start stop button NISSAN PULSAR 2019 Owners Manual


> (GLW   0RGHO &$@
TROUBLESHOO TINGGUIDE
GUID-5A178 2C3-C48A-416C-BE3D-7 DD3A7E9F25E
Symptom Possible cause Actiontotake
When pushing theignition switchtostop
the engine The
Pposition selecting warninglightin
the meter illuminates andtheinside
warning chimesounds forafew seconds
(Continuously Variable Transmission
models) . The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When shifting theshift lever tothe P
(Park) position (Continuously Variable
T ransmission models). The
inside warning chimesounds fora
few seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªACCº
position. Push
theignition switchtothe ªOFFº
position.
When closing thedoor aftergetting out
of the vehicle The
Intelligent Key system warning light
in the meter blinks inyellow ,the outside
chime sounds 3times andtheinside
warning chimesounds forafew seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
The Pposition selecting warninglightin
the meter illuminates andtheoutside
chime sounds continuously (Continu-
ously Variable Transmission models).The
ignition switchisin the ªACCº or
ªOFFº position andtheshift lever isnot in
the ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andpush theignition switchto
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Closethedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Intelligent Key system warning light
in the meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªIntelligent Key batteryº (P.8-20) .)
The Intelligent Key system warning light
in the meter blinks inyellow andthe
inside warning chimesounds forafew
seconds. The
Intelligent Key isnot inthe vehicle. CarrytheIntelligent Key with you.
Pre-driving checksandadjustments
3-11
&RQGLWLRQ

 
> (GLW   0RGHO &$@
4-20
Heater andairconditione r,and audio system
Clock setting:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urning theclock ON/OFF:
1. Push theTUNE´FOLDER/MENU buttonuntil
ªClock: ONºorªClock: OFFºisdisplayed.
2. Turn theTUNE´FOLDER/MENU buttontotoggle
between ªClock:ONºandªClock: OFFº.
Adjusting theclock:
1. Turn onthe clock.
2. Push theTUNE´FOLDER/MENU buttonuntil
ª Adjust Clock: Noºisdisplayed.
3. Turn theTUNE´FOLDER/MENU buttonuntilªAd-
just Clock: Yesº isdisplayed.
4. Adjust thehour digits byturning theTUNE´-
FOLDER/MENU buttonwhilethedigits areflash-
ing and ªChange Hourºisdisplayed.
5. Push TUNE´FOLDER/MENU button.Adjustthe
minutes byturning theTUNE´FOLDER/MENU
button whilethedigits areflashing andªChange
Minuteº isdisplayed.
When noaction istaken for5seconds, thedisplay will
automatically returntothe original mode.
AUX button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The AUX INjack islocated onthe audio unit.The
IN audio inputjackaccepts anystandard analogaudio
input suchasfrom aportable cassette tapeplayer, CD
player, digitalaudioplayer orlaptop computer.
Push theAUX button toplay acompatible devicewhen
it is plugged intotheAUX INjack.
NISSAN stronglyrecommends usingastereo mini
plug cable whenconnecting yourmusic device tothe
audio system. Musicmaynotplay properly whena
monaural cableisused.
Radio operation
GUID-13A4 72C1-417E-4 046-AABD-E47CCD5 38998
The audio system operates whentheignition switchis
in the ªACCº orªONº position.
/
FM/AM buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
/
button ispushed whiletheaudio
system isoff, the audio system willturn onand the
radio willturn on.
When the
/
button ispushed whileanother
audio source isplaying, theother audio source willturn
off and theradio willturn on.
T o change theradio bands (FM1,FM2,orAM) ,push
the
/
buttons.
TUNE´FOLDER/MENU button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When adjusting thebroadcasting stationfrequency
manually ,turn theTUNE´FOLDER/MENU buttonuntil
the preferred frequency isachieved.
SEEK/TRACK buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o adjust thebroadcasting stationfrequency auto-
matically ,push andrelease the
or
button.
When thesystem detects abroadcasting station,itwill
stop atthe station.
Detected stationsareskipped while
or
button ispushed andheld.
SCAN button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
button ispushed, thesystem willseek
and stop atthe detected broadcasting stationfor5
seconds, andthen itwill start toseek forthe next
broadcasting station.
Push the
button inthis 5-second periodtostop
seeking.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The audio system canstore upto12 FM station
frequencies (forFM1 andFM2) and6AM station
frequencies.
During radioreception, pushingtheradio memory
button forless than 1.5seconds willplay thestored
radio station.
T o store thestation frequency manually:
1. Tune tothe desired broadcasting stationfre-
quency usingthe
buttons.
2. Push andhold oneofthe radio memory buttons
*
1
-
*
6
until abeep sounds.
3. Thefrequency ofthe selected channelwillappear
on the display whenthememory isstored
properly .
4. Perform steps1-3 for allother memory buttons.
CD player operation
GUID-8F214 3D0-16A1-4ACF-95FC-4B 6DCF54F1C8
Loading:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Insert aCD into theslot with thelabel sidefacing up.
The CDwillbeguided automatically intotheslot and
will start playing. Afterthedisc isloaded, track
information willappear onthe display .
CAUTION:
Do not force theCDinto theslot. Thiscould
damage theplayer.
CD button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
button ispushed whileaCD isloaded,
the CD willstart playing.
&RQGLWLRQ

 
> (GLW   0RGHO &$@
4-24
Heater andairconditione r,and audio system
audio system. Musicmaynotplay properly whena
monaural cableisused.
AUX:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Pushing theAUX button willswitch thedisplays as
follows:
iP od/USB ?AUX ?iPod/USB
When theAUX button ispushed withnodevice
plugged intothejack, theaudio system doesnot
change tothe AUX mode.
Radio operation
GUID-052683 ED-ECB9-4FCE-BC7E-0 E89F3482F7B
radio (FM/AM) bandselect :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Pushing theradio band select button willchange the
band asfollows:
AM ?FM1 ?FM2 ?AM
TUNE (Tuning) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theradio TUNE´FOLDER controlknobformanual
tuning.
Radio DataSystem (RDS)(ifequipped) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
RDS stands forRadio DataSystem, andisadata
information servicetransmitted bysome radiostations
on the FM band (notAMband) encoded withina
regular radiobroadcast. Currently,most RDSstations
are inlarge cities, butmany stations arenow
considering broadcasting RDSdata.
RDS candisplay:
. Station name,suchasªThe Grooveº .
. Music orprogramming typesuch asªClassicalº ,
ªCountryº orªRockº .
SEEK tuning:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push the
or
button totune from lowtohigh
or high tolow frequencies andtostop atthe next
broadcasting station.
SCAN tuning:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theSCAN tuningbutton totune from lowtohigh
frequencies andstop ateach broadcasting stationfor
5 seconds. Pushingthebutton againduring this5
seconds periodwillstop SCAN tuningandtheradio
will remain tunedtothat station.
If the SCAN tuningbutton isnot pushed within5
seconds, SCANtuningmoves tothe next
station.
to
Station memory operations:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
12 stations canbeset forthe FM band (6each for
FM1 andFM2) and6stations canbeset forthe AM
band.
1. Choose theradio band using theradio band
select button.
2. Tune tothe desired stationusingtheSEEK´-
TRACK, SCANbuttonorthe radio TUNE´-
FOLDER controlknob.
3. Push andhold thedesired stationpreset
button
to
until theradio mutes.
4. The station indicator willthen come onand the
sound willresume. Memorizing isnow complete.
5. Other buttons canbeset inthe same manner.
If the battery cableisdisconnected, orifthe fuse
opens, theradio memory willbeerased. Inthat case,
reset thedesired stations.
CD player operation
GUID-EB9 ABA6A-DB DF-49C5-B823 -0C6BB6DEB75E
Place theignition switchinthe ACC orON position
and insert theCompact Disc(CD) intotheslot with the
label sidefacing up.The CDwillbeguided auto-
matically intotheslot and start playing.
After loading theCD, thenumber oftracks onthe CD
and theplay time willappear onthe display .
If the radio isalready operating, itwill automatically turn
off and theCD willplay .
If the system hasbeen turned offwhile theCD was
playing, pushing thePWR button willstart theCD.
PLA Y:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When theCD button ispushed withthesystem offand
the CD loaded, thesystem willturn onand theCD will
start toplay .
When theCD button ispushed withtheCD loaded
and theradio playing, theradio willautomatically be
turned offand theCD willstart toplay .
Next/Previous Track andFast
Forward/Rewind:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
or
button ispushed formore than
1.5 seconds whiletheCD isbeing played, theCD will
play while fastforwarding orrewinding. Whenthe
button isreleased, theCD willreturn tonormal play
speed.
When the
or
button ispushed forless than
1.5 seconds whiletheCD isbeing played, thenext
track orthe beginning ofthe current trackonthe CD
will beplayed.
&RQGLWLRQ


> (GLW   0RGHO &$@
STEERING LOCK
GUID-84FC5F 17-E3C7-4BE1-842B-2 338DC8B9E85
T o lock steering wheel
GUID-643 D9CDC-84 45-49BB-8146-1F81F862C0B9
1. Turn theignition switchtothe ªLOCKº position.
2. Remove thekey from theignition switch.
3. Turn thesteering wheel1/6ofaturn clockwise
from thestraight upposition.
T o unlock steering wheel
GUID-F9918 49F-1987-47 3E-AFAD-235CD 32C3712
1. Insert thekey into theignition switch.
2. Gently turntheignition switchwhilerotating the
steering wheelslightly rightandleft.
KEY POSITIONS
GUID-95C A75D5-0D2E -4FAF-BC0 D-63E3D92 C30B8
L OCK (0)
GUID-144 974C4-67B 8-4F45-92DA- 6954532EDEFE
The ignition keycan only beremoved atthis position.
The steering lockcanonly belocked atthis position.
OFF (1)
GUID-54 D824D0-1B74 -4475-84F5-CA80FB23D19C
The engine isturned offwith thesteering wheel
unlocked.
ACC (2)
GUID-17 E1619A-16C2 -4F88-A958-D19A38830 78C
The electrical accessory poweractivates withoutthe
engine turnedon.
ON (3)
GUID-8FAE5841-E613-460B-A9 14-0927C1C5B9A6
The ignition systemandtheelectrical accessory power
activate withouttheengine turnedon.
ST ART (4)
GUID-16D 5423F-AB9 6-440A-A9B2 -60948BDBB14C
The engine starteractivates andtheengine willstart.
The ignition switch,whenreleased, willautomatically
turn tothe ªONº position.
CAUTION:
As soon asthe engine hasstarted, releasethe
ignition switchimmediately.
GUID-8D8 CC42A-947 4-401D-AE63-E7B674 B40563
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-135 62CA9-9E1 B-4EA6-B47 6-DA4BA15F7D32
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-771FA3AD-C30C-4693-9 8E4-B9AE610D746B
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation.
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle.
. Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
Starting anddriving
5-5
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ


> (GLW   0RGHO &$@
5-10
Starting anddriving
slowly whentheengine isrunning. Make
sure thefoot brake pedalisdepressed fully
and thevehicle isstopped beforeshifting
the shift lever.
. MAKE SUREOFTHE SHIFT LEVER POSI-
TION -Make suretheshift lever isin the
desired position. ªDºand ªLºor manual shift
mode areused tomove forward andªRºto
back up.
. WARM UPTHE ENGINE -Due tothe higher
idle speeds whentheengine iscold, extra
caution mustbeexercised whenshifting the
shift lever intothedriving position immedi-
ately afterstarting theengine.
Shifting
GUID-22528B F3-29D9-403E-AE79-B EA15D2F63 FE
JVS0199X
With manual shiftmode (RHD model)
JVO0030X
Without manualshiftmode (LHD model)

Push thebutton
*
A
while depressing the
foot brake
pedal.

Push thebutton
*
A
.

Just move theshift lever.
WARNING:
. Apply theparking brakeifthe shift lever isin
any position whiletheengine isnot running.
Failure todo socould cause thevehicle to
move unexpectedly orroll away andresult in
serious personal injuryorproperty damage.
. Ifthe shift lever cannot bemoved fromthe
ªPº (Park) position whiletheengine is
running andthefoot brake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause an
accident injuringyourself andothers.
After starting theengine, fullydepress thefoot brake
pedal, pushtheshift lever button andmove theshift
lever outofthe ªPº (Park) position.
If the ignition switchisplaced inthe ªOFFº orªACCº
position forany reason whiletheshift lever isin any positions
otherthantheªPº (Park) position, theignition
switch cannot beplaced inthe ªLOCKº position.
If the ignition switchcannot beplaced inthe ªLOCKº
position, performthefollowing steps:
1. Apply theparking brake.
2. Place theignition switchinthe ªONº position
while depressing thefoot brake pedal.
3. Move theshift lever tothe ªPº (Park) position.
4. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position.
P (Park) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition whenthevehicle isparked orwhen
starting theengine. Makesurethatthevehicle is
completely stoppedandmove theshift lever into
the ªPº(Park) position. Applytheparking brake.
When parking onahill, first depress thefoot brake
pedal, applytheparking brake,andthen move theshift
lever intotheªPº (Park) position.
R (Reverse) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Use thisposition toback up.Make surethatthevehicle
is completely stoppedbeforeselecting theªRº
(Reverse) position.
N (Neutral) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Neither theforward norreverse gearisengaged. The
engine canbestarted inthis position. You may shift to
the ªNº (Neutral) positionandrestart astalled engine
while thevehicle ismoving.
&RQGLWLRQ


> (GLW   0RGHO &$@
5-12
Starting anddriving
turn theSPORT modeoff.
Remember nottodrive athigh speeds forextended
periods oftime withtheSPORT modeinthe ªONº
position. Thisreduces fueleconomy .
Accelerator downshift-in the ªDº position -
GUID-FE4ECF FF-36B2-40BE-8768- DFB973246 910
For passing orclimbing hills,depress theaccelerator
pedal tothe floor. Thisshifts thetransmission down
into alower gear,depending onthe vehicle speed.
Shift lockrelease
GUID-7F 9F39D1-C CBB-4C10-9 90D-C12C1B 7B40EB
JVO0027X
Without manualshiftmode (LHDmodel)
If the battery charge islow ordischarged, theshift
lever maynotbemoved fromtheªPº (Park) position
even withthebrake pedal depressed andtheshift lever
button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº orªLOCKº
position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position,
and remove thekey ifit is inserted. 2.
Apply theparking brake.
3. Push theshift lever button andmove theshift lever
to the ªNº (Neutral) positionwhileholding down
the shift lockrelease.
Place theignition switchinthe ªONº position tounlock
the steering wheel.Thevehicle maybemoved tothe
desired location.
For model withIntelligent Key system: Ifthe battery is
discharged completely,the steering wheelcannot be
unlocked. Donot move thevehicle withthesteering
wheel locked.
If the shift lever cannot bemoved outofthe ªPº (Park)
position, haveaNISSAN dealerchecktheCVT system
as soon aspossible.
WARNING:
If the shift lever cannot bemoved fromtheªPº
(Park) position whiletheengine isrunning and
the brake pedalisdepressed, thestop lights
may notwork. Malfunctioning stoplights could
cause anaccident injuringyourself andothers.
High fluidtemperature protectionmode
GUID-92F6 203D-4431 -412E-BD73-BE0106E 26143
This transmission hasahigh fluidtemperature protec-
tion mode. Ifthe fluid temperature becomestoohigh
(for example, whenclimbing steepgrades inhigh
temperature withheavy loads, suchaswhen towing a
trailer) ,engine powerand,under someconditions,
vehicle speedwillbedecreased automatically to
reduce thechance oftransmission damage.Vehicle
speed canbecontrolled withtheaccelerator pedal,
but engine andvehicle speedmaybelimited.
Fail-safe
GUID-4C5CA0 11-BE46-48EA-A16F-D6 F3A9BF72B8
When thefail-safe operation occurs,theCVT willnot
be shifted tothe selected drivingposition.
If the vehicle isdriven underextreme conditions,
such asexcessive wheelspinning andsubse-
quent hardbraking, thefail-safe systemmaybe
activated. Thiswilloccur evenifall electrical
circuits arefunctioning properly.Inthis case,
place theignition switchinthe ªOFFº position
and wait for10seconds. Thenturntheignition
switch backtothe ªONº position. Thevehicle
should returntoits normal operating condition.
If itdoes notreturn toits normal operating
condition, haveaNISSAN dealercheckthe
transmission andrepair itifnecessary.
WARNING:
When thefail-safe operation occurs,vehicle
speed maybegradually reduced.Thereduced
speed maybelower thanother traffic,which
could increase thechance ofacollision. Be
especially carefulwhendriving. Ifnecessary, pull
to the side ofthe road atasafe place andallow
the transmission toreturn tonormal operation,
or have itrepaired ifnecessary.
&RQGLWLRQ