pairing phone NISSAN QASHQAI 2015 Owner´s Manual

The pairing procedure and operation may vary ac-
cording to device type and compatibility. See the
Bluetooth® owner’s manual for further details.
NOTE
•For device details, see your audio/mobile
phone Owner’s Manual.
•For assistance with the Bluetooth® audio/
mobile phone integration, please visit your lo-
cal NISSAN dealer.
To set up the Bluetooth system with a device the
following items are available:
•[Scan devices]
Bluetooth devices can be paired with the sys-
tem. A maximum of 5 Bluetooth devices can be
registered.
•[Pair device]
Bluetooth devices can be paired with the sys-
tem. A maximum of 5 Bluetooth devices can be
registered.
•[Sel. device]
Paired Bluetooth devices are listed and can be
selected for connection.
•[Del. device]
A registered Bluetooth device can be deleted.
•[Bluetooth]
If this setting is turned off, the connection be-
tween the Bluetooth devices and the in-vehicle
Bluetooth module will be cancelled.
[Scan devices]:
1) Press the
button. Select [Scan device]
The audio unit searches bluetooth devices and
shows all visible devices.
Make sure your Bluetooth device is visible at this
time.
2) Select the device to be paired.
Use the<MENU>dial and press to select.
3) The pairing procedure may depend on the de-
vice to be connected:
1) Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible
depending on the device:
– Type A:
The message [To pair] [Enter Pin] 0000
will be displayed.
Confirm the PIN code on the device.
The Bluetooth connection will be made.– Type B:
The message [Pairing request] [Confirm
password] together with a 6 digit code
will be displayed. The unique and identi-
cal code should be displayed on the de-
vice. If the code is identical confirm on the
device.
The Bluetooth connection will be made.
[Pair device]:•Turn the audio unit Bluetooth® on. See [Blue-
tooth] description.
•Use the audio unit to pair:
Press thebutton. Select the [Pair Device]
key.
The pairing procedure depends on the Blue-
tooth® device to be connected:
1) Device without PIN code:
The Bluetooth® connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible
depending on the device, for the correct pro-
cedure details, see “[Scan devices]” earlier
in this section.
•Use the Bluetooth® audio/mobile phone device
to pair:
1) Follow the instructions in the owner’s manual
for the Bluetooth® enabled device to search
for the audio unit.
If the search mode finds the audio unit it will
be shown on the device display.
Display screen, heater and air conditioner, and audio system4-33

In order to use your mobile phone with the Blue-
tooth®of the audio system, the mobile phone must
first be setup. For details, see “BLUETOOTH®
settings” later in this section. Once it has been
setup, the hands-free mode is automatically acti-
vated on the registered mobile phone (via Blue-
tooth
®) when it comes into range.
A notification message appears on the audio display
when the phone is connected, when an incoming
call is being received, as well as when a call is initi-
ated.
When a call is active, the audio system, microphone
(located in the ceiling in front of the rear view mir-
ror), and steering wheel switches enable hands-free
communication.
If the audio system is in use at the time, the radio,
CD, iPod, USB audio, Bluetooth audio or AUX
source mode will be muted and will stay muted until
the active call has ended.
The Bluetooth
®system may not be able to connect
with your mobile phone for the following reasons:
•The mobile phone is too far away from the ve-
hicle.
•The Bluetooth®mode on your mobile phone has
not been activated.
•Your mobile phone has not been paired with the
Bluetooth®system of the audio unit.
•The mobile phone does not support Bluetooth®
technology (BT Core v2.0).NOTE
•For models with NissanConnect (Audio with
Navigation system) see the separately pro-
vided Owner’s Manual.
•For details, see your mobile phone’s Owner’s
Manual.
•For assistance with your mobile phone inte-
gration, please visit your local NISSAN dealer.
j1Phone book quick search buttonA-Z
j2(Back) button
j3Phone button
j4<MENU>or<ENTER>button (rotate and
push to select)
BLUETOOTH® settings
Enter the phone setup menu via the(phone)
button, select the [Bluetooth] key, and then check if
the bluetooth is set to on (default setting is on, push
the<ENTER>button if not).To setup the Bluetooth system to pair (connect or
register) your preferred mobile phone, follow the fol-
lowing procedure.
To pair a device, use the [Scan device] key or the
[Pair device] key.
Up to 5 different Bluetooth devices can be con-
nected. However, only one device can be used at a
time. If 5 different Bluetooth registered devices are
registered, a new device can only replace one of the
5 existing paired devices. Use [Del. device] key to
delete one of the existing paired devices. For de-
tails, see “BLUETOOTH® settings” later in this sec-
tion.
When successfully paired a notification message
will be displayed, then the audio system display will
return to the current audio source display. During
connection the following status icons will be dis-
played (top left of the display): Signal strength
(
), Battery status* () and Bluetooth “ON”
().
*: If the low battery message comes on, the Blue-
tooth® device must be recharged soon.
The pairing procedure and operation may vary ac-
cording to device type and compatibility. See the
Bluetooth® owner’s manual for further details.
NOTE
•For device details, see your audio/mobile
phone Owner’s Manual.
•For assistance with the Bluetooth® audio/
mobile phone integration, please visit your lo-
cal NISSAN dealer.
NAA1398
4-40Display screen, heater and air conditioner, and audio system

•A maximum of 5 Bluetooth devices can be
paired with the system.
To set up the Bluetooth system with a device the
following items are available:
•[Scan device]
Shows all available visible Bluetooth devices and
initializes Bluetooth connection from the audio
unit.
•[Pair device]
Initializes Bluetooth connection from the mobile
device.
•[Sel. device]
Paired Bluetooth devices are listed and can be
selected for connection.
•[Del. device]
A registered Bluetooth device can be deleted.
•[Bluetooth]
If this setting is turned off, the connection be-
tween the Bluetooth devices and the in-vehicle
Bluetooth module will be cancelled.[Scan devices]:
1) Press the
button. Select [Scan device]
The audio unit searches bluetooth devices and
shows all visible devices.
Pressing the
button cancels the search.
2) Select the device to be paired.
Use the<MENU>dial and press to select.
3) The pairing procedure depends on the device to
be connected:
1) Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible
depending on the device:
– Type A:
The message [To pair] [Enter Pin] 0000
and a count down timer will be displayed.
Confirm the PIN code on the device.
The Bluetooth connection will be made.
If the count down timer reaches 0 the at-
tempt to pair the devices will be cancelled.
– Type B:
The message [Pairing request] [Confirm
password] together with a 6 digit code
will be displayed. The unique and identi-
cal code should be displayed on the de-
vice. If the code is identical confirm on the
device.
The Bluetooth connection will be made.[Pair device]:
•Turn the audio unit Bluetooth on. See [Bluetooth]
description.
•Use the audio unit to pair:
Press thebutton. Select the [Pair device]
key. The Audio unit will wait for a connection
request from the mobile device.
The pairing procedure depends on the Bluetooth
device:
1) Device without PIN code:
The Bluetooth connection will be automati-
cally connected without any further input.
2) Device with PIN code:
Two different ways of pairing are possible
depending on the device, see under [Scan
device] for a description.
•Use the Bluetooth® audio/mobile phone device
to pair:
1) SwitchONthe Bluetooth® devices search
mode on the mobile device.
If the search mode finds the audio unit it will
be shown on the device display.
2) Select the audio unit shown as [My Car].
3) Enter the number code shown on the rel-
evant device with the device’s own keypad,
and press the confirmation key on the device
itself.
Refer to the relevant Bluetooth® device own-
er’s manual for further details.
Display screen, heater and air conditioner, and audio system4-41