warning light NISSAN PULSAR 2017 Owner's Guide


> (GLW   0RGHO &$@
. Push fourtimes toreturn toªACCº .
. Open orclose anydoor toreturn toªLOCKº when
in the ªOFFº position.
The indicator light
*
A
on the ignition switchillumi-
nates whentheignition switchisin the ªACCº orªONº
position.
L OCK position
GUID-43425B BE-7F00-4ED4-A87 5-071702F2 842A
The ignition switchandsteering lockcanonly be
locked atthis position.
The ignition switchwillbeunlocked whenitis pushed
to the ªACCº position whilecarrying theIntelligent Key .
ACC position
GUID-202F5 141-00BE-47DC-B76C-7 268FE6DC636
The electrical accessory poweractivates atthis
position withouttheengine turnedon.
ON position
GUID-9FF5 AE68-135D-4 D67-8BBC-43E8DC881 23E
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
OFF position
GUID-81EA9 526-2AC3-4FF2-91B3 -F3E0BFFFA02D
The engine isturned offwith thesteering wheel
unlocked.
WARNING:
Never pushtheignition switchtothe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
Do not leave thevehicle forextended periodsof
time when theignition switchisin the ªACCº or
ªONº position andtheengine isnot running. This
candischarge thebattery.
INTELLIGENT KEYBATTER YDISCHARGE
GUID-EC7 BC919-57B A-4B13-9C48-52E166 3770CA
SSD0860
If the battery ofthe Intelligent Key isdischarged, or
environmental conditionsinterferewiththeIntelligent
K ey operation, starttheengine according tothe
following procedure:
1. Continuously Variable Transmission (CVT)
model:
Move theshift lever tothe ªPº (Park) orªNº
(Neutral) position.
Manual Transmission (MT)model:
Move theshift lever tothe ªNº (Neutral) position.
2. Firmly depress thebrake pedal.
3. Touch theignition switchwiththeIntelligent Key
as illustrated. (Achime willsound.)
4. Push theignition switchwhiledepressing the
brake pedal (Continuously Variable Transmission
models) orclutch pedal(Manual Transmission
models) within10seconds afterthechime
sounds. Theengine willstart.
After step3is performed, whentheignition switchis
pushed withoutdepressing thebrake pedal (Con-
tinuously Variable Transmission models)orclutch pedal
(Manual Transmission models),the ignition
switch position willchange toªACCº .
NO TE:
. When theignition switchispushed tothe
ª ACCº orªONº position orthe engine is
started bythe above procedures, theIntel-
ligent Keysystem warning lightmayblink in
yellow evenifthe Intelligent Keyisinside
the vehicle. Thisisnot amalfunction. To stop
the warning lightfrom blinking, touchthe
ignition switchwiththeIntelligent Key
again.
. Ifthe Intelligent Keysystem warning lightin
the meter isblinking ingreen, replace the
battery assoon aspossible. (SeeªBatteryº
(P .8-18) .)
Starting anddriving
5-7
&RQGLWLRQ


> (GLW   0RGHO &$@
5-10
Starting anddriving
slowly whentheengine isrunning. Make
sure thefoot brake pedalisdepressed fully
and thevehicle isstopped beforeshifting
the shift lever.
. MAKE SUREOFTHE SHIFT LEVER POSI-
TION -Make suretheshift lever isin the
desired position. ªDºand ªLºor manual shift
mode areused tomove forward andªRºto
back up.
. WARM UPTHE ENGINE -Due tothe higher
idle speeds whentheengine iscold, extra
caution mustbeexercised whenshifting the
shift lever intothedriving position immedi-
ately afterstarting theengine.
Shifting
GUID-22528B F3-29D9-403E-AE79-B EA15D2F63 FE
JVS0199X
With manual shiftmode (RHD model)
JVO0030X
Without manualshiftmode (LHD model)

Push thebutton
*
A
while depressing the
foot brake
pedal.

Push thebutton
*
A
.

Just move theshift lever.
WARNING:
. Apply theparking brakeifthe shift lever isin
any position whiletheengine isnot running.
Failure todo socould cause thevehicle to
move unexpectedly orroll away andresult in
serious personal injuryorproperty damage.
. Ifthe shift lever cannot bemoved fromthe
ªPº (Park) position whiletheengine is
running andthefoot brake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause an
accident injuringyourself andothers.
After starting theengine, fullydepress thefoot brake
pedal, pushtheshift lever button andmove theshift
lever outofthe ªPº (Park) position.
If the ignition switchisplaced inthe ªOFFº orªACCº
position forany reason whiletheshift lever isin any positions
otherthantheªPº (Park) position, theignition
switch cannot beplaced inthe ªLOCKº position.
If the ignition switchcannot beplaced inthe ªLOCKº
position, performthefollowing steps:
1. Apply theparking brake.
2. Place theignition switchinthe ªONº position
while depressing thefoot brake pedal.
3. Move theshift lever tothe ªPº (Park) position.
4. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position.
P (Park) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition whenthevehicle isparked orwhen
starting theengine. Makesurethatthevehicle is
completely stoppedandmove theshift lever into
the ªPº(Park) position. Applytheparking brake.
When parking onahill, first depress thefoot brake
pedal, applytheparking brake,andthen move theshift
lever intotheªPº (Park) position.
R (Reverse) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition toback up.Make surethatthevehicle
is completely stoppedbeforeselecting theªRº
(Reverse) position.
N (Neutral) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Neither theforward norreverse gearisengaged. The
engine canbestarted inthis position. You may shift to
the ªNº (Neutral) positionandrestart astalled engine
while thevehicle ismoving.
&RQGLWLRQ


> (GLW   0RGHO &$@
5-12
Starting anddriving
turn theSPORT modeoff.
Remember nottodrive athigh speeds forextended
periods oftime withtheSPORT modeinthe ªONº
position. Thisreduces fueleconomy .
Accelerator downshift-in the ªDº position -
GUID-FE4ECF FF-36B2-40BE-8768- DFB973246 910
For passing orclimbing hills,depress theaccelerator
pedal tothe floor. Thisshifts thetransmission down
into alower gear,depending onthe vehicle speed.
Shift lockrelease
GUID-7F 9F39D1-C CBB-4C10-9 90D-C12C1B 7B40EB
JVO0027X
Without manualshiftmode (LHDmodel)
If the battery charge islow ordischarged, theshift
lever maynotbemoved fromtheªPº (Park) position
even withthebrake pedal depressed andtheshift lever
button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº orªLOCKº
position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position,
and remove thekey ifit is inserted. 2.
Apply theparking brake.
3. Push theshift lever button andmove theshift lever
to the ªNº (Neutral) positionwhileholding down
the shift lockrelease.
Place theignition switchinthe ªONº position tounlock
the steering wheel.Thevehicle maybemoved tothe
desired location.
For model withIntelligent Key system: Ifthe battery is
discharged completely,the steering wheelcannot be
unlocked. Donot move thevehicle withthesteering
wheel locked.
If the shift lever cannot bemoved outofthe ªPº (Park)
position, haveaNISSAN dealerchecktheCVT system
as soon aspossible.
WARNING:
If the shift lever cannot bemoved fromtheªPº
(Park) position whiletheengine isrunning and
the brake pedalisdepressed, thestop lights
may notwork. Malfunctioning stoplights could
cause anaccident injuringyourself andothers.
High fluidtemperature protectionmode
GUID-92F6 203D-4431 -412E-BD73-BE0106E 26143
This transmission hasahigh fluidtemperature protec-
tion mode. Ifthe fluid temperature becomestoohigh
(for example, whenclimbing steepgrades inhigh
temperature withheavy loads, suchaswhen towing a
trailer) ,engine powerand,under someconditions,
vehicle speedwillbedecreased automatically to
reduce thechance oftransmission damage.Vehicle
speed canbecontrolled withtheaccelerator pedal,
but engine andvehicle speedmaybelimited.
Fail-safe
GUID-4C5CA0 11-BE46-48EA-A16F-D6 F3A9BF72B8
When thefail-safe operation occurs,theCVT willnot
be shifted tothe selected drivingposition.
If the vehicle isdriven underextreme conditions,
such asexcessive wheelspinning andsubse-
quent hardbraking, thefail-safe systemmaybe
activated. Thiswilloccur evenifall electrical
circuits arefunctioning properly.Inthis case,
place theignition switchinthe ªOFFº position
and wait for10seconds. Thenturntheignition
switch backtothe ªONº position. Thevehicle
should returntoits normal operating condition.
If itdoes notreturn toits normal operating
condition, haveaNISSAN dealercheckthe
transmission andrepair itifnecessary.
WARNING:
When thefail-safe operation occurs,vehicle
speed maybegradually reduced.Thereduced
speed maybelower thanother traffic,which
could increase thechance ofacollision. Be
especially carefulwhendriving. Ifnecessary, pull
to the side ofthe road atasafe place andallow
the transmission toreturn tonormal operation,
or have itrepaired ifnecessary.
&RQGLWLRQ


> (GLW   0RGHO &$@
DRIVING WITHMANUAL TRANSMISSION
(MT)
GUID-08 EE8EF5-22C A-45AE-97E1-FC6FB2E7 A861
WARNING:
. Donot downshift abruptlyonslippery roads.
This maycause aloss ofvehicle control.
. Donot over-rev theengine whenshifting to
a lower gear.Thismay cause aloss of
vehicle control orengine damage.
CAUTION:
. Donot rest your footonthe clutch pedal
while driving. Thismay damage theclutch
system.
. Fully depress theclutch pedalbefore shift-
ing tohelp prevent transmission damage.
. Stop thevehicle completely beforeshifting
into theªRº(Reverse) position.
. When thevehicle isstopped foraperiod of
time, forexample waitingatstoplights, shift
to the ªNº (Neutral) positionandrelease the
clutch pedalwiththefoot brake pedal
depressed.
. Do not shift tothe ªNº (Neutral) position
while driving. Doingsomay result inan
accident duetoloss ofengine braking.
Starting vehicle
GUID-167 57328-65F A-4660-BD9B-5E4335 1F3AF1
1. After starting theengine, depress theclutch pedal
to the floor andmove theshift lever tothe ª1º(1st)
or ªRº (Reverse) position.
2. Slowly depress theaccelerator pedal,releasing
the clutch pedalandparking brakeatthe same
time.
Shifting gear
GUID-70 8BE0C7-A6C5 -48DA-A9C3-3AD53F8A3 232
T o change gears,orwhen upshifting ordownshifting,
fully depress theclutch pedal, shiftintotheappropriate
gear, thenslowly andsmoothly releasetheclutch
pedal.
T o ensure smooth gearchanges, fullydepress the
clutch pedalbefore operating theshift lever. Ifthe
clutch pedalisnot fully depressed beforethe
transmission isshifted, agear noise maybeheard.
T ransmission damagecouldoccur.
Start thevehicle inthe ª1º(1st) position andshift to
the ª2º(2nd) ,ª3º (3rd) ,ª4º (4th) ,ª5º (5th) andª6º
(6th) (ifequipped) gearinsequence according tothe
vehicle speed.
If itis difficult tomove theshift lever intotheªRº
(Reverse) orª1º (1st) position, shifttothe ªNº (Neutral)
position, andthen release theclutch pedalonce.Fully
depress theclutch pedalagainandshift intoªRºorª1º
.
SSD0084
5-speed ManualTransmission (MT)model:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Y ou cannot shiftdirectly fromtheª5º (5th) position into
the R(Reverse) position.FirstshiftintotheN(Neutral)
position, thenshiftintotheR(Reverse)
position.
SSD0552
6-speed ManualTransmission (MT)model:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. To reverse, stopthevehicle andmove theshift
lever intotheN(Neutral) position,andthen pull
the ring
*
1
upward toshift intotheR(Reverse)
position.
. The ring returns toits original position whenthe
shift lever ismoved tothe N(Neutral) position.
Starting anddriving
5-13
&RQGLWLRQ


> (GLW   0RGHO &$@
5-14
Starting anddriving
Suggested maximumspeedineach gear
GUID-11 EBED13-E7 31-4C5E-A8 5D-AC41FFF83620
Downshift toalower gearifthe engine isnot running
smoothly ,or ifyou need toaccelerate.
Do not exceed themaximum suggested speed(shown
below) inany gear. Forlevel road driving, usethe
highest gearsuggested forthat speed. Always observe
posted speedlimits,anddrive according tothe road
conditions whichwillensure safeoperation. Donot
over-rev theengine whenshifting toalower gearasit
may cause engine damage orloss ofvehicle control.
5-speed ManualTransmission (MT)model:
HR16DE enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 45(28)
2nd 83(51)
3rd 121(75)
4th 164(102)
5th Ð(Ð)
6-speed ManualTransmission (MT)model:
MRA8DE enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 47(29)
2nd 84(52)
3rd 117(72)
4th 152(94)
5th Ð(Ð)
6th Ð(Ð) MR16DDT
enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 49(30)
2nd 85(53)
3rd 119(74)
4th 149(92)
5th 182(113)
6th Ð(Ð)
GUID-664 D8AFF-261B -4944-B0D6-F 0B3F5767B92
WARNING:
. The Vehicle Dynamic Control(VDC)system
is designed tohelp thedriver maintain
stability butdoes notprevent accidents
due toabrupt steering operation athigh
speeds orby careless ordangerous driving
techniques. Reducevehiclespeedandbe
especially carefulwhendriving andcorner-
ing onslippery surfaces andalways drive
carefully.
. Donot modify thevehicle's suspension. If
suspension partssuchasshock absorbers,
struts, springs, stabilizer bars,bushings and
wheels arenot NISSAN recommended for
your vehicle orare extremely deteriorated,
the VDC system maynotoperate properly.
This could adversely affectvehicle handling
performance, andtheVDC warning light
may illuminate.
. Ifbrake related partssuchasbrake pads,
rotors andcalipers arenot NISSAN recom-
mended orare extremely deteriorated, the
VDC system maynotoperate properly and
the VDC warning light
may illuminate.
. Ifengine control related partsarenot
NISSAN recommended orare extremely
deteriorated, theVDC warning light
may illuminate.
. When driving onextremely inclinedsurfaces
such ashigher banked corners, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate. Do
not drive onthese typesofroads.
. When driving onanunstable surfacesuchas
a turntable, ferry,elevator orramp, theVDC
VEHICLE DYNAMIC CONTROL (VDC)
S Y STEM (ifequipped)
&RQGLWLRQ


> (GLW   0RGHO &$@
warning light
may illuminate. Thisisnot
a malfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate.
. The VDC system isnot asubstitute forwinter
tires ortire chains onasnow covered road.
The Vehicle Dynamic Control(VDC)system uses
various sensors tomonitor driverinputs andvehicle
motion. Undercertain drivingconditions, theVDC
system helpstoperform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC system canhelp thedriver tomaintain control
of the vehicle, butitcannot prevent lossofvehicle
control inall driving situations.
When theVDC system operates, theVDC warning
light
in the instrument panelflashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path. .
You may feelapulsation inthe brake pedaland
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC system is
working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If amalfunction occursinthe system, theVDC warning
light
illuminates inthe instrument panel.TheVDC
system automatically turnsoff.
The VDC OFFswitch isused toturn offthe VDC
system. TheVDC offindicator light
illuminates to
indicate theVDC system isoff. When theVDC OFF
switch isused toturn offthe system, theVDC system
still operates toprevent onedrive wheel fromslipping
by transferring powertoanon slipping drivewheel.
The VDC warning light
flashes ifthis occurs. All
other VDCfunctions areoffand theVDC warning light
will not flash. TheVDC system isautomatically
reset toon when theignition switchisplaced inthe
ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning lightº
(P .2-14) andªVehicle Dynamic Control(VDC)off
indicator lightº(P.2-16) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº
noise and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)OFF
SWIT CH
GUID-A9257 017-A8BE-40D0-9E2E-32 15E14F5 026
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC
system reduces theengine outputtoreduce wheel
spin. Theengine speedwillbereduced evenifthe
accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC system off.
T o turn offthe VDC system, pushtheVDC OFFswitch.
The
indicator lightwillilluminate.
Push theVDC OFFswitch againorrestart theengine
to turn ONthesystem.
Starting anddriving
5-15
&RQGLWLRQ


> (GLW   0RGHO &$@
5-16
Starting anddriving
GUID-D9A2 662F-4922-4 5F1-98FB-77EC7CFF7 173
SSD0694
1. RESUME/ACCELERA TEswitch
2. SET/COAST switch
3. CANCEL switch
4. Cruise control MAINswitch
WARNING:
. Always observe theposted speedlimitsand
do not setthe speed overthem.
. Donot use thecruise control whendriving
under thefollowing conditions. Doingso
could cause aloss ofvehicle control and
result inan accident.
Ð When itis not possible tokeep the
vehicle ataconstant speed
Ð When driving inheavy traffic
Ð When driving intraffic thatvaries speed
Ð When driving inwindy areas
Ð When driving onwinding orhilly roads
Ð When driving onslippery (rain,snow, ice,
etc .)roads
CAUTION:
On manual Transmission (MT)model, donot
shift tothe ªNº (Neutral) positionwithout
depressing theclutch pedalwhenthecruise
control isoperated. Shouldthisoccur, depress
the clutch pedalandturn thecruise control MAIN
switch offimmediately. Failuretodo somay
cause engine damage.
PRECAUTIONS ONCRUISE CONTROL
GUID-F50E3 DC7-859C-46F8-BC38-59BFA63C6C9 0
. Ifthe cruise control system malfunctions, itwill
cancel automatically .The CRUISE indicator light
on the meter panelwillthen blink towarn the
driver.
. Ifthe engine coolant temperature becomes
excessively high,thecruise control system will
cancel automatically .
. Ifthe CRUISE indicator lightblinks, turnthecruise
control MAINswitch offand have thesystem
checked byaNISSAN dealer.
. The CRUISE indicator lightmayblink when the
cruise control MAINswitch isturned ONwhile
pushing theRESUME/ACCELERA TE,SET/
COAST orCANCEL switch.To properly setthe
cruise control system, perform thefollowing
procedures.
CRUISE CONTROL OPERATIONS
GUID-738 F3BB0-3C2E-4 375-95D7-54DD457F2 984
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
The cruise control willautomatically becanceled ifthe
vehicle slowsdownmorethanapproximately 13km/h
(8 MPH) below thesetspeed.
Moving theshift lever tothe ªNº (Neutral) position
(Continuously Variable Transmission model)ordepres-
sing theclutch pedal(Manual Transmission model)will
cancel thecruise control andtheCRUISE indicator
light willturn off.
T urning oncruise control
GUID-5EE 83BAE-9DA 6-4DFF-97D 2-23EA9F05 B504
Push thecruise control MAINswitch. TheCRUISE
indicator lightilluminates.
Setting cruising speed
GUID-A62E 93CF-7746-4F51-9653-7 4B5844CB6C7
1. Accelerate tothe desired speed.
2. Push theSET/COAST switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control.
CRUISE CONTROL (ifequippe d)
&RQGLWLRQ


> (GLW   0RGHO &$@
Resetting toslower speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use anyone ofthe following methodstoreset toa
slower speed.
. Lightly tapthefoot brake pedal. When thevehicle
reaches thedesired speed,pushandrelease the
SET/COAST switch.
. Push andhold theSET/COAST switch.Whenthe
vehicle reaches thedesired speed,release the
SET/COAST switch.
. Quickly pushandrelease theSET/COAST switch.
This willreduce thevehicle speedbyabout 1km/h
(0.6 MPH) .
Resetting tofaster speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use anyone ofthe following methodstoreset toa
faster speed.
. Depress theaccelerator pedal.Whenthevehicle
reaches thedesired speed,pushandrelease the
SET/COAST switch.
. Push andhold theRESUME/ACCELERA TE
switch. Whenthevehicle reaches thedesired
speed, release theRESUME/ACCELERA TE
switch.
. Quickly pushandrelease theRESUME/ACCEL -
ERA TEswitch. Thiswillincrease thevehicle speed
by about 1km/h (0.6MPH) .
Resuming atpreset speed:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push andrelease theRESUME/ACCELERA TEswitch.
The vehicle willresume thelast setcruising speed
when thevehicle speedisover 40km/h (25MPH) .
Canceling cruisingspeed
GUID-DDC B3479-7AFA-43FE-8B66-1815 17721EEC
Use anyone ofthe following methodstocancel theset
speed.
. Push theCANCEL switch.
. Tap the foot brake pedal.
. Push thecruise control MAINswitch. TheCRUISE
indicator lightturns off.
GUID-63C 20373-823 7-4559-8ED 1-DFC76D027C63
WARNING:
. Do not stop orpark thevehicle over
flammable materialssuchasdry grass,
waste paperorrags. Theymayignite and
cause afire.
. Safe parking procedures requirethatboth
the parking brakebeapplied andtheshift
lever placed inthe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever placed inan appropriate
gear (Manual Transmission model).Failure
to do socould cause thevehicle tomove
unexpectedly orroll away andresult inan
accident.
. When parking thevehicle, makesurethe
shift lever ismoved tothe ªPº(Park)
position. Theshift lever cannot bemoved
out ofthe ªPº(Park) position without
depressing thefoot brake pedal(CVTmod-
el) .
. Never leavetheengine running whilethe
vehicle isunattended.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalillness topeople and
animals.
Starting anddriving
5-17
P
ARKING
&RQGLWLRQ


> (GLW   0RGHO &$@
5-22
Starting anddriving
GUID-EA B6A8C3- C092-41F6 -A582-7BF8 3E12921F
WARNING:
. Ifthe engine isnot running oristurned off
while driving, thepower assistforthe
steering willnotwork. Thesteering willbe
much harder tooperate.
. When theelectric powersteering warning
light illuminates withtheengine running, the
power assistforthe steering willcease
operation. You will still have control ofthe
vehicle butthesteering willbeharder to
operate.
The electric powersteering systemisdesigned to
provide powerassistwhiledriving tooperate the
steering wheelwithlight force.
When thesteering wheelisoperated repeatedly or
continuously whileparking ordriving atavery low
speed, thepower assistforthe steering wheelwillbe
reduced. Thisisto prevent overheating ofthe electric
power steering systemandprotect itfrom getting
damaged. Whilethepower assistisreduced, steering
wheel operation willbecome heavy.When the
temperature ofthe electric powersteering system
goes down, thepower assistlevelwillreturn tonormal.
Avoid repeating suchsteering wheeloperations that
could cause theelectric powersteering systemto
overheat.
Y ou may hear africative soundwhenthesteering
wheel isoperated quickly.However, thisisnot a
malfunction.
If the electric powersteering warninglight
illuminates whiletheengine isrunning, itmay indicate
the electric powersteering systemisnot functioning
properly andmay need servicing. Havetheelectric
power steering systemchecked byaNISSAN dealer.
(See ªElectric powersteering warninglightº(P.2-13) .)When
theelectric powersteering warninglight
illuminates withtheengine running, thepower assist
for the steering willcease operation. You will still have
control ofthe vehicle. However, greatersteering effort
is needed, especially insharp turnsandatlow speeds.
GUID-52 4F2163-875B -4D31-9A49-A2DA9D 150D31
The brake system hastwo separate hydraulic circuits.If
one circuit malfunctions, youwillstill have braking
ability attwo wheels.
BRAKE PRECAUTIONS
GUID-99 5F14BA-32 50-45E8-A4D 5-EFBD0B632895
V acuum assisted brakes
GUID-7AE 8E208-0576-4 BD2-8C93-C8FFF26A62C6
The brake booster aidsbraking byusing engine
vacuum. Ifthe engine stops,youcan stop thevehicle
by depressing thefoot brake pedal. However, greater
foot pressure onthe foot brake pedalwillberequired
to stop thevehicle. Thestopping distancewillbe
longer.
If the engine isnot running oristurned offwhile driving,
the power assisted brakeswillnot function. Braking
will beharder.
WARNING:
Do not coast withtheengine stopped.
For model withBrake Assist: Whenthebrake pedalis
depressed slowlyandfirmly ,you may hear aclicking
noise andfeelaslight pulsation. Thisisnormal and
indicates thattheBrake Assist System isoperating.
Using brakes
GUID-B3E 7B0F5-C532-4 3D1-8150-97FB7B385 CFC
Avoid resting yourfootonthe foot brake pedalwhile
driving. Thiswilloverheat thebrakes, wearoutthe
brake linings/pads faster,andincrease fuelconsump-
tion.
T o help reduce brakewearandtoprevent thebrakes
from overheating, reducespeedanddownshift toa
lower gearbefore goingdownaslope orlong grade.
Overheated brakesmayreduce braking performance
and could resultinloss ofvehicle control.
While driving onaslippery surface, becareful when
braking, accelerating ordownshifting. Abruptbraking
ELECTRIC POWERSTEERING
S Y STEM BRAKE
SY STEM
&RQGLWLRQ


> (GLW   0RGHO &$@
or acceleration couldcause thewheels toskid and
result inan accident.
W et brakes
GUID-113 04DAE-D8A 1-41C5-9629 -EB4E233FA326
When thevehicle iswashed ordriven through water,
the brakes maygetwet. Asaresult, yourbraking
distance willbelonger andthevehicle maypulltoone
side during braking.
T o dry the brakes, drivethevehicle atasafe speed
while lightly depressing thefoot brake pedal toheat up
the brakes. Dothis until thebrakes returntonormal.
Avoid driving thevehicle athigh speeds untilthe
brakes function correctly.
Parking brakebreak-in
GUID-9F 650418-11 53-4519-A06 7-F7B1AB1F0389
Break inthe parking brakeshoes whenever the
stopping effectofthe parking brakeisweakened or
whenever theparking brakeshoes and/or drums/rotors
are replaced, inorder toassure thebest braking
performance.
This procedure isdescribed inthe vehicle service
manual andcanbeperformed byaNISSAN dealer.
Driving uphill
GUID-98F5 E8C2-2DFE-4 585-B8B6-542F87613 B7A
When starting onasteep grade, itis sometimes
difficult tooperate boththebrake andclutch (for
Manual Transmission model).Apply theparking brake
to hold thevehicle. Donot slip theclutch. Whenready
to start, slowly release theparking brakewhile
depressing theaccelerator pedalandreleasing the
clutch pedal.
Driving downhill
GUID-32139F 93-F218-4D2C-BC4E-B 0CC3241F2E9
The engine braking actioniseffective forcontrolling
the vehicle whiledescending hills.ForManual Trans-
mission (MT)model, theshift lever should beplaced in
the lower speed position priortodescending.For
Continuously Variable Transmission (CVT)model, the
manual shiftmode orthe ªLº position shouldbe
selected.
BRAKE ASSIST (ifequipped)
GUID-CDB FBD03-A9DF-438C-AF 95-F32FB9DAFFB2
When theforce applied tothe brake pedalexceeds a
certain level,theBrake Assist isactivated generating
greater braking forcethanaconventional brake
booster evenwithlight pedal force.
WARNING:
The Brake Assist isonly anaid toassist braking
operation andisnot acollision warningor
avoidance device.Itis the driver's responsibility
to stay alert, drivesafely andbeincontrol ofthe
vehicle atall times.
ANTI-L OCKBRAKING SYSTEM (ABS) (if
equipped)
GUID-C5C2B DDA-1861-49E4-A3EF -B800D31DBF5F
WARNING:
. The Anti-lock BrakingSystem(ABS)isa
sophisticated device,butitcannot prevent
accidents resultingfromcareless ordanger-
ous driving techniques. Itcan help maintain
vehicle control duringbraking onslippery
surfaces. Remember thatstopping distances
on slippery surfaces willbelonger thanon
normal surfaces evenwithABS. Stopping
distances mayalso belonger onrough,
gravel orsnow covered roads,orifyou are using
tirechains. Always maintain asafe
distance fromthevehicle infront ofyou.
Ultimately, thedriver isresponsible for
safety.
. Tire type andcondition mayalso affect
braking effectiveness.
Ð When replacing tires,install thespeci-
fied size oftires onallfour wheels.
Ð When installing aspare tire,make sure
that itis the proper sizeandtype as
specified onthe tire placard. (SeeªTire
placardº (P.9-9) .)
Ð For detailed information, seeªTires and
wheelsº (P.8-31) .
The Anti-lock BrakingSystem(ABS)controls the
brakes sothe wheels donot lock during hardbraking
or when braking onslippery surfaces. Thesystem
detects therotation speedateach wheel andvaries
the brake fluidpressure toprevent eachwheel from
locking andsliding. Bypreventing eachwheel from
locking, thesystem helpsthedriver maintain steering
control andhelps tominimize swerving andspinning
on slippery surfaces.
Using system
GUID-331 31E90-4EC6 -4CBB-B87D-88A622F21705
Depress thebrake pedalandhold itdown. Depress
the brake pedal withfirmsteady pressure, butdonot
pump thebrakes. TheABS willoperate toprevent the
wheels fromlocking up.Steer thevehicle toavoid
obstacles.
WARNING:
Do not pump thebrake pedal. Doingsomay
result inincreased stoppingdistances.
Starting anddriving
5-23
&RQGLWLRQ