side
*
2
of the sunroof
switch.
2. Push andhold theCLOSE side
*
2
of the sunroof
switch totilt the sunroof up.
3. Release thesunroof switchafterthesunroof
moves slightly upand down.
4. Push andhold theOPEN side
*
1
of the sunroof
switch tofully tiltthe sunroof down.
5. Check ifthe sunroof switchoperates normally.
If the sunroof doesnotoperate properly afterperform-
ing the procedure above,haveyourvehicle checked by
a NISSAN dealer.
SUNROOF (ifequipped)
&RQGLWLRQ


> (GLW   0RGHO &$@
4-2
Heater andairconditioner ,and audio system
GUID-EB 68331A-AB52 -4043-829E-CC3572E DA3B3
WARNING:
. Donot adjust theheater andairconditioner
controls oraudio controls whiledriving so
that fullattention maybegiven tovehicle
operation.
. Ifyou noticed anyforeign objects entering
the system hardware, spilledliquidonthe
system, ornoticed smokeorfumes coming
out from thesystem, orany other unusual
operation isobserved, stopusing thesystem
immediately andcontact thenearest
NISSAN dealer.Ignoring suchconditions
may lead toan accident, fireorelectric
shock.
. Donot disassemble ormodify thissystem. If
you do,itmay lead toan accident, fire,or
electric shock.
CAUTION:
Do not use thesystem whentheengine isnot
running forextended periodsoftime toprevent
battery discharge.
GUID-10AFA7C1-CB91-4B5B-9B CE-890B3A9C63E0
When theshift lever isshifted intotheªRº (Reverse)
position, themonitor displayshowsarearward view
from thevehicle.
The system isdesigned asan aid tothe driver in
situations suchasslot parking orparallel parking.
Designs anditems displayed onthe screen mayvary
depending onthe models.
WARNING:
. The Rearview Monitorisaconvenience butit
is not asubstitute tocheck behind the
vehicle whenbacking up.The driver is
always responsible forsafety during parking
and other manoeuvres.
. Objects viewedinthe Rearview Monitor
differ fromactual distance becauseawide-
angle lensisused. Objects inthe Rearview
Monitor willappear visually opposite like
ones viewed inthe inside andoutside
mirrors.
. Make surethattheback doorissecurely
closed whenbacking up.
. Underneath thebumper andthecorner
areas ofthe bumper cannotbeviewed on
the Rearview Monitorbecause ofits mon-
itoring rangelimitation.
. Donot putanything onthe Rearview cam-
era.
. The Rearview cameraisinstalled abovethe
license plate.
. When washing thevehicle withhigh-pres-
sure water, besure nottospray itaround the
camera. Otherwise, watermayenter the
camera unitcausing watercondensation on
the lens, amalfunction, fireoran electric shock.
. Donot strike thecamera. Itis aprecision
instrument. Otherwise,itmay malfunction or
cause damage resulting inafire oran
electric shock.
CAUTION:
Do not scratch thecamera lenswhen cleaning
dirt orsnow fromthelens.
HOW TO READ THEDISPLA YEDLINES
GUID-B9 963594-2 D85-4A0D-B2 98-9AF6F 289A0F5
SAA2776
Guide lineswhich indicate thevehicle widthand
distances toobjects withreference tothe bumper line
*
A
are displayed onthe monitor.
Distance guidelines:
Indicate distances fromthevehicle body.
. Red line
*
1
: approx. 0.5m(1.5 ft)
. Yellow line
*
2
: approx. 1m (3 ft)
. Green line
*
3
: approx. 2m (7 ft)
. Green line
*
4
: approx. 3m (10 ft)
SAFETY PRECAUTI ONS REARVIEWMONITOR(ifequippe d)
&RQGLWLRQ


> (GLW   0RGHO &$@
turning theignition switchtoSTART .Release
the ignition switchwhentheengine starts.Ifthe
engine starts,butfails torun, repeat theabove
procedure.
CAUTION:
. Assoon asthe engine hasstarted, release
the ignition switchimmediately.
. Donot operate thestarter formore than15
seconds atatime. Ifthe engine doesnot
start, pushtheignition switchtothe ªOFFº
position andwait 10seconds beforecrank-
ing the engine again.Otherwise, thestarter
could bedamaged.
. Ifitbecomes necessary tostart theengine
with abooster batteryandjumper cables,
the instructions andcautions contained in
the ª6.Incase ofemergencyº sectionshould
be carefully followed.
5. Allow theengine toidle foratleast 30seconds
after starting theengine towarm-up. Driveat
moderate speedsforashort distance first,
especially incold weather.
CAUTION:
Do not leave thevehicle unattended whilethe
engine iswarming up.
6. To stop theengine, movetheshift lever tothe ªPº
(Park) position (CVTmodel) ormove theshift lever
to the ªNº (Neutral) position(MTmodel) ,apply the
parking brakeandpush theignition switchtothe
ªOFFº position.
GUID-FC 8DD999-53 2D-4255-B52B-8544BB F23419
DRIVING WITHCONTINUOUSL YVARI-
ABLE TRANSMISSION (CVT)
GUID-CA 3CA43B-2A 6A-4E78-941 9-61BAC1DD D7EF
The Continuously Variable Transmission (CVT)inyour
vehicle iselectronically controlledtoproduce maximum
power andsmooth operation.
The recommended operatingprocedures forthis
transmission areshown onthe following pages.Follow
these procedures formaximum vehicleperformance
and driving enjoyment.
WARNING:
Do not downshift abruptlyonslippery roads.
This maycause aloss ofcontrol.
CAUTION:
. The cold engine idlespeed ishigh, souse
caution whenshifting thetransmission into
a forward orreverse position beforethe
engine haswarmed up.
. Avoid revving upthe engine whilethe
vehicle isstopped. Thiscould cause unex-
pected vehicle movement.
. Never shifttoeither theªPº (Park) orªRº
(Reverse) positionwhilethevehicle ismov-
ing. This could cause serious damage tothe
transmission.
. Except inan emergency, donot shift tothe
ªNº (Neutral) positionwhiledriving. Coast-
ing with thetransmission inthe ªNº (Neutral)
position maycause serious damage tothe
transmission.
. Start theengine ineither theªPº (Park) or
ªNº (Neutral) position.Theengine willnot
start inany other position. Ifitdoes, have your
vehicle checked byaNISSAN dealer.
. Shift intotheªPº (Park) position andapply
the parking brakewhenatastandstill for
longer thanashort waiting period.
. Keep theengine atidling speed while
shifting fromtheªNº (Neutral) positionto
any driving position.
. When stopping thevehicle onanuphill
grade, donot hold thevehicle bydepressing
the accelerator pedal.Thefoot brake pedal
should bedepressed inthis situation.
Starting vehicle
GUID-9E5 839FD-C45 3-4C86-B65 8-6D40F7F1CF16
1. After starting theengine, fullydepress thefoot
brake pedalbefore moving theshift lever outofthe
ªPº (Park) position.
2. Keep thefoot brake pedaldepressed andmove
the shift lever toadriving position.
3. Release theparking brake,thefoot brake pedal,
and then gradually startthevehicle inmotion.
The CVT isdesigned sothe foot brake pedal
MUST bedepressed beforeshifting fromtheªPº
(Park) position toany driving position whilethe
ignition switchisin the ªONº position.
The shift lever cannot bemoved outofthe ªPº
(Park) position andinto anyofthe other
positions ifthe ignition switchisplaced inthe
ªLOCKº ,ªOFFº orªACCº position orifthe key is
removed.
CAUTION:
. DEPRESS THEFOOTBRAKE PEDAL-Shift-
ing the shift lever toªDº ,ªR º, ªL º or the
manual shiftmode without depressing the
foot brake pedalcauses thevehicle tomove
Starting anddriving
5-9
DRIVING
VEHICLE
&RQGLWLRQ


> (GLW   0RGHO &$@
5-10
Starting anddriving
slowly whentheengine isrunning. Make
sure thefoot brake pedalisdepressed fully
and thevehicle isstopped beforeshifting
the shift lever.
. MAKE SUREOFTHE SHIFT LEVER POSI-
TION -Make suretheshift lever isin the
desired position. ªDºand ªLºor manual shift
mode areused tomove forward andªRºto
back up.
. WARM UPTHE ENGINE -Due tothe higher
idle speeds whentheengine iscold, extra
caution mustbeexercised whenshifting the
shift lever intothedriving position immedi-
ately afterstarting theengine.
Shifting
GUID-22528B F3-29D9-403E-AE79-B EA15D2F63 FE
JVS0199X
With manual shiftmode (RHD model)
JVO0030X
Without manualshiftmode (LHD model)

Push thebutton
*
A
while depressing the
foot brake
pedal.

Push thebutton
*
A
.

Just move theshift lever.
WARNING:
. Apply theparking brakeifthe shift lever isin
any position whiletheengine isnot running.
Failure todo socould cause thevehicle to
move unexpectedly orroll away andresult in
serious personal injuryorproperty damage.
. Ifthe shift lever cannot bemoved fromthe
ªPº (Park) position whiletheengine is
running andthefoot brake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause an
accident injuringyourself andothers.
After starting theengine, fullydepress thefoot brake
pedal, pushtheshift lever button andmove theshift
lever outofthe ªPº (Park) position.
If the ignition switchisplaced inthe ªOFFº orªACCº
position forany reason whiletheshift lever isin any positions
otherthantheªPº (Park) position, theignition
switch cannot beplaced inthe ªLOCKº position.
If the ignition switchcannot beplaced inthe ªLOCKº
position, performthefollowing steps:
1. Apply theparking brake.
2. Place theignition switchinthe ªONº position
while depressing thefoot brake pedal.
3. Move theshift lever tothe ªPº (Park) position.
4. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position.
P (Park) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition whenthevehicle isparked orwhen
starting theengine. Makesurethatthevehicle is
completely stoppedandmove theshift lever into
the ªPº(Park) position. Applytheparking brake.
When parking onahill, first depress thefoot brake
pedal, applytheparking brake,andthen move theshift
lever intotheªPº (Park) position.
R (Reverse) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition toback up.Make surethatthevehicle
is completely stoppedbeforeselecting theªRº
(Reverse) position.
N (Neutral) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Neither theforward norreverse gearisengaged. The
engine canbestarted inthis position. You may shift to
the ªNº (Neutral) positionandrestart astalled engine
while thevehicle ismoving.
&RQGLWLRQ


> (GLW   0RGHO &$@
DRIVING WITHMANUAL TRANSMISSION
(MT)
GUID-08 EE8EF5-22C A-45AE-97E1-FC6FB2E7 A861
WARNING:
. Donot downshift abruptlyonslippery roads.
This maycause aloss ofvehicle control.
. Donot over-rev theengine whenshifting to
a lower gear.Thismay cause aloss of
vehicle control orengine damage.
CAUTION:
. Donot rest your footonthe clutch pedal
while driving. Thismay damage theclutch
system.
. Fully depress theclutch pedalbefore shift-
ing tohelp prevent transmission damage.
. Stop thevehicle completely beforeshifting
into theªRº(Reverse) position.
. When thevehicle isstopped foraperiod of
time, forexample waitingatstoplights, shift
to the ªNº (Neutral) positionandrelease the
clutch pedalwiththefoot brake pedal
depressed.
. Do not shift tothe ªNº (Neutral) position
while driving. Doingsomay result inan
accident duetoloss ofengine braking.
Starting vehicle
GUID-167 57328-65F A-4660-BD9B-5E4335 1F3AF1
1. After starting theengine, depress theclutch pedal
to the floor andmove theshift lever tothe ª1º(1st)
or ªRº (Reverse) position.
2. Slowly depress theaccelerator pedal,releasing
the clutch pedalandparking brakeatthe same
time.
Shifting gear
GUID-70 8BE0C7-A6C5 -48DA-A9C3-3AD53F8A3 232
T o change gears,orwhen upshifting ordownshifting,
fully depress theclutch pedal, shiftintotheappropriate
gear, thenslowly andsmoothly releasetheclutch
pedal.
T o ensure smooth gearchanges, fullydepress the
clutch pedalbefore operating theshift lever. Ifthe
clutch pedalisnot fully depressed beforethe
transmission isshifted, agear noise maybeheard.
T ransmission damagecouldoccur.
Start thevehicle inthe ª1º(1st) position andshift to
the ª2º(2nd) ,ª3º (3rd) ,ª4º (4th) ,ª5º (5th) andª6º
(6th) (ifequipped) gearinsequence according tothe
vehicle speed.
If itis difficult tomove theshift lever intotheªRº
(Reverse) orª1º (1st) position, shifttothe ªNº (Neutral)
position, andthen release theclutch pedalonce.Fully
depress theclutch pedalagainandshift intoªRºorª1º
.
SSD0084
5-speed ManualTransmission (MT)model:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Y ou cannot shiftdirectly fromtheª5º (5th) position into
the R(Reverse) position.FirstshiftintotheN(Neutral)
position, thenshiftintotheR(Reverse)
position.
SSD0552
6-speed ManualTransmission (MT)model:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. To reverse, stopthevehicle andmove theshift
lever intotheN(Neutral) position,andthen pull
the ring
*
1
upward toshift intotheR(Reverse)
position.
. The ring returns toits original position whenthe
shift lever ismoved tothe N(Neutral) position.
Starting anddriving
5-13
&RQGLWLRQ


> (GLW   0RGHO &$@
warning light
may illuminate. Thisisnot
a malfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate.
. The VDC system isnot asubstitute forwinter
tires ortire chains onasnow covered road.
The Vehicle Dynamic Control(VDC)system uses
various sensors tomonitor driverinputs andvehicle
motion. Undercertain drivingconditions, theVDC
system helpstoperform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC system canhelp thedriver tomaintain control
of the vehicle, butitcannot prevent lossofvehicle
control inall driving situations.
When theVDC system operates, theVDC warning
light
in the instrument panelflashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path. .
You may feelapulsation inthe brake pedaland
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC system is
working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If amalfunction occursinthe system, theVDC warning
light
illuminates inthe instrument panel.TheVDC
system automatically turnsoff.
The VDC OFFswitch isused toturn offthe VDC
system. TheVDC offindicator light
illuminates to
indicate theVDC system isoff. When theVDC OFF
switch isused toturn offthe system, theVDC system
still operates toprevent onedrive wheel fromslipping
by transferring powertoanon slipping drivewheel.
The VDC warning light
flashes ifthis occurs. All
other VDCfunctions areoffand theVDC warning light
will not flash. TheVDC system isautomatically
reset toon when theignition switchisplaced inthe
ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning lightº
(P .2-14) andªVehicle Dynamic Control(VDC)off
indicator lightº(P.2-16) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº
noise and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)OFF
SWIT CH
GUID-A9257 017-A8BE-40D0-9E2E-32 15E14F5 026
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC
system reduces theengine outputtoreduce wheel
spin. Theengine speedwillbereduced evenifthe
accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC system off.
T o turn offthe VDC system, pushtheVDC OFFswitch.
The
indicator lightwillilluminate.
Push theVDC OFFswitch againorrestart theengine
to turn ONthesystem.
Starting anddriving
5-15
&RQGLWLRQ


> (GLW   0RGHO &$@
5-18
Starting anddriving
SSD0488
Left-Hand Drive(LHD) models
SSD0489
Right-Hand Drive(RHD) models
1. Firmly applytheparking brake.
2. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªRº (Reverse) position.Whenparking
on anuphill grade, movetheshift lever tothe ª1º
(1st) position.
3. To help prevent thevehicle frommoving intotraffic
when parked onanincline, itis agood practice to
turn thewheels asillustrated.
HEADED DOWNHILL WITHCURB
*
1
T urn thewheels towards thecurb andmove the vehicle
forward untilthecurb sidewheel gently
touches thecurb. Thenapply theparking brake.
HEADED UPHILLWITHCURB
*
2
T urn thewheels awayfromthecurb andallow the
vehicle tomove backuntilthecurb sidewheel
gently touches thecurb. Thenapply theparking
brake.
HEADED UPHILLORDOWNHILL, WITHOUT
CURB
*
3
T urn thewheels towardtheside ofthe road sothe
vehicle willmove awayfromthecenter ofthe road
if the vehicle moves. Thenapply theparking brake. 4.
Model withIntelligent Keysystem:
Place theignition switchinthe ªOFFº position.
Model without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position
and remove thekey.
&RQGLWLRQ


> (GLW   0RGHO &$@
GUID-DFB9BB 02-A8E0-46F3-B664-EF0 30E33D6AA
JVS0086X
WARNING:
. The sonar (parking sensor)systemisa
convenience butitis not asubstitute for
proper parking. Alwayslookaround and
check thatitis safe todo sobefore parking.
Always moveslowly.
. Read andunderstand thelimitations ofthe
sonar (parking sensor)systemascontained
in this section. Inclement weathermayaffect
the function ofthe sonar (parking sensor)
system; thismay include reduced perfor-
mance orafalse activation.
. This system isnot designed toprevent
contact withsmall ormoving objects.
. The system isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
will notdetect smallobjects belowthe
bumper, andmay notdetect objects close
to the bumper oron the ground.
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing inaccurate
measurement ofobstacles or
false alarms.
CAUTION:
Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
When theignition switchisin the ªONº position, the
sonar (parking sensor)systemisoperational.
The sonar (parking sensor)systemsounds atone to
warn thedriver ofobstacles nearthebumper. The
system detects rearobstacles whentheshift lever isin
the ªRº (Reverse) position.Thesystem maynotdetect
objects atspeeds above10km/h (6MPH) andmay
not detect certain angular ormoving objects.
The sonar (parking sensor)systemdetects obstacles
up to1m (3.3 ft)from thebumper withadecreased
coverage areaatthe outer corners ofthe bumper,
(refer tothe illustration forapproximate zonecoverage
areas) .As you move closer tothe obstacle, therate of
the tone increases. Whentheobstacle isless than 30
cm (11.8 in)away ,the tone willsound continuously .
K eep thesonar sensors (located onthe bumper fascia)
free from snow ,ice and large accumulations ofdirt (do not
clean thesensors withsharp objects) .If the
sensors arecovered, itwill affect theaccuracy ofthe
sonar (parking sensor)system.
If the sonar (parking sensor)systemmalfunc-
tions, thebeep sounds for3seconds whenthe
shift lever ismoved tothe ªRº(Reverse) position.
Have thesystem checked byaNISSAN dealer.
Starting anddriving
5-19
SONAR
(parking sensor)SY STEM (if
equipped)
&RQGLWLRQ