Menu button NISSAN QASHQAI 2010 Owner's Manual

Downloaded from www.Manualslib.com manuals search engine Removing a paired phone:
Deletes the connection between the Bluetooth®sys-
tem and the registered mobile phone.
Action Screen display
Briefly press <MENU>button
↓ [PHONE SETUP]
Press <ENTER> button
↓ [PAIRED LIST]
Turn <MENU/VOL> dial
↓ [DEL PHONE]
Press <ENTER> button
↓ Mobile 1
Turn <MENU/VOL> dial Mobile 2
↓
Press <ENTER> button [DELETE?] [YES]
↓
Press <ENTER> button * [DELETED]
↓ [DEL PHONE]
Press
mbutton repeatedly
for the main screen.
* For the “Mobile 2” connection the screen displays [
DISCONNECTED], followed by “Mobile 2”, then [DE-
LETED].
In the above example, “Mobile 2” will be deleted
while “Mobile 1” remains connected to the system. Bluetooth
®activation:
Activates or deactivates the Bluetooth®function.
You will need to activate the Bluetooth®function in
order to enable your hands-free phone system (ex-
cept in the pairing mode where it will be activated
automatically).
Action Screen display
Briefly press <MENU>button
↓ [PHONE SETUP]
Press <ENTER> button
↓ [PAIRED LIST]
Turn <MENU/VOL> dial [BLUETOOTH]
↓
Press <ENTER> button [B’TOOTH <OFF>]
↓
Turn <MENU/VOL> dial [B’TOOTH <ON>]
↓
Press <ENTER> button [BLUETOOTH]
[
m[CONNECT OK]
Mobile name
Main screen
Delete phone book list:
To delete all the contacts from the phone book, pro-
ceed as follows:
Action Screen display
Briefly press <MENU>but-
ton
↓ [PHONE SETUP]
Press <ENTER> button
↓ [PAIRED LIST]
Turn <MENU/VOL> dial [DEL P.BOOK]
↓
Press <ENTER> button [DEL ALL? <NO>]
↓
Turn <MENU/VOL> dial [DEL ALL? <YES>]
↓
Press <ENTER> button [DELETING]
↓ [DELETED]
[DEL P.BOOK]
Press
mbutton repeatedly
for the main screen.
Phone book
When the(phone book) button is pressed, the
following options can be selected by turning the
<MENU/VOL> dial in either direction.
[SEARCH]
Names (contact names)
Speed dial mode [1NAME]
Display screen, heater and air conditioner, and audio system4-47

Downloaded from www.Manualslib.com manuals search engine [DELETE NAME]
[EDIT NAME]
[ADD NAME]
Send name using Bluetooth®technology [ADD NAME]
The phone book can store up to 100 names with
numbers and can be selected for calling. To add a
contact to the phone book proceed as follows:
Action Screen display
Press with a long press the
mbutton ↓ [ADD NAME]
Press <ENTER> button
↓ [ENTER NAME]
Turn <MENU/VOL> dial [ABC]
↓ Focus on “J” [IJK]
Press <ENTER> button
↓
Turn <MENU/VOL> dial
Focus on “O” [NOP]
↓
Press <ENTER> button
↓*1 *3 [JO]
Turn <MENU/VOL> dial [OK <@OKA>]
↓
Press <ENTER> button
↓ [ENTER NUMBER]
Press <ENTER> then turn
<MENU/VOL> dial 1
↓ *2 *3
Press <ENTER> button [123456789]
↓
Turn <MENU/VOL> dial
↓ [OK <@OK0>]
Action Screen display
↓ [OK <@OK0>]
Press <ENTER> button [SAVED]
Press
mbutton for the main
screen.
NOTE
In the above example the contact name JO and
phone number 123456789 will be added.
*1 To insert special characters select the following char-
acter options A: Alphabetic characters, 1/2: Numerical
characters, Ä: Latin characters and @: Symbol charac-
ters.
*2 Select the number then confirm your selection by press- ing the <ENTER> button then proceed likewise for ev-
ery number.
*3 To correct an entry, briefly press the
(back) button
then enter the correct details. To delete all characters
press the
(back) button for more than 1 second.
NOTE
You can also store the name and the phone
number in one of the six preset buttons on the
audio unit for frequent use phone numbers.
Transferring an entry to the Phone book:
You can also send a name (contact) from a con-
nected mobile phone to the phone book using Blue-
tooth
®technology.
4-48Display screen, heater and air conditioner, and audio system

Downloaded from www.Manualslib.com manuals search engine ActionScreen display
Briefly press
mbutton
↓ [SEARCH]
Turn <MENU/VOL> dial
[
mADD NAME]
↓
Press <ENTER> button [SEND NAME]
↓ *1 *2 [JOE]
↓ *3 [0123456789]
Press <ENTER> button
↓ [SAVE? <YES>]
Press <ENTER> button
↓ *4 [SAVED]
[SEND NAME]
Press
mbutton repeat-
edly for the main screen.
*1 The Bluetooth
®icon will blink for 2 minutes.
*2 Send the name (contact) via the registered mobile phone within the 2 minutes.
*3 Phone number is displayed.
*4 During the saving operation, the Bluetooth
®connection
will be temporarily disconnected.
EDIT:
You can edit a name or phone number stored in the
phone book.
Action Screen display
Briefly press
mbutton
↓ [SEARCH]
Turn <MENU/VOL> dial
↓ [EDIT NAME]
Press <ENTER> button
↓*1 [SEARCH]
Turn <MENU/VOL> dial [JOE]
↓
Press <ENTER> button
↓ [JOE OK <@OKA>]
Turn <MENU/VOL> dial
↓ Focus on “Y” [JOE <XYZ>]
Press <ENTER> button
↓ *2 [JOEY]
Turn <MENU/VOL> dial
↓ *3 [OK <@OKA>]
Press <ENTER> button
↓ [EDIT NUMBER]
[OK <@OK0>]
Press <ENTER> button
↓
Action Screen display
↓ [SAVED]
[EDIT NAME]
Press
mbutton for the main
screen.
*1 Alternatively use the search mode to select the appro- priate entry to edit.
— [SEARCH] appears on the display then press the <ENTER> button.
— Turn the <MENU/VOL> dial to select the first char-
acter of the name then press the <ENTER>button.
— The name should be displayed. If necessary, turn the<MENU/VOL> dial to select the correct name.
*2 When the
button is pressed briefly, the cursor will
move one step backwards and the last character will be
deleted. To delete all characters press the
button
for more than 1 second.
*3 If necessary, you can edit the telephone number. After editing the name, select [OK] then press the <ENTER>
button to confirm and edit the number as described for
name editing.
Display screen, heater and air conditioner, and audio system4-49

Downloaded from www.Manualslib.com manuals search engine Delete a name:
To delete a name (contact) from the phone book,
proceed as follows:
ActionScreen display
Briefly press
mbutton
↓ [SEARCH]
Turn <MENU/VOL> dial
↓ [DELETE NAME]
Press <ENTER> button
↓*1 [SEARCH]
Turn <MENU/VOL> dial [JOE]
↓
Press <ENTER> button
↓ [DELETE ? <YES>]
Press <ENTER> button
↓ [DELETED]
Press
mbutton for the main screen.
*1 Alternatively use the search mode to select the appro- priate entry to delete.
— [SEARCH] appears on the display then press the <ENTER> button.
— Turn the <MENU/VOL> dial to select the first char-
acter of the name then press the <ENTER>button.
— The name should be displayed. If necessary, turn the<MENU/VOL> dial to select the correct name.
Speed dial buttons:
After entering the names and phone numbers, you
can assign the six preset buttons to the most fre-
quently dialled phone numbers.
1) Press the
(phone book) button.
2) Select the name by turning the <MENU/VOL>
dial or using the search name mode.
3) Once found, press the assigned preset button until a confirmation beep is heard. The name and
phone number is now stored under that button.
Hands-free telephone control
The hands-free mode can be operated using the
telephone button controls on the audio unit or on the
steering wheel (where fitted).
Initiating a call:
A call can be initiated using one of the following
methods:
– redial
– phone book
– voice tag
– speed dial (preset buttons)
NOTE
During the active call you can adjust the micro-
phone volume by pressing briefly on the <MENU>
button then adjust the volume by turning the
<MENU/VOL> dial within the value range of —2 to +2. To confirm the entry, press briefly on the
<ENTER> or
(Back) button or wait for 10 sec-
onds to return to the active call main screen.
Redial:
Use the redial mode to call the last number that was
dialled.
1) Press the
(phone) button briefly.
2) Select [REDIAL].
3) Press the <ENTER>or the
(phone) button to
redial the last number.
Make a call from the phone book:
In order to dial a contact from the phone book, pro-
ceed as follows:
1) Press the phone book (
) button.
2) Turn the <MENU/VOL> dial and select the cor-
respondent name.
3) Press the <ENTER>or
(phone) button in or-
der to dial the number.
Alternatively you can use the search mode as fol-
lows:
1) Briefly press the phone book (
) button.
2) [SEARCH] appears on the display then press the <ENTER> button.
3) Select the first character of the name then the <ENTER> button.
4) The name should be displayed.
4-50Display screen, heater and air conditioner, and audio system

Downloaded from www.Manualslib.com manuals search engine If necessary, turn the<MENU/VOL>dial to se-
lect the correct name.
5) Press the <ENTER>or
(phone) button in or-
der to dial the number.
Calling via voice tag:
If your mobile phone supports voice recognition, it is
possible to make a call via the voice tag instead of
manual selection, provided the name and number of
your contact has been previously marked and stored
in the phone book of your mobile phone. For details,
see the mobile phone manufacturer’s owner’s
manual.
In order to dial via a voice tag, proceed as follows:
1) Press the
(phone) button for more than 2 sec-
onds.
2) The display shows [SPEAK NOW].
3) Give your voice tag. Say the voice tag clearly and normally in the di-
rection of the microphone (located in ceiling in
front of the rear view mirror).
4) If the voice tag is correct, the phone system will dial the corresponding number.
Make a call via speed dial:
To make a speed dial call using one of the assigned
preset buttons, proceed as follows:
1) Press the
(phone) button briefly.
2) Press the corresponding preset button (1–6). Alternatively, you can select the corresponding
preset number by turning the
<MENU/VOL>dial
instead of pressing the preset button.
Receiving a call
When receiving an incoming call, the display will
show the caller identification (or [NO NUMBER])
and you can:
answer the call by pressing briefly on the(phone) button.
end the call after the conversation by pressing
thebutton.
reject the call by pressing thebutton.
Steering wheel switch (where fitted)
j
A Telephone button
jB Volume control buttons
The hands-free mode can be operated using the
controls on the steering wheel. Volume control buttons:
The volume control buttons allows you to adjust the
volume of the speakers by pressing the + or – but-
ton.
Telephone button:
The phone (
) button allows you to:
accept an incoming call by pressing the phone
() button once.
reject an incoming call when the phone () but-
ton is pressed for more than 2 seconds during
the incoming call.
end an active call by pressing the phone () but-
ton once.
redial the last outgoing call by pressing the phone
() button twice.
make a speed dial call by pressing the phone
() button then push the scrolling (up/down)
switch to scroll through the preset buttons for
the stored phone numbers. To confirm the selec-
tion press the phone (
) button to make the call.
make a call via voice dialling by pressing the
phone () button for more than 2 seconds then
say the voice tag clearly.NAA998Z
Display screen, heater and air conditioner, and audio system4-51

Downloaded from www.Manualslib.com manuals search engine BLUETOOTH® settings
To setup the Bluetooth system to pair (connect or
register) your preferred mobile phone, push the
<SETUP>button, select the [Bluetooth] key, and
then push the <ENTER>button. It is also possible to
enter the setup menu directly via the <
> (phone)
button.
The following options can be selected:
[Pair Device]
Bluetooth mobile phones can be paired with the
system. A maximum of 5 Bluetooth mobile
phones can be registered.
[Select Device]
Paired Bluetooth mobile phones (
) are listed
on the display and can be selected for connec-
tion.
[Delete Device]
A registered Bluetooth mobile phone can be de-
leted.
[On]/[Off]
If this setting is turned off, the connection be-
tween the Bluetooth devices and the in-vehicle
Bluetooth module will be cancelled.
For details, see “BLUETOOTH® settings” earlier in
this section.
When successfully paired, a notification message
will be displayed. During the connection the follow-
ing status icons will be displayed (top left of dis- play): Signal strength (
), Battery status (), and
Bluetooth ().
*: If the low battery message comes on, the Blue-
tooth® device must be recharged soon.
HANDS-FREE TELEPHONE
CONTROL
The hands-free mode can be operated using the
telephone <>button on the audio system, or
(where fitted) on the steering wheel.
Initiating a call
A call can be initiated using one of the following
methods:
– Redial
– Phone book
– Manual dialling
– Missed calls
– Dialled calls
– Received calls Redial:
To redial or call the last number dialled, press
<
>
for more than 2 seconds.
Making a call from the phone book:
Once the Bluetooth
®connection has been made,
between the registered mobile phone and the audio
system, phone book data will be transferred auto-
matically to the audio system. The transfer may take
a while before completion.
NOTE
Phone book data will be erased when:
Switching to another registered mobile
phone.
Mobile phone is disconnected.
The registered mobile phone is deleted from
the audio system.
1. Press <
>.
NAA1199
Display screen, heater and air conditioner, and audio system4-53

Downloaded from www.Manualslib.com manuals search engine Receiving a call
When receiving an incoming call, the display will
show the caller’s phone number (or a notification
message that the caller’s phone number cannot be
shown):
Answer the call by pressing<>briefly, or press
<ENTER>.
End the call, after the conversation, by:
– Pressing <
>briefly again.
– Pressing <ENTER>when the [
] symbol is
highlighted.
If [
] is not highlighted, turn the <TUNE/
MENU> dial to [], and press <ENTER>.
Reject the call by pressing <>with a long press
or select [] from the incoming call screen.
During a call:
During a call, by scrolling and pressing <ENTER>,
you can select the following options:
[#123] — Use this item to enter numbers during
a call. For example, if directed by an automated
phone system to dial an extension number the
system will send the tone associated with the
selected number.
[] — Use this item (the transfer handset com-
mand) to transfer the call from the audio system
to your mobile phone.
To transfer the call back to hands-free via the
audio system select [
].
STEERING WHEEL SWITCHES
(where fitted)
j
A Telephone button
jB Volume control buttons
The hands-free mode can be operated using the
steering wheel switches.
Volume control buttons
The volume control buttons allow you to adjust the
volume of the speakers by pressing the <+>or<
—> button.
Telephone button
The phone <> button allows you to:
Accept an incoming call by pressing <>once.
Reject an incoming call by pressing <>for
more than 2 seconds during the incoming call.
End an active call by pressing the <>button
once.
Redial the last outgoing call by pressing the <>
button for more than 2 seconds.
NAA1200
NAA998Z
Display screen, heater and air conditioner, and audio system4-55

Downloaded from www.Manualslib.com manuals search engine STOP/START SYSTEM OFF SWITCH
The system can be temporarily disengaged by
pressing the Stop/Start System OFF switch. Press-
ing the button a second time will re-engage the
Stop/Start System.
When the Stop/Start System is disengaged
whilst the engine is running, the engine is pre-
vented from automatically stopping.
When the Stop/Start System is disengaged af-
ter the engine has been automatically stopped
by the Stop/Start System, the engine will imme-
diately restart if suitable conditions are present
as described under NORMAL OPERATION.
The engine will then be prevented from automati-
cally stopping during the same journey.
Whenever the Stop/Start System is disengaged
the indicator light on the Stop/Start System OFF
switch illuminates. In this condition the Stop/Start System cannot prevent unnecessary fuel
consumption, exhaust emissions, or noise dur-
ing your journey.
NOTE
The following messages may be displayed for a
few seconds in the vehicle information display
when the Stop/Start System OFF switch is
pressed. Stop/Start System
disengaged
m
Stop/Start System
re-engaged
m
More information about the Stop/Start System can
be checked using the [Settings] menu (see Instru-
ments and Controls)
ENVIRONMENTAL SAVINGS
The vehicle information display keeps a record of
the CO2 savings that can be viewed via the [Set-
tings] menu.
See “Vehicle information display” in the “2. Instru-
ments and controls” section for information about
the display. – [Trip Saving]
Estimated CO2 exhaust emissions prevented
since last reset.
NOTE
The [Trip Saving] value is the same informa-
tion that is displayed when the engine is auto-
matically stopped by the Stop/Start System.
NIC1641
NIC1642
NIC1643
Starting and driving5-23