steering NISSAN PULSAR 2022 Owner's Manual

Page 132 of 217



> (GLW   0RGHO &$@
STEERING LOCK
GUID-84FC5F 17-E3C7-4BE1-842B-2 338DC8B9E85
T o lock steering wheel
GUID-643 D9CDC-84 45-49BB-8146-1F81F862C0B9
1. Turn theignition switchtothe ªLOCKº position.
2. Remove thekey from theignition switch.
3. Turn thesteering wheel1/6ofaturn clockwise
from thestraight upposition.
T o unlock steering wheel
GUID-F9918 49F-1987-47 3E-AFAD-235CD 32C3712
1. Insert thekey into theignition switch.
2. Gently turntheignition switchwhilerotating the
steering wheelslightly rightandleft.
KEY POSITIONS
GUID-95C A75D5-0D2E -4FAF-BC0 D-63E3D92 C30B8
L OCK (0)
GUID-144 974C4-67B 8-4F45-92DA- 6954532EDEFE
The ignition keycan only beremoved atthis position.
The steering lockcanonly belocked atthis position.
OFF (1)
GUID-54 D824D0-1B74 -4475-84F5-CA80FB23D19C
The engine isturned offwith thesteering wheel
unlocked.
ACC (2)
GUID-17 E1619A-16C2 -4F88-A958-D19A38830 78C
The electrical accessory poweractivates withoutthe
engine turnedon.
ON (3)
GUID-8FAE5841-E613-460B-A9 14-0927C1C5B9A6
The ignition systemandtheelectrical accessory power
activate withouttheengine turnedon.
ST ART (4)
GUID-16D 5423F-AB9 6-440A-A9B2 -60948BDBB14C
The engine starteractivates andtheengine willstart.
The ignition switch,whenreleased, willautomatically
turn tothe ªONº position.
CAUTION:
As soon asthe engine hasstarted, releasethe
ignition switchimmediately.
GUID-8D8 CC42A-947 4-401D-AE63-E7B674 B40563
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-135 62CA9-9E1 B-4EA6-B47 6-DA4BA15F7D32
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-771FA3AD-C30C-4693-9 8E4-B9AE610D746B
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation.
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle.
. Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
Starting anddriving
5-5
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ

Page 133 of 217



> (GLW   0RGHO &$@
5-6
Starting anddriving
possible. (SeeªJump startingº (P.6-5) .)
Operating range
GUID-80A4 4E43-0A1B -4ABB-A7E6-B D571734D53 C
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent
K ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-59131E CE-A47C-4849-A212-5FF7051D7462
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position. When
pushing theignition switchtothe ªOFFº position, make
sure theshift lever isin the ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Push theignition switchtothe ªOFFº position.
3. Open thedoor. Theignition switchwillchange to
the ªLOCKº position.
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake depressed.
STEERING LOCK
GUID-E05 63F6E-C5FD- 4C6A-83D7-9D 4CAE048AA9
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-199 0FCB9-1E4 5-4067-918 5-B54F6548 9D5D
1. Push theignition switchtothe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-836 CAB5B-2A97-4D4D-B A13-0D61A7DEAB3B
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe ignition switchposition doesnot
change fromtheªLOCKº position, pushthe
ignition switchagainwhilerotating the
steering wheelslightly tothe right andleft.
IGNITION SWITCHPOSITIONS
GUID-787 88975-EF20-4EEC-9 BD9-C8FD 1F38789B
SSD0859
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission
model) orthe clutch pedal(Manual Transmission
model) ,the ignition switchposition willchange as
follows:
. Push oncetochange toªACCº .
. Push twotimes tochange toªONº .
. Push three times tochange toªOFFº .
&RQGLWLRQ

Page 134 of 217



> (GLW   0RGHO &$@
. Push fourtimes toreturn toªACCº .
. Open orclose anydoor toreturn toªLOCKº when
in the ªOFFº position.
The indicator light
*
A
on the ignition switchillumi-
nates whentheignition switchisin the ªACCº orªONº
position.
L OCK position
GUID-43425B BE-7F00-4ED4-A87 5-071702F2 842A
The ignition switchandsteering lockcanonly be
locked atthis position.
The ignition switchwillbeunlocked whenitis pushed
to the ªACCº position whilecarrying theIntelligent Key .
ACC position
GUID-202F5 141-00BE-47DC-B76C-7 268FE6DC636
The electrical accessory poweractivates atthis
position withouttheengine turnedon.
ON position
GUID-9FF5 AE68-135D-4 D67-8BBC-43E8DC881 23E
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
OFF position
GUID-81EA9 526-2AC3-4FF2-91B3 -F3E0BFFFA02D
The engine isturned offwith thesteering wheel
unlocked.
WARNING:
Never pushtheignition switchtothe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
Do not leave thevehicle forextended periodsof
time when theignition switchisin the ªACCº or
ªONº position andtheengine isnot running. This
candischarge thebattery.
INTELLIGENT KEYBATTER YDISCHARGE
GUID-EC7 BC919-57B A-4B13-9C48-52E166 3770CA
SSD0860
If the battery ofthe Intelligent Key isdischarged, or
environmental conditionsinterferewiththeIntelligent
K ey operation, starttheengine according tothe
following procedure:
1. Continuously Variable Transmission (CVT)
model:
Move theshift lever tothe ªPº (Park) orªNº
(Neutral) position.
Manual Transmission (MT)model:
Move theshift lever tothe ªNº (Neutral) position.
2. Firmly depress thebrake pedal.
3. Touch theignition switchwiththeIntelligent Key
as illustrated. (Achime willsound.)
4. Push theignition switchwhiledepressing the
brake pedal (Continuously Variable Transmission
models) orclutch pedal(Manual Transmission
models) within10seconds afterthechime
sounds. Theengine willstart.
After step3is performed, whentheignition switchis
pushed withoutdepressing thebrake pedal (Con-
tinuously Variable Transmission models)orclutch pedal
(Manual Transmission models),the ignition
switch position willchange toªACCº .
NO TE:
. When theignition switchispushed tothe
ª ACCº orªONº position orthe engine is
started bythe above procedures, theIntel-
ligent Keysystem warning lightmayblink in
yellow evenifthe Intelligent Keyisinside
the vehicle. Thisisnot amalfunction. To stop
the warning lightfrom blinking, touchthe
ignition switchwiththeIntelligent Key
again.
. Ifthe Intelligent Keysystem warning lightin
the meter isblinking ingreen, replace the
battery assoon aspossible. (SeeªBatteryº
(P .8-18) .)
Starting anddriving
5-7
&RQGLWLRQ

Page 139 of 217



> (GLW   0RGHO &$@
5-12
Starting anddriving
turn theSPORT modeoff.
Remember nottodrive athigh speeds forextended
periods oftime withtheSPORT modeinthe ªONº
position. Thisreduces fueleconomy .
Accelerator downshift-in the ªDº position -
GUID-FE4ECF FF-36B2-40BE-8768- DFB973246 910
For passing orclimbing hills,depress theaccelerator
pedal tothe floor. Thisshifts thetransmission down
into alower gear,depending onthe vehicle speed.
Shift lockrelease
GUID-7F 9F39D1-C CBB-4C10-9 90D-C12C1B 7B40EB
JVO0027X
Without manualshiftmode (LHDmodel)
If the battery charge islow ordischarged, theshift
lever maynotbemoved fromtheªPº (Park) position
even withthebrake pedal depressed andtheshift lever
button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Models withIntelligent Keysystem:
Place theignition switchinthe ªOFFº orªLOCKº
position.
Models without Intelligent Keysystem:
Place theignition switchinthe ªLOCKº position,
and remove thekey ifit is inserted. 2.
Apply theparking brake.
3. Push theshift lever button andmove theshift lever
to the ªNº (Neutral) positionwhileholding down
the shift lockrelease.
Place theignition switchinthe ªONº position tounlock
the steering wheel.Thevehicle maybemoved tothe
desired location.
For model withIntelligent Key system: Ifthe battery is
discharged completely,the steering wheelcannot be
unlocked. Donot move thevehicle withthesteering
wheel locked.
If the shift lever cannot bemoved outofthe ªPº (Park)
position, haveaNISSAN dealerchecktheCVT system
as soon aspossible.
WARNING:
If the shift lever cannot bemoved fromtheªPº
(Park) position whiletheengine isrunning and
the brake pedalisdepressed, thestop lights
may notwork. Malfunctioning stoplights could
cause anaccident injuringyourself andothers.
High fluidtemperature protectionmode
GUID-92F6 203D-4431 -412E-BD73-BE0106E 26143
This transmission hasahigh fluidtemperature protec-
tion mode. Ifthe fluid temperature becomestoohigh
(for example, whenclimbing steepgrades inhigh
temperature withheavy loads, suchaswhen towing a
trailer) ,engine powerand,under someconditions,
vehicle speedwillbedecreased automatically to
reduce thechance oftransmission damage.Vehicle
speed canbecontrolled withtheaccelerator pedal,
but engine andvehicle speedmaybelimited.
Fail-safe
GUID-4C5CA0 11-BE46-48EA-A16F-D6 F3A9BF72B8
When thefail-safe operation occurs,theCVT willnot
be shifted tothe selected drivingposition.
If the vehicle isdriven underextreme conditions,
such asexcessive wheelspinning andsubse-
quent hardbraking, thefail-safe systemmaybe
activated. Thiswilloccur evenifall electrical
circuits arefunctioning properly.Inthis case,
place theignition switchinthe ªOFFº position
and wait for10seconds. Thenturntheignition
switch backtothe ªONº position. Thevehicle
should returntoits normal operating condition.
If itdoes notreturn toits normal operating
condition, haveaNISSAN dealercheckthe
transmission andrepair itifnecessary.
WARNING:
When thefail-safe operation occurs,vehicle
speed maybegradually reduced.Thereduced
speed maybelower thanother traffic,which
could increase thechance ofacollision. Be
especially carefulwhendriving. Ifnecessary, pull
to the side ofthe road atasafe place andallow
the transmission toreturn tonormal operation,
or have itrepaired ifnecessary.
&RQGLWLRQ

Page 141 of 217



> (GLW   0RGHO &$@
5-14
Starting anddriving
Suggested maximumspeedineach gear
GUID-11 EBED13-E7 31-4C5E-A8 5D-AC41FFF83620
Downshift toalower gearifthe engine isnot running
smoothly ,or ifyou need toaccelerate.
Do not exceed themaximum suggested speed(shown
below) inany gear. Forlevel road driving, usethe
highest gearsuggested forthat speed. Always observe
posted speedlimits,anddrive according tothe road
conditions whichwillensure safeoperation. Donot
over-rev theengine whenshifting toalower gearasit
may cause engine damage orloss ofvehicle control.
5-speed ManualTransmission (MT)model:
HR16DE enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 45(28)
2nd 83(51)
3rd 121(75)
4th 164(102)
5th Ð(Ð)
6-speed ManualTransmission (MT)model:
MRA8DE enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 47(29)
2nd 84(52)
3rd 117(72)
4th 152(94)
5th Ð(Ð)
6th Ð(Ð) MR16DDT
enginemodel:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
km/h (MPH)
1st 49(30)
2nd 85(53)
3rd 119(74)
4th 149(92)
5th 182(113)
6th Ð(Ð)
GUID-664 D8AFF-261B -4944-B0D6-F 0B3F5767B92
WARNING:
. The Vehicle Dynamic Control(VDC)system
is designed tohelp thedriver maintain
stability butdoes notprevent accidents
due toabrupt steering operation athigh
speeds orby careless ordangerous driving
techniques. Reducevehiclespeedandbe
especially carefulwhendriving andcorner-
ing onslippery surfaces andalways drive
carefully.
. Donot modify thevehicle's suspension. If
suspension partssuchasshock absorbers,
struts, springs, stabilizer bars,bushings and
wheels arenot NISSAN recommended for
your vehicle orare extremely deteriorated,
the VDC system maynotoperate properly.
This could adversely affectvehicle handling
performance, andtheVDC warning light
may illuminate.
. Ifbrake related partssuchasbrake pads,
rotors andcalipers arenot NISSAN recom-
mended orare extremely deteriorated, the
VDC system maynotoperate properly and
the VDC warning light
may illuminate.
. Ifengine control related partsarenot
NISSAN recommended orare extremely
deteriorated, theVDC warning light
may illuminate.
. When driving onextremely inclinedsurfaces
such ashigher banked corners, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate. Do
not drive onthese typesofroads.
. When driving onanunstable surfacesuchas
a turntable, ferry,elevator orramp, theVDC
VEHICLE DYNAMIC CONTROL (VDC)
S Y STEM (ifequipped)
&RQGLWLRQ

Page 142 of 217



> (GLW   0RGHO &$@
warning light
may illuminate. Thisisnot
a malfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC
system maynotoperate properly andthe
VDC warning light
may illuminate.
. The VDC system isnot asubstitute forwinter
tires ortire chains onasnow covered road.
The Vehicle Dynamic Control(VDC)system uses
various sensors tomonitor driverinputs andvehicle
motion. Undercertain drivingconditions, theVDC
system helpstoperform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC system canhelp thedriver tomaintain control
of the vehicle, butitcannot prevent lossofvehicle
control inall driving situations.
When theVDC system operates, theVDC warning
light
in the instrument panelflashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path. .
You may feelapulsation inthe brake pedaland
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC system is
working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If amalfunction occursinthe system, theVDC warning
light
illuminates inthe instrument panel.TheVDC
system automatically turnsoff.
The VDC OFFswitch isused toturn offthe VDC
system. TheVDC offindicator light
illuminates to
indicate theVDC system isoff. When theVDC OFF
switch isused toturn offthe system, theVDC system
still operates toprevent onedrive wheel fromslipping
by transferring powertoanon slipping drivewheel.
The VDC warning light
flashes ifthis occurs. All
other VDCfunctions areoffand theVDC warning light
will not flash. TheVDC system isautomatically
reset toon when theignition switchisplaced inthe
ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning lightº
(P .2-14) andªVehicle Dynamic Control(VDC)off
indicator lightº(P.2-16) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº
noise and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)OFF
SWIT CH
GUID-A9257 017-A8BE-40D0-9E2E-32 15E14F5 026
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC
system reduces theengine outputtoreduce wheel
spin. Theengine speedwillbereduced evenifthe
accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC system off.
T o turn offthe VDC system, pushtheVDC OFFswitch.
The
indicator lightwillilluminate.
Push theVDC OFFswitch againorrestart theengine
to turn ONthesystem.
Starting anddriving
5-15
&RQGLWLRQ

Page 147 of 217



> (GLW   0RGHO &$@
5-20
Starting anddriving
GUID-6A1 A5448-1FA0-4D3C-BDDB-09F4 5F69CF96
Y our vehicle wasdesigned tobe used tocarry
passengers andluggage. NISSANdoesnotrecom-
mend trailertowing, because itplaces additional loads
on your vehicle's engine,drivetrain, steering,braking
and other systems.
CAUTION:
V ehicle damage resulting fromtowing atrailer is
not covered bythe warranty.
GUID-1DB80 F9D-14AE-4FF9-AFC1-4C5BE29AA 1C4
Y our new vehicle wasdesigned tobe used primarily to
carry passengers andluggage.
T owing atrailer willplace additional loadsonyour
vehicle's engine,drivetrain, steering, brakingandother
systems. Thetowing ofatrailer willexaggerate other
conditions suchassway caused bycrosswinds, rough
road surfaces orpassing trucks.
Y our driving styleandspeed mustbeadjusted
according tothe circumstances. Beforetowing a
trailer, seeaNISSAN dealerforanexplanation about
the proper useoftowing equipment.
OPERA TINGPRECAUTIONS
GUID-665723 55-FE0D-46B5-83A5-7 64AA319902 2
. Avoid towing atrailer during thebreak -inperiod.
. Before driving, makesurethatthelighting system
of the trailer works properly .
. Observe thelegal maximum speedsfortrailer
operation.
. Avoid abrupt starts,accelerations andstops.
. Avoid sharpturnsandlane changes.
. Always driveyourvehicle atamoderate speed.
. Follow thetrailer manufacturer's instructions.
. Choose propercoupling devices(trailerhitch,
safety chain,roofcarrier, etc.)foryour vehicle and
trailer. Thesedevices areavailable fromaNISSAN
dealer whereyoucan also obtain moredetailed
information abouttrailertowing.
. Never allowthetotal trailer load(trailer weight plus
its cargo weight) toexceed themaximum setfor
the vehicle andthecoupling device.Seea
NISSAN dealerformore information.
. Thetrailer mustbeloaded sothat heavy goods are
placed overtheaxle. Themaximum allowable
vertical loadonthe trailer hitchmust notbe
exceeded. .
Have yourvehicle serviced moreoftenthanatthe
intervals specified inaseparate maintenance
booklet.
. Trailer towing requires morefuelthan under
normal circumstances becauseofaconsiderable
increase intraction powerandresistance.
While towing atrailer, checktheengine coolant
temperature indicatortoprevent thevehicle
from overheating.
MAXIMUM LOAD LIMITS
GUID-23EAC 0D5-39B8-4746-9FCB-78 845754E7 F5
CA0011-A
Maximum trailerloads(including tiresandother loaded
equipment):
1. Never allowthetotal trailer loadtoexceed:
.
The maximum 750kg(1,654 lb)for atrailer
without brakes.
.
For MRA8DE enginemodel,themaximum
1,200 kg(2,646 lb)for atrailer withbrakes.
.
For MR16DD Tengine model,themaximum
1,100 kg(2,426 lb)for atrailer withbrakes.
2. The total trailer loadmust belower thanthe
following threevalues evenifit does notexceed
the maximum permissible trailerloads.
TRAILER TOWING (exceptfor
Australia andNew Zealand) TRAILER
TOWING (forAustralia and
New Zealand)
&RQGLWLRQ

Page 149 of 217



> (GLW   0RGHO &$@
5-22
Starting anddriving
GUID-EA B6A8C3- C092-41F6 -A582-7BF8 3E12921F
WARNING:
. Ifthe engine isnot running oristurned off
while driving, thepower assistforthe
steering willnotwork. Thesteering willbe
much harder tooperate.
. When theelectric powersteering warning
light illuminates withtheengine running, the
power assistforthe steering willcease
operation. You will still have control ofthe
vehicle butthesteering willbeharder to
operate.
The electric powersteering systemisdesigned to
provide powerassistwhiledriving tooperate the
steering wheelwithlight force.
When thesteering wheelisoperated repeatedly or
continuously whileparking ordriving atavery low
speed, thepower assistforthe steering wheelwillbe
reduced. Thisisto prevent overheating ofthe electric
power steering systemandprotect itfrom getting
damaged. Whilethepower assistisreduced, steering
wheel operation willbecome heavy.When the
temperature ofthe electric powersteering system
goes down, thepower assistlevelwillreturn tonormal.
Avoid repeating suchsteering wheeloperations that
could cause theelectric powersteering systemto
overheat.
Y ou may hear africative soundwhenthesteering
wheel isoperated quickly.However, thisisnot a
malfunction.
If the electric powersteering warninglight
illuminates whiletheengine isrunning, itmay indicate
the electric powersteering systemisnot functioning
properly andmay need servicing. Havetheelectric
power steering systemchecked byaNISSAN dealer.
(See ªElectric powersteering warninglightº(P.2-13) .)When
theelectric powersteering warninglight
illuminates withtheengine running, thepower assist
for the steering willcease operation. You will still have
control ofthe vehicle. However, greatersteering effort
is needed, especially insharp turnsandatlow speeds.
GUID-52 4F2163-875B -4D31-9A49-A2DA9D 150D31
The brake system hastwo separate hydraulic circuits.If
one circuit malfunctions, youwillstill have braking
ability attwo wheels.
BRAKE PRECAUTIONS
GUID-99 5F14BA-32 50-45E8-A4D 5-EFBD0B632895
V acuum assisted brakes
GUID-7AE 8E208-0576-4 BD2-8C93-C8FFF26A62C6
The brake booster aidsbraking byusing engine
vacuum. Ifthe engine stops,youcan stop thevehicle
by depressing thefoot brake pedal. However, greater
foot pressure onthe foot brake pedalwillberequired
to stop thevehicle. Thestopping distancewillbe
longer.
If the engine isnot running oristurned offwhile driving,
the power assisted brakeswillnot function. Braking
will beharder.
WARNING:
Do not coast withtheengine stopped.
For model withBrake Assist: Whenthebrake pedalis
depressed slowlyandfirmly ,you may hear aclicking
noise andfeelaslight pulsation. Thisisnormal and
indicates thattheBrake Assist System isoperating.
Using brakes
GUID-B3E 7B0F5-C532-4 3D1-8150-97FB7B385 CFC
Avoid resting yourfootonthe foot brake pedalwhile
driving. Thiswilloverheat thebrakes, wearoutthe
brake linings/pads faster,andincrease fuelconsump-
tion.
T o help reduce brakewearandtoprevent thebrakes
from overheating, reducespeedanddownshift toa
lower gearbefore goingdownaslope orlong grade.
Overheated brakesmayreduce braking performance
and could resultinloss ofvehicle control.
While driving onaslippery surface, becareful when
braking, accelerating ordownshifting. Abruptbraking
ELECTRIC POWERSTEERING
S Y STEM BRAKE
SY STEM
&RQGLWLRQ

Page 150 of 217



> (GLW   0RGHO &$@
or acceleration couldcause thewheels toskid and
result inan accident.
W et brakes
GUID-113 04DAE-D8A 1-41C5-9629 -EB4E233FA326
When thevehicle iswashed ordriven through water,
the brakes maygetwet. Asaresult, yourbraking
distance willbelonger andthevehicle maypulltoone
side during braking.
T o dry the brakes, drivethevehicle atasafe speed
while lightly depressing thefoot brake pedal toheat up
the brakes. Dothis until thebrakes returntonormal.
Avoid driving thevehicle athigh speeds untilthe
brakes function correctly.
Parking brakebreak-in
GUID-9F 650418-11 53-4519-A06 7-F7B1AB1F0389
Break inthe parking brakeshoes whenever the
stopping effectofthe parking brakeisweakened or
whenever theparking brakeshoes and/or drums/rotors
are replaced, inorder toassure thebest braking
performance.
This procedure isdescribed inthe vehicle service
manual andcanbeperformed byaNISSAN dealer.
Driving uphill
GUID-98F5 E8C2-2DFE-4 585-B8B6-542F87613 B7A
When starting onasteep grade, itis sometimes
difficult tooperate boththebrake andclutch (for
Manual Transmission model).Apply theparking brake
to hold thevehicle. Donot slip theclutch. Whenready
to start, slowly release theparking brakewhile
depressing theaccelerator pedalandreleasing the
clutch pedal.
Driving downhill
GUID-32139F 93-F218-4D2C-BC4E-B 0CC3241F2E9
The engine braking actioniseffective forcontrolling
the vehicle whiledescending hills.ForManual Trans-
mission (MT)model, theshift lever should beplaced in
the lower speed position priortodescending.For
Continuously Variable Transmission (CVT)model, the
manual shiftmode orthe ªLº position shouldbe
selected.
BRAKE ASSIST (ifequipped)
GUID-CDB FBD03-A9DF-438C-AF 95-F32FB9DAFFB2
When theforce applied tothe brake pedalexceeds a
certain level,theBrake Assist isactivated generating
greater braking forcethanaconventional brake
booster evenwithlight pedal force.
WARNING:
The Brake Assist isonly anaid toassist braking
operation andisnot acollision warningor
avoidance device.Itis the driver's responsibility
to stay alert, drivesafely andbeincontrol ofthe
vehicle atall times.
ANTI-L OCKBRAKING SYSTEM (ABS) (if
equipped)
GUID-C5C2B DDA-1861-49E4-A3EF -B800D31DBF5F
WARNING:
. The Anti-lock BrakingSystem(ABS)isa
sophisticated device,butitcannot prevent
accidents resultingfromcareless ordanger-
ous driving techniques. Itcan help maintain
vehicle control duringbraking onslippery
surfaces. Remember thatstopping distances
on slippery surfaces willbelonger thanon
normal surfaces evenwithABS. Stopping
distances mayalso belonger onrough,
gravel orsnow covered roads,orifyou are using
tirechains. Always maintain asafe
distance fromthevehicle infront ofyou.
Ultimately, thedriver isresponsible for
safety.
. Tire type andcondition mayalso affect
braking effectiveness.
Ð When replacing tires,install thespeci-
fied size oftires onallfour wheels.
Ð When installing aspare tire,make sure
that itis the proper sizeandtype as
specified onthe tire placard. (SeeªTire
placardº (P.9-9) .)
Ð For detailed information, seeªTires and
wheelsº (P.8-31) .
The Anti-lock BrakingSystem(ABS)controls the
brakes sothe wheels donot lock during hardbraking
or when braking onslippery surfaces. Thesystem
detects therotation speedateach wheel andvaries
the brake fluidpressure toprevent eachwheel from
locking andsliding. Bypreventing eachwheel from
locking, thesystem helpsthedriver maintain steering
control andhelps tominimize swerving andspinning
on slippery surfaces.
Using system
GUID-331 31E90-4EC6 -4CBB-B87D-88A622F21705
Depress thebrake pedalandhold itdown. Depress
the brake pedal withfirmsteady pressure, butdonot
pump thebrakes. TheABS willoperate toprevent the
wheels fromlocking up.Steer thevehicle toavoid
obstacles.
WARNING:
Do not pump thebrake pedal. Doingsomay
result inincreased stoppingdistances.
Starting anddriving
5-23
&RQGLWLRQ

Page 151 of 217



> (GLW   0RGHO &$@
5-24
Starting anddriving
Self-test feature
GUID-25A1 2632-42C1- 404E-B198-BDCF201D1 532
The ABS includes electronic sensors,electricpumps,
hydraulic solenoids andacomputer. Thecomputer has
a built-in diagnostic featurethattests thesystem each
time youstart theengine andmove thevehicle atalow
speed inforward orreverse. Whentheself-test
occurs, youmay hear aªclunkº noiseand/or feela
pulsation inthe brake pedal. Thisisnormal anddoes
not indicate amalfunction. Ifthe computer sensesa
malfunction, itswitches theABS offand illuminates the
ABS warning lightonthe instrument panel.Thebrake
system thenoperates normally,but without anti-lock
assistance.
If the ABS warning lightilluminates duringtheself-test
or while driving, havethevehicle checked bya
NISSAN dealer.
Normal operation
GUID-731 7FE84-7D F1-491B-AE 03-A1D3516 5D3DC
The ABS operates atspeeds above5to 10 km/h (3to
6 MPH) .The speed variesaccording toroad condi-
tions.
When theABS senses thatoneormore wheels are
close tolocking up,the actuator rapidlyapplies and
releases hydraulic pressure. Thisaction issimilar to
pumping thebrakes veryquickly .You may feela
pulsation inthe brake pedalandhear anoise from
under thehood orfeel avibration fromtheactuator
when itis operating. Thisisnormal andindicates that
the ABS isoperating properly.However, thepulsation
may indicate thatroad conditions arehazardous and
extra careisrequired whiledriving.
GUID-161 29265-62AC- 4A0C-9B39-4 8A5D69BB276
When leaving yourvehicle unoccupied:
. Always takethekey with you-even when leaving
the vehicle inyour owngarage.
. Close allwindows completely andlock alldoors.
. Always parkyourvehicle whereitcan beseen.
Park inawell litarea during thenight.
. Ifthe security systemisequipped, useit-even for
a short period.
. Never leavechildren orpets inthe vehicle
unattended.
. Never leavevaluables insidethevehicle. Always
take valuables withyou.
. Never leavethevehicle documents inthe vehicle.
. Never leavearticles onaroof rack. Remove them
from therack andkeep andlock them inside the
vehicle.
. Never leavethespare keyinthe vehicle.
GUID-EBC9 7F4F-D1CC-40F0-8EC6-B8EC419B4 084
WARNING:
. Whatever thecondition, drivewithcaution.
Accelerate anddecelerate withgreat care.If
accelerating ordecelerating toofast, the
drive wheels willlose even more traction.
. Allow morestopping distanceincold weath-
er driving. Braking shouldbestarted sooner
than ondry pavement.
. Keep atagreater distance fromthevehicle
in front ofyou onslippery roads.
. Wet ice(08C ,328F andfreezing rain),very
cold snow andicecan beslick andvery
difficult todrive on.The vehicle willhave a
lot less traction orgrip under thesecondi-
tions. Try to avoid driving onwet iceuntil the
road issalted orsanded.
. Watch forslippery spots(glaring ice).These
may appear onanotherwise clearroadin
shaded areas.Ifapatch ofice isseen ahead,
brake before reaching it.Try not tobrake
while actually onthe ice, and avoid any
sudden steering maneuvers.
. Donot use cruise control onslippery roads.
. Snow cantrap dangerous exhaustgasunder
your vehicle. Keepsnow clearofthe exhaust
pipe andfrom around yourvehicle.
VEHICLE SECURITY COLDWEATHER DRIVING
&RQGLWLRQ

Page:   < prev 1-10 11-20 21-30 31-40 next >