Front NISSAN PULSAR 2016 Service Manual


> (GLW   0RGHO &$@
LUGGAGE HOOKS(ifequipped)
GUID-A AC70B0C-3 DE3-4704-AB 27-24713 D6A4F62
JVI0293X
The hooks arelocated inthe luggage area.
CAUTION:
Do not apply atotal loadofmore than3kg (7lb)
to asingle hook.
GUID-DE6 C9486-A891-4CE9-85E A-4990109A0 28C
SIC2872
1. To block outglare fromthefront, swing down
*
1
the sun visor.
2. To block glarefromtheside, remove thesun visor
from thecenter mountandswing itto the side
*
2
.
GUID-B2 421D01-11 6A-4BF7-A7F6 -3E979908B4FE
CAUTION:
. Donot leave thelight switch onwhen the
engine isnot running forextended periods
of time toprevent thebattery frombeing
discharged.
. Turn offthe lights whenyouleave the
vehicle.
ROOM LIGHT
GUID-29E A7276-8B60 -4B5A-9975-033DCA510EF A
SIC2063A
The room lighthasathree-position switch.
When theswitch isin the ªONº position
*
1
, the room
light illuminates.
When theswitch isin the ªDOORº position
*
2
, the
room lightilluminates whenadoor isopened.
The interior lighttimer willkeep theroom lightonfor
approximately 15seconds when:
. The keyisremoved fromtheignition switchwith
the driver's doorclosed. (modelwithout Intelligent
K ey system)
. Theignition switchisplaced inthe ªOFFº position.
(model withIntelligent Key system)
Instrume ntsand controls
2-29
SUN
VISORS INTERIORLIGHTS
&RQGLWLRQ


> (GLW   0RGHO &$@
3-4
Pre-d riving checks andadjustments
L OCKING WITHINSIDE LOCK KNOB
GUID-629 A6066-531D -4132-A558-183B789AC 274
JVP0057X
CAUTION:
When locking thedoors usingtheinside lock
knob, besure nottoleave thekey inthe vehicle.
T o lock thefront doors, pushtheinside lockknob to
the lock position
*
1
, and then close thedoor while
pulling thedoor handle.
T o lock therear doors, pushtheinside lockknob tothe
lock position
*
1
and then close thedoor.
T o unlock, pulltheinside lockknob tothe unlock
position
*
2
.
L OCKING WITHPOWER DOORLOCK
SWIT CH
GUID-C7EADB 00-4DE8-4897-9B93-C F6FBD217 578
SP A2803
CAUTION:
When locking thedoors usingthepower door
lock switch, besure nottoleave thekey inthe
vehicle.
T o lock thedoors, pushthepower doorlockswitch to
the lock position
*
1
with thedriver's dooropen, then
close thedoor while pulling thedoor handle. Alldoors
including theback doorwilllock.
T o unlock, pushthepower doorlockswitch tothe
unlock position
*
2
.
Lockout protection
GUID-ED 56D328-80 4D-4737-9FE 3-5F8AAC166E06
The power doorlockswitch willnotlock thedoors
under thefollowing conditions:
Model without Intelligent Keysystem:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. When thekey isin the ignition switchandthe
driver's doorisopen.
. When anydoor except forthe driver's dooris
open. Model
withIntelligent Keysystem:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. When theIntelligent Key isleft inside ofthe vehicle
and driver's doorisopen.
VEHICLE SPEEDSENSING DOORLOCK
MECHANISM (ifequipped)
GUID-04 EA80D0-B8C 2-4DA2-8099 -FC1B6CCEFF93
All doors willbelocked automatically whenthevehicle
speed reaches 10km/h (6MPH) .Once thelock has
been unlocked, whiledriving, thevehicle speed
sensing doorlockmechanism willnot lock thedoor
again unless oneofthe following isperformed.
. Opening anydoors.
. Placing theignition switchinthe ªLOCKº position.
T o activate ordeactivate vehiclespeed
sensing doorlockmechanism
GUID-A6B B9DC0-42C7 -4550-8916-039A519AD243
T o activate ordeactivate thedoor lockmechanism,
perform thefollowing procedures.
1. Place theignition switchinthe ªONº position.
2. Within 20seconds, pushandhold thepower door
lock switch tothe ªLOCKº position for5seconds.
3. Thehazard indicator lightwillflash asfollows ifthe
switching operationissuccessful:
. Twice Ðactivated
. Once Ðdeactivated
AUT ODOOR LOCK RELEASING ME-
CHANISM (ifequipped)
GUID-27 B58B1A-D2 30-4263-AC30 -2995F5696A5B
All doors willbeunlocked automatically whenthe
following conditions:
. When theignition switchismoved fromªONº to
ªOFFº position (ModelwithInteligent Key system) .
. When thekey isremoved fromtheignition switch
(Model without Inteligent Key system) .
&RQGLWLRQ


> (GLW   0RGHO &$@
. When theIntelligent Key isleft inside thevehicle
. When theIntelligent Key isnot within the
operational range
. When anydoor isopen ornot closed securely
. When theIntelligent Key battery isdischarged
. When theignition switchisin the ªACCº orªONº
position
SP A2407
. Donot push thedoor handle request switchwith
the Intelligent Key held inyour hand asillustrated.
The close distance tothe door handle willcause
the Intelligent Key system tohave difficulty
recognizing thattheIntelligent Key isoutside the
vehicle.
. After locking thedoors usingthedoor handle
request switch,makesurethatthedoors have
been securely lockedbyoperating thedoor
handles.
. When locking thedoors usingthedoor handle
request switch,makesuretohave theIntelligent
K ey inyour possession beforeoperating thedoor
handle request switchtoprevent theIntelligent
K ey from being leftinthe vehicle.
. Thedoor handle request switchisoperational only
when theIntelligent Key has been detected bythe
Intelligent Key system. .
Donot pull thedoor handle beforepushing the
door handle request switch.Thedoor willbe
unlocked butwillnot open. Release thedoor
handle onceandpullitagain toopen the door.
SP A2710
SP A2545
When youcarry theIntelligent Key with you,youcan
lock orunlock alldoors bypushing thedoor handle
request switch(driver's orfront passenger's)
*
A
or
back doorrequest switch
*
B
within therange of
operation.
When youlock orunlock thedoors oropen theback
door, thehazard indicator willflash andtheoutside
chime willsound asaconfirmation. Fordetails, see
ªHazard indicator andoutside chimeoperationº (P.3- 13)
.
Locking doors
GUID-46 A34B66-C7EC -44ED-B6E4-34709BCF1E B0
1. Push theignition switchtothe ªOFFº position.
2. Carry theIntelligent Key with you.
3. Close alldoors.
4. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or the back doorrequest
switch
*
B
.
5. Alldoors andtheback doorwillbelocked.
6. Operate doorhandles toconfirm thatthedoors
have been securely locked.
Lockout protection:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o prevent theIntelligent Key from being accidentally
locked inthe vehicle, lockoutprotection isequipped
with theIntelligent Key system.
. When theIntelligent Key isleft inthe vehicle and
you trytolock thedoor using thedriver's inside
lock knob aftergetting outofthe vehicle, allthe
doors willunlock automatically andachime will
sound afterthedoor isclosed.
. When thedriver's sidedoor isopen andthe
Intelligent Key isinside thevehicle (including
luggage room),the doors cannot belocked using
the power doorlockswitch.
CAUTION:
The lockout protection maynotfunction under
the following conditions:
. When theIntelligent Keyisplaced ontop of
the instrument panel.
. When theIntelligent Keyisplaced onthe
cargo cover.
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ


> (GLW   0RGHO &$@
3-10
Pre-driving checksandadjustments
. When theIntelligent Keyisplaced insideof
the glove box.
. When theIntelligent Keyisplaced insideof
the door pockets.
. When theIntelligent Keyisplaced insideor
near metallic materials.
The lockout protection mayfunction whenthe
Intelligent Keyisoutside thevehicle butistoo
close tothe vehicle.
Unlocking doors
GUID-4C06 CE36-CA33- 4E53-96FA-D9242916BE3F
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or back doorrequest
switch
*
B
.
3. Alldoors andtheback doorwillbeunlocked.
If adoor handle ispulled whileunlocking thedoors,
that door maynotbeunlocked. Returning thedoor
handle toits original position willunlock thedoor. Ifthe
door does notunlock, afterreturning thedoor handle,
push thedoor handle request switchtounlock the
door.
Automatic relock:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds
after pushing therequest switchwhilethedoors are
locked.
. Opening anydoors.
. Pushing theignition switch.
If during thepreset timeperiod theªUNL OCKº
button onthe Intelligent Key ispushed, alldoors willbe
locked automatically afterthenext preset time.
Opening backdoor
GUID-0CD2 99CD-0286- 4C11-B0AF- 3E552439AB7 7
1. Carry theIntelligent Key .
2. Push theback dooropener switch
*
c
.
3. The back doorwillunlock andopen.
BA TTER YSA VER SYSTEM
GUID-BC8 51CDF-ADC2 -4B42-AAD2-6 DB445A0AC51
When allthe following conditions aremet foraperiod
of time, thebattery saversystem willcutoffthe power
supply toprevent batterydischarge.
. The ignition switchisin the ªACCº position, and
. Alldoors areclosed, and
. The shift lever isin the ªPº (Park) position
(Continuously Variable Transmission models).
W ARNING ANDAUDIBLE REMINDERS
GUID-F1 838F66-C4 36-4050-91 6F-4C2899FC2471
The Intelligent Key system isequipped withafunction
that isdesigned tominimize improper operations ofthe
Intelligent Key and tohelp prevent thevehicle from
being stolen. Achime orbeep sounds insideand
outside thevehicle andawarning lightilluminates or
blinks.
See thetroubleshooting guideonthe next page and
ªW arning/indicator lightsandaudible remindersº (P.2-
11) .
Intelligent Key system warning light:
P position selecting warninglight:
(Continuously
V ariable Transmission models)
CAUTION:
When thechime orbeep sounds orthe warning
light illuminates orblinks, besure tocheck both
the vehicle andtheIntelligent Key.
&RQGLWLRQ


> (GLW   0RGHO &$@
be sure toadjust themagain electrically
before driving.
Manual controltype:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
SP A1829
Fold theoutside rearview mirrorbypushing ittoward
the rear ofthe vehicle.
V ANITY MIRROR (ifequipped)
GUID-3BBC6 6EB-AB23-4A75-833B-95 62E91FEDD 9
SP A2192
T o use thefront vanity mirror, pulldown thesun visor
and pullupthe cover.
GUID-ABB 97913-7F76 -4D46-BF6E-5 E27714E1F2C
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious
accident.
SP A2110
T o apply theparking brake,pulltheparking brakelever
up
*
1
.
T o release theparking brake,firmlydepress andhold
the foot brake pedal. Pullupthe parking brakelever
slightly ,push thebutton
*
2
and lower thelever
completely
*
3
.
Before driving, besure thatthebrake warning lighthas turned
off.
Pre-driving checksandadjustments
3-19
P
ARKING BRAKE
&RQGLWLRQ


> (GLW   0RGHO &$@
MANUAL AIRCONDITIONER
GUID-B9 F02A01-74 43-43F7-84E C-9EEBAFE5 A528
JVH0499X
1. Airintake lever(Outside aircirculation ª
º
/Air recirculation
ª
º)
2. Airflow control dial
3. Fanspeed control
ª
º dial
4. ªA/Cº (AirConditioner) button
5. Temperature controldial
6. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-21) .)
T o turn offthe heater andairconditioner, turnthefan
speed control ª
º dial tothe ªOFFº (0)position.
Controls
GUID-3B92B 3BB-498F-4734-93D4 -D381D317DF19
Outside aircirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow isdrawn fromoutside thevehicle.
Air recirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow iscirculated insidethevehicle. Air
flow control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theairflow control dialtochange theairflow
mode.
Ð Airflows fromthecenter andside
ventilators.
Ð Airflows fromthecenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlets.
Ð Airflows fromthefront defogger andfoot
outlets.
Ð Airflows mainly fromthefront defogger
outlets.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed. A/C
(AirConditioner) operation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
T emperature control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
Heater operation
GUID-ED0 DE5AF-669 2-440D-A937 -F37C2F707C77
Heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe ª
º position for
normal heating.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs outside airtothe side andcenter
ventilators.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
Heater andairconditione r,and audio system
4-7
&RQGLWLRQ


> (GLW   0RGHO &$@
AUT OMA TICAIR CONDITIONER
GUID-EEDAB BD4-5460-4E74-8DA 6-F18F780C 0A98
JVH0053X
* The switch layoutinthe illustration isfor the Left-
Hand Drive(LHD) model. FortheRight-Hand Drive
(RHD) model, theswitch layoutwillbethe opposite.
1. Temperature controlbuttons (driverside)
2. ª
º rear defogger button(SeeªDefogger
switchº (P.2-21) .)
3. ª
º front defogger button
4. Display screen
5. ª
º Air recirculation button
6. ª
º Outside aircirculation button
7. Temperature controlbuttons (passenger side)
8. ªON´OFFº button
9. ªAUT Oºbutton
10. ª
º fan speed control button
11. ªMODEº button
12. ªA/Cº (AirConditioner) button
13. ªDUAL ºzone control ON/OFF button
Automatic operation(AUTO)
GUID-3C17 66E6-9820-4047-AC2F-4 76AFCB48C8B
The AUTOmode maybeused year-round asthe
system automatically controlstheairconditioner toa
constant temperature, airflow distribution andfan
speed afterthedesired temperature isset manually .
T o turn theheater andairconditioner onoroff, push
the ªON´OFFº button.
Cooling anddehumidified heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe A/C indicator lightisnot illuminated, push
the ªA/Cº button (theA/C indicator lightwill
illuminate) .
3. Push thetemperature controlbuttons
(ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to independently
changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
4. Push either theoutside aircirculation ª
º
button orthe airrecirculation ª
º button (the
button withanindicator lightilluminated) for
approximately 2seconds toswitch tothe auto-
matic airintake control mode(theindicator light
will blink twice) .
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Heating (A/Coff):
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe ªA/C indicator lightisilluminated, pushthe
ª A/Cº button (theA/C indicator lightwillturn off).
3. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to
independently changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
Heater andairconditione r,and audio system
4-9
&RQGLWLRQ


> (GLW   0RGHO &$@
4-10
Heater andairconditione r,and audio system
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
. Donot setthe temperature lowerthantheoutside
air temperature. Doingsomay cause thetem-
perature tonot becontrolled properly.
. Ifthe windows fogup,use dehumidified heating
instead ofthe A/C offheating.
Dehumidified defrosting/defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push thefront defogger ª
º button (theª
º
indicator lightwillilluminate) .
2. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
. To quickly remove frostfromtheoutside surfaceof
the windshield, setthe temperature controland
the fanspeed tothe maximum levels.
. After thewindshield iscleared, pushtheªAUT Oº
button again(theAUTOindicator lightwillturn
off) .
. When thefront defogger ª
º button ispushed,
the airconditioner willautomatically turnonto
defog thewindshield ifthe outside temperature is
above -28C. Ifthe airrecirculation modeisturned
on atthe time, theventilation willchange fromthe
air recirculation modetothe outside aircirculation
mode toimprove thedefogging performance.
Do not setthe temperature toolow when thefront
defogger modeison (the ª
º indicator lightis
illuminated) ,because doingsomay fogupthe
windshield.
Manual operation
GUID-729 4676B-E04 5-4948-935 6-7E8823822C9D
The manual modecanbeused tocontrol theheater
and airconditioner toyour desired settings.
T o turn offthe heater andairconditioner, pushthe
ªON´OFFº button.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push thefanspeed control ª
º button (+ side or


> (GLW   0RGHO &$@
4-12
Heater andairconditione r,and audio system
. Ifthe CD cannot beplayed, oneofthe following
messages willbedisplayed.
Error CD:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. Confirm thattheCD isinserted correctly (thelabel
side isfacing up,etc.) .
. Confirm thattheCD isnot bent orwarped anditis
free ofscratches.
. Confirm thatthedisc isaCD and notaDVD.
. Confirm thatthedisc contains audiofiles.
Eject CD:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This isamalfunction duetothe temperature insidethe
player istoo high. Remove theCD bypushing the
EJECT button, andafter ashort timereinsert theCD.
The CDcan beplayed whenthetemperature ofthe
player returns tonormal.
WARNING:
Do not adjust theaudio system whiledriving.
The audio system operates whentheignition switchis
in the ªACCº orªONº position. Ifyou want tolisten to
the radio orCD while theengine isnot running, turn
the ignition switchtothe ªACCº position. Donot use
for anextended periodoftime withtheengine
stopped.
USB (Universal SerialBus)(ifequipped)
GUID-C92 63E7B-31BF -4CE4-BACA -6A31CCA69 271
WARNING:
Do not connect, disconnect oroperate theUSB
device whiledriving. Doingsocan beadistrac-
tion. Ifdistracted youcould losecontrol ofyour
vehicle andcause anaccident orserious injury.
CAUTION:
. Donot force theUSB device intotheUSB
port. Inserting theUSB device tiltedorup-
side-down intotheport may damage the
port. Make surethattheUSB device is
connected correctlyintotheUSB port.
. Donot grab theUSB portcover (ifequipped)
when pulling theUSB device outofthe port.
This could damage theport andthecover.
. Donot leave theUSB cable inaplace where
it can bepulled unintentionally. Pullingthe
cable maydamage theport.
The vehicle isnot equipped withaUSB device. USB
devices shouldbepurchased separatelyasnecessary .
This system cannotbeused toformat USBdevices. To
format aUSB device, useapersonal computer.
In some states/area, theUSB device forthe front seats
plays onlysound without imagesforregulatory
reasons, evenwhen thevehicle isparked.
This system supports variousUSBmemory devices,
USB harddrives andiPod players. SomeUSBdevices
may notbesupported bythis system.
. Partitioned USBdevices maynotbeplayed
correctly .
. Some characters usedinother languages (Chi-
nese, Japanese, etc.)arenot displayed properly
on display .Using English language characters
with aUSB device isrecommended.
General notesforUSB use:
Refer toyour device manufacturer's ownerinformation
regarding theproper useand care ofthe device. Notes
foriPod use:
iP od isatrademark ofApple Inc.,registered inthe U.S.
and other countries.
. Improperly plugginginthe iPod may cause a
checkmark tobe displayed onand off(flickering) .
Always makesurethattheiPod isconnected
properly .
. AniPod nano (1stGeneration) mayremain infast
forward orrewind modeifit is connected duringa
seek operation. Inthis case, please manually reset
the iPod.
. AniPod nano (2ndGeneration) willcontinue to
fast-forward orrewind ifit is disconnected during
a seek operation.
. Anincorrect songtitlemay appear whenthePlay
Mode ischanged whileusing aniPod nano (2nd
Generation)
. Audiobooks maynotplay inthe same orderas
they appear onaniPo d.
. Large videofilescause slowresponses inan iPod.
The vehicle centerdisplay maymomentarily black
out, butwillsoon recover.
. Ifan iPodautomatically selectslargevideo files
while inthe shuffle mode,thevehicle center
display maymomentarily blackout,butwillsoon
recover.
Compact Disc/USB memorywithMP3 or
WMA (ifequipped)
GUID-CD9 6BDCB-91C E-4EBD-989E-265CB8B6578E
T erms:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. MP3 ÐMP3 isshort forMoving Pictures Experts
Group AudioLayer3.MP3 isthe most wellknown
compressed digitalaudiofileformat. Thisformat
allows fornear ªCDqualityº sound,butata
fraction ofthe size ofnormal audiofiles.MP3
conversion ofan audio trackfromCDcan reduce
&RQGLWLRQ

 
> (GLW   0RGHO &$@
Audio mainoperation
GUID-1AAF6 8DA-BD5F-49DD-BB10-110C903AE ED1
Head unit:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The auto loudness circuitenhances thelow and high
frequency rangesautomatically inboth radio reception
and CDplayback.
PWR/V olumecontrol:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Place theignition switchinthe ACC orON position,
and then push thePWR button whilethesystem isoff
to turn onthe last audio source, whichwasplaying
immediately beforethesystem wasturned off.While
the system ison, pushing thePWR button turnsthe
system off.
T urn theVOL control knobtoadjust thevolume.
SETTING:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The settings screenwillappear whenpushing the
ENTER/SETTING button.
The following itemsareavailable inthe settings screen.
. Bass, Treble, Balance andFade
Controls thesound ofthe audio system. Balance
adjusts thesound between theleftand right
speakers. Fadeadjusts thesound between the
front andrear speakers.
Select theªBassº ,ªT rebleº ,ªBalanceº orªFadeº
using theTUNE´FOLDER controlknobandthen
push theENTER/SETTING button.Turn the
TUNE´FOLDER controlknobtoadjust theBass,
T reble, balance andFade ofthe screen tothe
preferred level.
. Speed SensVol.
T o change theSpeed Sensitive Volume (Speed
Sens Vol.) level fromoff(0) to5,turn the
TUNE´FOLDER controlknob. .
AUX Vol.
Controls thevolume levelofincoming soundwhen
an auxiliary deviceisconnected tothe system.
Choose asetting between 1and 3or choose 0to
disable thefeature entirely.
. Brightness andContrast
Adjust thebrightness andcontrast ofthe screen.
Select theªbrightnessº orªcontrastº usingthe
TUNE´FOLDER controlknobandthen push the
ENTER/SETTING button.Turn theTUNE´FOLDER
control knobtoadjust thebrightness andcontrast
of the screen tothe preferred level.
. Clock Adjust
Adjust theclock according tothe following procedure.
JVH0306X
1) Select ªClock Adjustº usingtheTUNE´-
FOLDER controlknob
*
1
and then push
the ENTER/SETTING button
*
2
.
2) Adjust thehour withtheTUNE´FOLDER
control knob
*
1
and then push theENTER/
SETTING button
*
2
.
3) Adjust theminute withtheTUNE´FOLDER
control knob
*
1
and then push theENTER/
SETTING button
*
2
. 24
hour clock isnot available.
. On-Screen Clock
When thisitem isturned on,aclock isalways
displayed inthe upper rightcorner ofthe screen.
Select theªOn-Screen ClockºusingtheTUNE´-
FOLDER controlknobandthen push theENTER/
SETTING button.You can toggle between ON
and OFF using theTUNE´FOLDER controlknob.
. RDS Display (ifequipped)
RDS (radio datasystem) information canbe
shown onthe display .Select ªRDSDisplayº using
the TUNE´FOLDER controlknobandthen push
the ENTER/SETTING button.You can toggle
between ONand OFF using theTUNE´FOLDER
control knob.
. iPod Menu language
The iPod menu language canbechanged.
Select ªiPod menu languageº usingtheTUNE´-
FOLDER controlknobandthen push theENTER/
SETTING button.UsetheTUNE´FOLDER control
knob toselect thepreferred language.
DISP:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Display ofthe screen canbecanceled bypushing the
DISP button. You can then listen tomusic thatisbeing
played back.Ifyou want todisplay thescreen again,
either pushtheDISP button oncemore orpush the
FM´AM orAUX button.
AUX INjack:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The AUX INjack islocated onthe audio unit.TheAUX
IN audio inputjackaccepts anystandard analogaudio
input suchasfrom aportable cassette tape/CD player,
MP3 player orlaptop computer.
NISSAN stronglyrecommends usingastereo mini
plug cable whenconnecting yourmusic device tothe
Heater andairconditioner ,and audio system
4-23
&RQGLWLRQ