light NISSAN PULSAR 2021 Owner´s Manual


> (GLW   0RGHO &$@
3-10
Pre-driving checksandadjustments
. When theIntelligent Keyisplaced insideof
the glove box.
. When theIntelligent Keyisplaced insideof
the door pockets.
. When theIntelligent Keyisplaced insideor
near metallic materials.
The lockout protection mayfunction whenthe
Intelligent Keyisoutside thevehicle butistoo
close tothe vehicle.
Unlocking doors
GUID-4C06 CE36-CA33- 4E53-96FA-D9242916BE3F
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or back doorrequest
switch
*
B
.
3. Alldoors andtheback doorwillbeunlocked.
If adoor handle ispulled whileunlocking thedoors,
that door maynotbeunlocked. Returning thedoor
handle toits original position willunlock thedoor. Ifthe
door does notunlock, afterreturning thedoor handle,
push thedoor handle request switchtounlock the
door.
Automatic relock:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds
after pushing therequest switchwhilethedoors are
locked.
. Opening anydoors.
. Pushing theignition switch.
If during thepreset timeperiod theªUNL OCKº
button onthe Intelligent Key ispushed, alldoors willbe
locked automatically afterthenext preset time.
Opening backdoor
GUID-0CD2 99CD-0286- 4C11-B0AF- 3E552439AB7 7
1. Carry theIntelligent Key .
2. Push theback dooropener switch
*
c
.
3. The back doorwillunlock andopen.
BA TTER YSA VER SYSTEM
GUID-BC8 51CDF-ADC2 -4B42-AAD2-6 DB445A0AC51
When allthe following conditions aremet foraperiod
of time, thebattery saversystem willcutoffthe power
supply toprevent batterydischarge.
. The ignition switchisin the ªACCº position, and
. Alldoors areclosed, and
. The shift lever isin the ªPº (Park) position
(Continuously Variable Transmission models).
W ARNING ANDAUDIBLE REMINDERS
GUID-F1 838F66-C4 36-4050-91 6F-4C2899FC2471
The Intelligent Key system isequipped withafunction
that isdesigned tominimize improper operations ofthe
Intelligent Key and tohelp prevent thevehicle from
being stolen. Achime orbeep sounds insideand
outside thevehicle andawarning lightilluminates or
blinks.
See thetroubleshooting guideonthe next page and
ªW arning/indicator lightsandaudible remindersº (P.2-
11) .
Intelligent Key system warning light:
P position selecting warninglight:
(Continuously
V ariable Transmission models)
CAUTION:
When thechime orbeep sounds orthe warning
light illuminates orblinks, besure tocheck both
the vehicle andtheIntelligent Key.
&RQGLWLRQ


> (GLW   0RGHO &$@
TROUBLESHOO TINGGUIDE
GUID-5A178 2C3-C48A-416C-BE3D-7 DD3A7E9F25E
Symptom Possible cause Actiontotake
When pushing theignition switchtostop
the engine The
Pposition selecting warninglightin
the meter illuminates andtheinside
warning chimesounds forafew seconds
(Continuously Variable Transmission
models) . The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When shifting theshift lever tothe P
(Park) position (Continuously Variable
T ransmission models). The
inside warning chimesounds fora
few seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªACCº
position. Push
theignition switchtothe ªOFFº
position.
When closing thedoor aftergetting out
of the vehicle The
Intelligent Key system warning light
in the meter blinks inyellow ,the outside
chime sounds 3times andtheinside
warning chimesounds forafew seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
The Pposition selecting warninglightin
the meter illuminates andtheoutside
chime sounds continuously (Continu-
ously Variable Transmission models).The
ignition switchisin the ªACCº or
ªOFFº position andtheshift lever isnot in
the ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andpush theignition switchto
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Closethedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Intelligent Key system warning light
in the meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªIntelligent Key batteryº (P.8-20) .)
The Intelligent Key system warning light
in the meter blinks inyellow andthe
inside warning chimesounds forafew
seconds. The
Intelligent Key isnot inthe vehicle. CarrytheIntelligent Key with you.
Pre-driving checksandadjustments
3-11
&RQGLWLRQ


> (GLW   0RGHO &$@
3-12
Pre-driving checksandadjustments
Symptom Possible cause Actiontotake
When pushing theignition switch The
Intelligent Key system warning light
in the meter illuminates inyellow . It
warns ofamalfunction withthe
electrical steeringlocksystem orthe
Intelligent Key system. Contact
aNISSAN dealer.
USING REMOTEKEYLESS ENTRYFUNC-
TION
GUID-2AE42 741-EBE2-4FE8-BF1B-689F0094A CB4
SP A2252
*
1
L OCK button
*
2
UNL OCK button
*
3
P ANIC button
Operating range
GUID-D3 BB5654-718 5-45AE-9C12-C3962F5F9FD5
It is possible tolock/unlock alldoors including theback
door using theremote keyless entrysystem and
provides thepanic alarm. Theoperating distance
depends upontheconditions aroundthevehicle. To
securely operatethelock andunlock buttons,
approach thevehicle toabout 1m (3.3 ft)from the
door.
The remote keyless entrysystem willnot function under
the following conditions:
. When theIntelligent Key isnot within the
operational range. .
When theIntelligent Key battery isdischarged.
For information regardingthereplacement ofabattery ,
see ªIntelligent Key batteryº (P.8-20) .
Locking doors
GUID-7AB F6AB4-A10F-4 5F7-A6A2-FD87D2681DA F
When youlock orunlock thedoors, thehazard
indicator willflash andtheoutside chimewillsound
as aconfirmation.
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº
button
*
1
on the
Intelligent Key .
4. Alldoors willbelocked.
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-686322 49-BE76-4075-AE4E-73EE90E081 B8
1. Push theªUNL OCKº
button
*
2
on the
Intelligent Key .
2. Alldoors (including theback door) willbe
unlocked. Automatic
relock:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds
after pushing theªUNL OCKº
button
*
2
on the
Intelligent Key while thedoors arelocked. Ifduring this
30-second timeperiod, theªUNL OCKº
button
*
2
on the Intelligent Key ispushed, alldoors willbe
locked automatically afteranother 30seconds.
. Opening anydoor orback door.
. Pushing theignition switch.
Using panicalarm
GUID-D96 10C4E-3B6 8-4E70-996 1-4400E269C 2F0
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
3
on the
Intelligent Key for more than1second.
2. The theft warning alarmwillstay onfor 25
seconds.
3. The panic alarmstops when:
. Ithas runfor25 seconds, or
. Any ofthe buttons onthe Intelligent Key are
pushed. (Note:PANIC button should bepushed
for more than1second.)
&RQGLWLRQ


> (GLW   0RGHO &$@
3-14
Pre-driving checksandadjustments
GUID-C3B 71A2F-226 3-4BD0-AEF 3-1E0562880E42
Y our vehicle isequipped withNISSAN Anti-theft
System (NATS)*.
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-036 EA410-EB76 -4EA4-B53B-6ABB43 43E2A9
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Security indicator light
GUID-769789 21-F8F5-4B9C-B81F-AAE 7B38642C 4
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS.
The light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
GUID-84DFC8 CD-2300-48BD-B6F0-707623C404FF
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
SECURITY SY STEM (ifequipped) HOOD
&RQGLWLRQ


> (GLW   0RGHO &$@
3-18
Pre-driving checksandadjustments
GUID-D5C 9F9CE-0CC3 -414E-BAB0-ACDD06428B D1
WARNING:
Adjust theposition ofall mirrors beforedriving.
Do not adjust themirror positions whiledriving
so that fullattention maybegiven tovehicle
operation.
INSIDE REARVIEW MIRROR
GUID-704289 61-428B-4E74-8FDB- B4B0BBD3 C4C9
While holding theinside rearview mirror,adjustthe
mirror angles untilthedesired position is
achieved.
SP A2143
Pull theadjusting lever
*
1
when theglare fromthe
headlights ofthe vehicle behindyouobstructs your
vision atnight.
Push theadjusting lever
*
2
during theday forthe best
rearward visibility.
OUTSIDE REARVIEW MIRRORS
GUID-1CA29 965-E808-4DBC-8766-4 82221B11AAC
WARNING:
. Never touchtheoutside rearview mirrors
while theyareinmotion. Doingsomay pinch
your fingers ordamage themirror.
. Never drivethevehicle withtheoutside
rearview mirrorsfolded.Thisreduces rear
view visibility andmay lead toan accident.
. Objects viewedinthe outside mirrorare
closer thantheyappear (ifequipped) .
. The picture dimensions anddistance inthe
outside mirrorsarenot real.
Adjusting
GUID-BA77 2B9A-BDEB -4A66-8B11- 44E022F0FD0 5
SP A2214
The outside rearview mirrorremote controloperates
when theignition switchisin the ªACCº orªONº
position.
1. Move theswitch toselect theright
*
1
or left
*
2
mirror.
2. Adjust eachmirror bypushing theswitch untilthe
desired position isachieved
*
3
.
Folding
GUID-B7 2E02F0-F6 CE-4952-A3 31-280DB1590690
Remote controltype:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
SP A1732A
The outside rearview mirrorremote controloperates
when theignition switchisin the ªACCº orªONº
position.
The outside rearview mirrorsautomatically foldwhen
the outside rearview mirrorfolding switchispushed to
the ªCLOSEº position
*
1
. To unfold, pushtothe
ªOPENº position
*
2
.
CAUTION:
. Continuously performingthefold/unfold
operation ofthe outside rearview mirror
may cause theswitch tostop theoperation.
. Do not touch themirrors whiletheyare
moving. Your hand maybepinched, andthe
mirror maymalfunction.
. Donot drive withthemirrors stored.You will
be unable tosee behind thevehicle.
. Ifthe mirrors werefolded orunfolded by
hand, thereisachance thatthemirror will
move forward orbackward duringdriving. If
the mirrors werefolded orunfolded byhand,
MIRRORS
&RQGLWLRQ


> (GLW   0RGHO &$@
be sure toadjust themagain electrically
before driving.
Manual controltype:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
SP A1829
Fold theoutside rearview mirrorbypushing ittoward
the rear ofthe vehicle.
V ANITY MIRROR (ifequipped)
GUID-3BBC6 6EB-AB23-4A75-833B-95 62E91FEDD 9
SP A2192
T o use thefront vanity mirror, pulldown thesun visor
and pullupthe cover.
GUID-ABB 97913-7F76 -4D46-BF6E-5 E27714E1F2C
WARNING:
. Never drivethevehicle withtheparking
brake applied. Thebrake willoverheat and
fail tooperate andwilllead toan accident.
. Never release theparking brakefromout-
side thevehicle. Ifthe vehicle moves, itwill
be impossible topush thefoot brake pedal
and willlead toan accident.
. Never usetheshift lever inplace ofthe
parking brake.Whenparking, besure the
parking brakeisfully applied.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Theycould unknowingly
release theparking brakeandinadvertently
become involved inaserious
accident.
SP A2110
T o apply theparking brake,pulltheparking brakelever
up
*
1
.
T o release theparking brake,firmlydepress andhold
the foot brake pedal. Pullupthe parking brakelever
slightly ,push thebutton
*
2
and lower thelever
completely
*
3
.
Before driving, besure thatthebrake warning lighthas turned
off.
Pre-driving checksandadjustments
3-19
P
ARKING BRAKE
&RQGLWLRQ


> (GLW   0RGHO &$@
4-4
Heater andairconditioner ,and audio system
Backing upbehind aprojecting object
GUID-817 A4BD2-22E E-4EC4-B3D3 -1D69559 88858
JVH0418X
The position
*
C
is shown furtherthantheposition
*
B
in the display .However, theposition
*
C
is actually at
the same distance asthe position
*
A
. The vehicle
may hitthe object whenbacking uptothe position
*
A
if the object projects overtheactual backing up
course.
HOW TO ADJUST THESCREEN
GUID-509 CFCEC-CEF 2-42AA-B299-44572B2 17738
Models withnavigation system:
Guide lines:
Guide linedisplay canbeturned onand offbypushing
the CAMERA button.
Display adjustments:
For operations toadjust thescreen display settings
including brightness, language,etc.,seetheseparately
provided NISSANConnect Owner'sManual.
Models without navigation system:
Brightness, ContrastandLanguage ofthe messages
on the Rearview Monitorscreencanbeadjusted.
1. Push theENTER/SETTING buttonwhilethe
Rearview Monitorscreenisdisplayed. Eachtime
the ENTER/SETTING buttonispushed, thenext
setting itemisselected.
2. Turn theTUNE´FOLDER controlknobtoadjust the
setting ofthe item.
3. Push theENTER/SETTING buttontocomplete
the setting adjustment.
4. Push ENTER/SETTING buttonagaintoselect the
next setting item.
Setting adjustment modewillend ifthe ENTER/
SETTING buttonispushed whilethelast setting item
is selected, ifthe BACK button ispushed orifthe
screen isleft without operation forsome time.
NO TES
GUID-CDAC 01D7-4D60-4ABD-AC3 3-DB65BFB27E34
. When theview isswitched, thedisplay images on
the screen maybedisplayed withsome delay.
. When thetemperature isextremely highorlow ,
the screen maynotclearly display objects. Thisis
not amalfunction.
. When strong lightisdirectly coming onthe
camera, objectsmaynotbedisplayed clearly.
This isnot amalfunction.
. Vertical linesmaybeseen inobjects onthe
screen. Thisisdue tostrong reflected lightfrom
the bumper. Thisisnot amalfunction.
. Thescreen mayflicker underfluorescent light.This
is not amalfunction.
. Thecolors ofobjects onthe Rearview Monitormay
differ somewhat fromtheactual colorofobjects.
This isnot amalfunction.
. Objects onthe monitor maynotbeclear inadark
environment. Thisisnot amalfunction.
. Ifdirt, rainorsnow accumulates onthe camera,
the Rearview Monitormaynotdisplay objects
clearly .Clean thecamera.
. Donot use alcohol, benzineorthinner toclean the
camera. Thiswillcause discoloration. To clean the
camera, wipewithacloth dampened withdiluted
mild cleaning agentandthen wipe withadry cloth.
. Donot damage thecamera asthe monitor screen
may beadversely affected.
. Donot use wax onthe camera window.Wipe off
any wax with aclean clothdampened withmild
detergent dilutedwithwater.
&RQGLWLRQ


> (GLW   0RGHO &$@
MANUAL AIRCONDITIONER
GUID-B9 F02A01-74 43-43F7-84E C-9EEBAFE5 A528
JVH0499X
1. Airintake lever(Outside aircirculation ª
º
/Air recirculation
ª
º)
2. Airflow control dial
3. Fanspeed control
ª
º dial
4. ªA/Cº (AirConditioner) button
5. Temperature controldial
6. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-21) .)
T o turn offthe heater andairconditioner, turnthefan
speed control ª
º dial tothe ªOFFº (0)position.
Controls
GUID-3B92B 3BB-498F-4734-93D4 -D381D317DF19
Outside aircirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow isdrawn fromoutside thevehicle.
Air recirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow iscirculated insidethevehicle. Air
flow control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theairflow control dialtochange theairflow
mode.
Ð Airflows fromthecenter andside
ventilators.
Ð Airflows fromthecenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlets.
Ð Airflows fromthefront defogger andfoot
outlets.
Ð Airflows mainly fromthefront defogger
outlets.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed. A/C
(AirConditioner) operation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
T emperature control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
Heater operation
GUID-ED0 DE5AF-669 2-440D-A937 -F37C2F707C77
Heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe ª
º position for
normal heating.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs outside airtothe side andcenter
ventilators.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
Heater andairconditione r,and audio system
4-7
&RQGLWLRQ


> (GLW   0RGHO &$@
4-8
Heater andairconditioner ,and audio system
Defrosting ordefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs theairtothe defogger outletsto
defrost/defog thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
. To remove frostfromtheoutside surfaceofthe
windshield quickly,turn thetemperature control
dial tothe maximum hotposition andthefan
speed control ª
º dial tomaximum position.
. Ifit is difficult todefog thewindshield, turnthe
ª A/Cº button on.
Bi-level heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs coolairfrom theside andcenter
ventilators andwarm airfrom thefoot outlets. When
the temperature controldialisturned tothe maximum
hot orcool position, theairbetween theventilators and
the foot outlets isthe same temperature.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position. Heating
anddefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode heatstheinterior anddefogs thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe maximum
hot (right) position.
5. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
Air conditioner operation
GUID-D4 7C17DA-AC3 0-4F0E-ADA4 -8C2DE01347BA
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused tocool anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction. Dehumidified
heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused toheat anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Dehumidified defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todefog thewindows and
dehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position.
&RQGLWLRQ


> (GLW   0RGHO &$@
AUT OMA TICAIR CONDITIONER
GUID-EEDAB BD4-5460-4E74-8DA 6-F18F780C 0A98
JVH0053X
* The switch layoutinthe illustration isfor the Left-
Hand Drive(LHD) model. FortheRight-Hand Drive
(RHD) model, theswitch layoutwillbethe opposite.
1. Temperature controlbuttons (driverside)
2. ª
º rear defogger button(SeeªDefogger
switchº (P.2-21) .)
3. ª
º front defogger button
4. Display screen
5. ª
º Air recirculation button
6. ª
º Outside aircirculation button
7. Temperature controlbuttons (passenger side)
8. ªON´OFFº button
9. ªAUT Oºbutton
10. ª
º fan speed control button
11. ªMODEº button
12. ªA/Cº (AirConditioner) button
13. ªDUAL ºzone control ON/OFF button
Automatic operation(AUTO)
GUID-3C17 66E6-9820-4047-AC2F-4 76AFCB48C8B
The AUTOmode maybeused year-round asthe
system automatically controlstheairconditioner toa
constant temperature, airflow distribution andfan
speed afterthedesired temperature isset manually .
T o turn theheater andairconditioner onoroff, push
the ªON´OFFº button.
Cooling anddehumidified heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe A/C indicator lightisnot illuminated, push
the ªA/Cº button (theA/C indicator lightwill
illuminate) .
3. Push thetemperature controlbuttons
(ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to independently
changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
4. Push either theoutside aircirculation ª
º
button orthe airrecirculation ª
º button (the
button withanindicator lightilluminated) for
approximately 2seconds toswitch tothe auto-
matic airintake control mode(theindicator light
will blink twice) .
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Heating (A/Coff):
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe ªA/C indicator lightisilluminated, pushthe
ª A/Cº button (theA/C indicator lightwillturn off).
3. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to
independently changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
Heater andairconditione r,and audio system
4-9
&RQGLWLRQ