Panel NISSAN PULSAR 2015 User Guide


> (GLW   0RGHO &$@
GUID-218B1 7C5-422C-4FAE-99C4- AA3A74107 073
XENON HEADLIGHTS (ifequipped)
GUID-D5FEC 0EB-A466-47 42-B448-DEC77F659521
WARNING:
HIGH VOLTAGE
. When xenon headlights areon,they produce
a high voltage. To prevent anelectric shock,
never attempt tomodify ordisassemble.
Always haveyourxenon headlights checked
and/or replaced ataNISSAN dealer.
. Xenon headlights provideconsiderably
more lightthanconventional headlights.If
they arenot correctly aimed,theymight
temporarily blindanoncoming driverora
driver ahead ofyou and could cause a
serious accident. Immediately takeyour
vehicle toaNISSAN dealerandhave the
headlights adjustedcorrectly.
When thexenon headlights areinitially turnedon,their
brightness andcolor varyslightly .However, thecolor
and brightness willsoon stabilize.
The lifeofxenon headlights willbeshortened by
frequent on-offoperation. Itis generally desirable not
to turn offthe headlights forshort intervals.
If the xenon headlight bulbisclose toburning out,the
brightness willdrastically decrease,theheadlight will
start blinking, orthe color ofthe headlight willbecome
reddish. Ifone ormore ofthe above conditions appear,
contact aNISSAN dealer.
HEADLIGHT SWITCH
GUID-A8314 E0E-EC8C-4483-813A-B 5EB9E8CF C25
SIC3782
T ype A
SIC3783
T ype B
NISSAN recommends thatyouconsult thelocal
regulations concerning theuse oflights.
AUT Oposition (ifequipped)
GUID-2CEC3 A16-6D49-4F4 5-8731-D6F8C92C4A8F
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated continuously)
.
When theignition switchisplaced inthe ªOFFº
position, thelights willturn offautomatically .
SAA1755
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
1
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
position
GUID-F6 9BE745-A75 E-4F65-8BE6 -CB953D195A14
The
position turnsonthe front clearance,
instrument panel,tailand license plate
lights.
position
GUID-E8 7178D3-B8DB -448C-9D82-DD49492DD1E4
The
position turnsonthe headlights inaddition to
the other lights.
Instrume ntsand controls
2-17
HEADLIGHT
ANDTURN SIGNAL
SWIT CH
&RQGLWLRQ


> (GLW   0RGHO &$@
. When theIntelligent Key isleft inside thevehicle
. When theIntelligent Key isnot within the
operational range
. When anydoor isopen ornot closed securely
. When theIntelligent Key battery isdischarged
. When theignition switchisin the ªACCº orªONº
position
SP A2407
. Donot push thedoor handle request switchwith
the Intelligent Key held inyour hand asillustrated.
The close distance tothe door handle willcause
the Intelligent Key system tohave difficulty
recognizing thattheIntelligent Key isoutside the
vehicle.
. After locking thedoors usingthedoor handle
request switch,makesurethatthedoors have
been securely lockedbyoperating thedoor
handles.
. When locking thedoors usingthedoor handle
request switch,makesuretohave theIntelligent
K ey inyour possession beforeoperating thedoor
handle request switchtoprevent theIntelligent
K ey from being leftinthe vehicle.
. Thedoor handle request switchisoperational only
when theIntelligent Key has been detected bythe
Intelligent Key system. .
Donot pull thedoor handle beforepushing the
door handle request switch.Thedoor willbe
unlocked butwillnot open. Release thedoor
handle onceandpullitagain toopen the door.
SP A2710
SP A2545
When youcarry theIntelligent Key with you,youcan
lock orunlock alldoors bypushing thedoor handle
request switch(driver's orfront passenger's)
*
A
or
back doorrequest switch
*
B
within therange of
operation.
When youlock orunlock thedoors oropen theback
door, thehazard indicator willflash andtheoutside
chime willsound asaconfirmation. Fordetails, see
ªHazard indicator andoutside chimeoperationº (P.3- 13)
.
Locking doors
GUID-46 A34B66-C7EC -44ED-B6E4-34709BCF1E B0
1. Push theignition switchtothe ªOFFº position.
2. Carry theIntelligent Key with you.
3. Close alldoors.
4. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or the back doorrequest
switch
*
B
.
5. Alldoors andtheback doorwillbelocked.
6. Operate doorhandles toconfirm thatthedoors
have been securely locked.
Lockout protection:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o prevent theIntelligent Key from being accidentally
locked inthe vehicle, lockoutprotection isequipped
with theIntelligent Key system.
. When theIntelligent Key isleft inthe vehicle and
you trytolock thedoor using thedriver's inside
lock knob aftergetting outofthe vehicle, allthe
doors willunlock automatically andachime will
sound afterthedoor isclosed.
. When thedriver's sidedoor isopen andthe
Intelligent Key isinside thevehicle (including
luggage room),the doors cannot belocked using
the power doorlockswitch.
CAUTION:
The lockout protection maynotfunction under
the following conditions:
. When theIntelligent Keyisplaced ontop of
the instrument panel.
. When theIntelligent Keyisplaced onthe
cargo cover.
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ


> (GLW   0RGHO &$@
3-14
Pre-driving checksandadjustments
GUID-C3B 71A2F-226 3-4BD0-AEF 3-1E0562880E42
Y our vehicle isequipped withNISSAN Anti-theft
System (NATS)*.
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-036 EA410-EB76 -4EA4-B53B-6ABB43 43E2A9
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Security indicator light
GUID-769789 21-F8F5-4B9C-B81F-AAE 7B38642C 4
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS.
The light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
GUID-84DFC8 CD-2300-48BD-B6F0-707623C404FF
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
SECURITY SY STEM (ifequipped) HOOD
&RQGLWLRQ


> (GLW   0RGHO &$@
OPENING HOOD
GUID-E277 3E78-51C8-4 5B7-B6C8-B152AF80 8F99
JVP0058X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
push thelever sideways withyour fingertips.
3. Raise thehood
*
3
.
4. Remove thesupport rod
*
4
and insert itinto the
slot
*
5
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
GUID-BF1C1 017-F13A-42F0-BA94-57D4BCDCA2 AC
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
CAUTION:
Before closing thehood, besure torelease the
support rodand store itin position. Otherwise,
the support rodwill bedamaged.
GUID-024 607D4-DAF 0-4850-925 1-C15DC895 5DAA
WARNING:
. Make suretheback doorhasbeen closed
securely toprevent itfrom opening while
driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle.
CAUTION:
. Before opening theback door, besure to
clear away snow, iceordust thatmay be
stuck tothe back door. Ifthe back dooris
opened whilematerials arestill stuck toit,it
may suddenly closeagain duetothe weight
of these materials.
. Always besure tofully open theback door. If
it is not fully opened, itmay suddenly shut.
. Beespecially carefulwhenopening theback
door instrong wind.Thedoor could be
caught byagust ofwind andmay close
suddenly.
JVP0059X
Pre-driving checksandadjustments
3-15
BACK
DOOR
&RQGLWLRQ


> (GLW   0RGHO &$@
4-6
Heater andairconditioner ,and audio system
GUID-D6D 9F812-CB78-4 FA4-ADF1 -EACDF07131 0D
WARNING:
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchisin the
ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
OPERA TINGTIPS(forautomatic aircondi-
tioner)
GUID-16D CCDD4-D6 9F-42A3-BE 18-3ABDA 970B57C
JVH0067X
JVH0063X
Left-Hand Drive(LHD) model*
*: The illustration isfor the Left-Hand Drive(LHD)
model. FortheRight-Hand Drive(RHD) model, the
layout willbethe opposite.
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot put
anything onoraround thesensors.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ


> (GLW   0RGHO &$@
5-6
Starting anddriving
possible. (SeeªJump startingº (P.6-5) .)
Operating range
GUID-80A4 4E43-0A1B -4ABB-A7E6-B D571734D53 C
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent
K ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-59131E CE-A47C-4849-A212-5FF7051D7462
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position. When
pushing theignition switchtothe ªOFFº position, make
sure theshift lever isin the ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Push theignition switchtothe ªOFFº position.
3. Open thedoor. Theignition switchwillchange to
the ªLOCKº position.
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake depressed.
STEERING LOCK
GUID-E05 63F6E-C5FD- 4C6A-83D7-9D 4CAE048AA9
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-199 0FCB9-1E4 5-4067-918 5-B54F6548 9D5D
1. Push theignition switchtothe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-836 CAB5B-2A97-4D4D-B A13-0D61A7DEAB3B
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe ignition switchposition doesnot
change fromtheªLOCKº position, pushthe
ignition switchagainwhilerotating the
steering wheelslightly tothe right andleft.
IGNITION SWITCHPOSITIONS
GUID-787 88975-EF20-4EEC-9 BD9-C8FD 1F38789B
SSD0859
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission
model) orthe clutch pedal(Manual Transmission
model) ,the ignition switchposition willchange as
follows:
. Push oncetochange toªACCº .
. Push twotimes tochange toªONº .
. Push three times tochange toªOFFº .
&RQGLWLRQ


> (GLW   0RGHO &$@
warning light
may illuminate. Thisisnot
a malfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate.
. The VDC system isnot asubstitute forwinter
tires ortire chains onasnow covered road.
The Vehicle Dynamic Control(VDC)system uses
various sensors tomonitor driverinputs andvehicle
motion. Undercertain drivingconditions, theVDC
system helpstoperform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC system canhelp thedriver tomaintain control
of the vehicle, butitcannot prevent lossofvehicle
control inall driving situations.
When theVDC system operates, theVDC warning
light
in the instrument panelflashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path. .
You may feelapulsation inthe brake pedaland
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC system is
working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If amalfunction occursinthe system, theVDC warning
light
illuminates inthe instrument panel.TheVDC
system automatically turnsoff.
The VDC OFFswitch isused toturn offthe VDC
system. TheVDC offindicator light
illuminates to
indicate theVDC system isoff. When theVDC OFF
switch isused toturn offthe system, theVDC system
still operates toprevent onedrive wheel fromslipping
by transferring powertoanon slipping drivewheel.
The VDC warning light
flashes ifthis occurs. All
other VDCfunctions areoffand theVDC warning light
will not flash. TheVDC system isautomatically
reset toon when theignition switchisplaced inthe
ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning lightº
(P .2-14) andªVehicle Dynamic Control(VDC)off
indicator lightº(P.2-16) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº
noise and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)OFF
SWIT CH
GUID-A9257 017-A8BE-40D0-9E2E-32 15E14F5 026
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC
system reduces theengine outputtoreduce wheel
spin. Theengine speedwillbereduced evenifthe
accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC system off.
T o turn offthe VDC system, pushtheVDC OFFswitch.
The
indicator lightwillilluminate.
Push theVDC OFFswitch againorrestart theengine
to turn ONthesystem.
Starting anddriving
5-15
&RQGLWLRQ


> (GLW   0RGHO &$@
5-16
Starting anddriving
GUID-D9A2 662F-4922-4 5F1-98FB-77EC7CFF7 173
SSD0694
1. RESUME/ACCELERA TEswitch
2. SET/COAST switch
3. CANCEL switch
4. Cruise control MAINswitch
WARNING:
. Always observe theposted speedlimitsand
do not setthe speed overthem.
. Donot use thecruise control whendriving
under thefollowing conditions. Doingso
could cause aloss ofvehicle control and
result inan accident.
Ð When itis not possible tokeep the
vehicle ataconstant speed
Ð When driving inheavy traffic
Ð When driving intraffic thatvaries speed
Ð When driving inwindy areas
Ð When driving onwinding orhilly roads
Ð When driving onslippery (rain,snow, ice,
etc .)roads
CAUTION:
On manual Transmission (MT)model, donot
shift tothe ªNº (Neutral) positionwithout
depressing theclutch pedalwhenthecruise
control isoperated. Shouldthisoccur, depress
the clutch pedalandturn thecruise control MAIN
switch offimmediately. Failuretodo somay
cause engine damage.
PRECAUTIONS ONCRUISE CONTROL
GUID-F50E3 DC7-859C-46F8-BC38-59BFA63C6C9 0
. Ifthe cruise control system malfunctions, itwill
cancel automatically .The CRUISE indicator light
on the meter panelwillthen blink towarn the
driver.
. Ifthe engine coolant temperature becomes
excessively high,thecruise control system will
cancel automatically .
. Ifthe CRUISE indicator lightblinks, turnthecruise
control MAINswitch offand have thesystem
checked byaNISSAN dealer.
. The CRUISE indicator lightmayblink when the
cruise control MAINswitch isturned ONwhile
pushing theRESUME/ACCELERA TE,SET/
COAST orCANCEL switch.To properly setthe
cruise control system, perform thefollowing
procedures.
CRUISE CONTROL OPERATIONS
GUID-738 F3BB0-3C2E-4 375-95D7-54DD457F2 984
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
The cruise control willautomatically becanceled ifthe
vehicle slowsdownmorethanapproximately 13km/h
(8 MPH) below thesetspeed.
Moving theshift lever tothe ªNº (Neutral) position
(Continuously Variable Transmission model)ordepres-
sing theclutch pedal(Manual Transmission model)will
cancel thecruise control andtheCRUISE indicator
light willturn off.
T urning oncruise control
GUID-5EE 83BAE-9DA 6-4DFF-97D 2-23EA9F05 B504
Push thecruise control MAINswitch. TheCRUISE
indicator lightilluminates.
Setting cruising speed
GUID-A62E 93CF-7746-4F51-9653-7 4B5844CB6C7
1. Accelerate tothe desired speed.
2. Push theSET/COAST switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control.
CRUISE CONTROL (ifequippe d)
&RQGLWLRQ


> (GLW   0RGHO &$@
5-24
Starting anddriving
Self-test feature
GUID-25A1 2632-42C1- 404E-B198-BDCF201D1 532
The ABS includes electronic sensors,electricpumps,
hydraulic solenoids andacomputer. Thecomputer has
a built-in diagnostic featurethattests thesystem each
time youstart theengine andmove thevehicle atalow
speed inforward orreverse. Whentheself-test
occurs, youmay hear aªclunkº noiseand/or feela
pulsation inthe brake pedal. Thisisnormal anddoes
not indicate amalfunction. Ifthe computer sensesa
malfunction, itswitches theABS offand illuminates the
ABS warning lightonthe instrument panel.Thebrake
system thenoperates normally,but without anti-lock
assistance.
If the ABS warning lightilluminates duringtheself-test
or while driving, havethevehicle checked bya
NISSAN dealer.
Normal operation
GUID-731 7FE84-7D F1-491B-AE 03-A1D3516 5D3DC
The ABS operates atspeeds above5to 10 km/h (3to
6 MPH) .The speed variesaccording toroad condi-
tions.
When theABS senses thatoneormore wheels are
close tolocking up,the actuator rapidlyapplies and
releases hydraulic pressure. Thisaction issimilar to
pumping thebrakes veryquickly .You may feela
pulsation inthe brake pedalandhear anoise from
under thehood orfeel avibration fromtheactuator
when itis operating. Thisisnormal andindicates that
the ABS isoperating properly.However, thepulsation
may indicate thatroad conditions arehazardous and
extra careisrequired whiledriving.
GUID-161 29265-62AC- 4A0C-9B39-4 8A5D69BB276
When leaving yourvehicle unoccupied:
. Always takethekey with you-even when leaving
the vehicle inyour owngarage.
. Close allwindows completely andlock alldoors.
. Always parkyourvehicle whereitcan beseen.
Park inawell litarea during thenight.
. Ifthe security systemisequipped, useit-even for
a short period.
. Never leavechildren orpets inthe vehicle
unattended.
. Never leavevaluables insidethevehicle. Always
take valuables withyou.
. Never leavethevehicle documents inthe vehicle.
. Never leavearticles onaroof rack. Remove them
from therack andkeep andlock them inside the
vehicle.
. Never leavethespare keyinthe vehicle.
GUID-EBC9 7F4F-D1CC-40F0-8EC6-B8EC419B4 084
WARNING:
. Whatever thecondition, drivewithcaution.
Accelerate anddecelerate withgreat care.If
accelerating ordecelerating toofast, the
drive wheels willlose even more traction.
. Allow morestopping distanceincold weath-
er driving. Braking shouldbestarted sooner
than ondry pavement.
. Keep atagreater distance fromthevehicle
in front ofyou onslippery roads.
. Wet ice(08C ,328F andfreezing rain),very
cold snow andicecan beslick andvery
difficult todrive on.The vehicle willhave a
lot less traction orgrip under thesecondi-
tions. Try to avoid driving onwet iceuntil the
road issalted orsanded.
. Watch forslippery spots(glaring ice).These
may appear onanotherwise clearroadin
shaded areas.Ifapatch ofice isseen ahead,
brake before reaching it.Try not tobrake
while actually onthe ice, and avoid any
sudden steering maneuvers.
. Donot use cruise control onslippery roads.
. Snow cantrap dangerous exhaustgasunder
your vehicle. Keepsnow clearofthe exhaust
pipe andfrom around yourvehicle.
VEHICLE SECURITY COLDWEATHER DRIVING
&RQGLWLRQ


> (GLW   0RGHO &$@
GUID-B2B2F4 0E-6DE1-431F-BFF7-7AD3044C6450
MOST COMMON FACT ORS CONTRIBUT -
ING TO VEHICLE CORROSION
GUID-55FEE ED2-A1C3-4B27-A550-4 BBB7C8BF9E6
. The accumulation ofmoisture-retaining dirtand
debris inbody panel sections, cavities,andother
areas.
. Damage tothe paint surface andother protective
coatings causedbygravel andstone chipsor
minor traffic accidents.
ENVIRONMENT ALFACT ORS INFLUENCE
RA TE OF CORROSION
GUID-4D36D3 87-64CA-4EA3-9221-16 9D30C6EC41
Moisture
GUID-6F642 1FF-23F2-4A51-AC98-F 8467A5769E8
The accumulation ofsand, dirtand water onthe inside
floor ofthe vehicle canaccelerate corrosion.Wet floor
carpet/floor matswillnotdrycompletely insidethe
vehicle. Theyshould beremoved andcompletely dried
to avoid floorpanel corrosion.
Relative humidity
GUID-C51 023EB-DA4 E-4AAD-B64 6-D10FD396 0B66
Corrosion willbeaccelerated inareas ofhigh relative
humidity .
T emperature
GUID-084 19ED2-3D0 9-4F9D-9B3 6-E32282165145
High temperatures acceleratetherate ofcorrosion to
those partswhich arenot well ventilated.
Corrosion willalso beaccelerated inareas where the
temperatures stayabove freezing.
Air pollution
GUID-413 0D607-993 9-412C-83E 9-6FC9F3EC20 D9
Industrial pollution, thepresence ofsalt inthe airin
coastal areas,orheavy roadsaltuse accelerates the
corrosion process.Roadsaltalso accelerates the
disintegration ofpaint surfaces.
T O PRO TECT YOUR VEHICLE FROM
CORROSION
GUID-77 A08170-1F EB-45EA-BDB 9-316B61A611C0
. Wash and wax your vehicle oftentokeep the
vehicle clean.
. Always checkforminor damage tothe paint
surface andifany exists, repairitas soon as
possible.
. Keep thedrain holes inthe lower edgeofthe
doors opentoavoid water accumulation.
. Check thevehicle underbody foraccumulation of
sand, dirtorsalt. Ifpresent, washwithwater as
soon aspossible.
CAUTION:
. Never remove dirt,sand orother debris from
the passenger compartment bywashing it
out with ahose. Remove dirtwith avacuum
cleaner.
. Never allowwater orother liquids tocome in
contact withelectronic components inside
the vehicle asthis may damage them.
Chemicals usedforroad surface deicingareextremely
corrosive. Theyaccelerate corrosionanddeterioration
of underbody components suchasthe exhaust system,
fuel and brake lines,brake cables, floorpanand
fenders.
In the winter, theunderbody mustbecleaned
periodically.
For additional protection againstrustandcorrosion,
which mayberequired insome areas, consult a
NISSAN dealer.
Appearan ceand care
7-5
CORROSIO
NPRO TECTION
&RQGLWLRQ