light NISSAN QUEST 2006 V42 / 3.G Navigation Manual

NAI0402
CONTROL PANEL
Armada, Maxima, Murano, Pathfinder,
Quest, Titan&1<
> (DAY/NIGHT):
Push to switch between the day screen and
the night screen.
&2<BACK>/<PREV> :
Push to return to the previous screen. In a
settings screen, this button can also be used to apply the setting.
&3JOYSTICK and
<ENTER>:
Push to highlight an item on the screen,
select the highlighted item, move on the
map, etc.
&4<SETTING> :
Push to access the system settings.
&5<TRIP> :
Push to display the vehicle information.
Refer to the Owner’s Manual of your vehicle.
&6<DEST> :
Push to enter a destination. Various methods
for entering a destination are available.“4. Setting a destination”.
&7<ROUTE> :
Push to access guidance control functions
(guidance cancellation, route priority, way-
point setting on the route, etc.) .
&8<MAP>:
Push to display the current location map
screen.
&9<GUIDE VOICE> :
Push to repeat voice guidance for a guide
point.
&10
<
> (ZOOM IN/ZOOM OUT):
Push to switch to the zoom mode to change
the map scale.
Getting started
2-3

NAI0403
350Z&1<MAP>:
Push to display the current location map
screen.
&2<DEST>:
Push to enter a destination. Various methods
for entering a destination are available.“4. Setting a destination”.
&3<ROUTE> :
Push to access guidance control functions
(guidance cancellation, route priority, way-
point setting on the route, etc.) .
&4JOYSTICK and <ENTER>:
Push to highlight an item on the screen,
select the highlighted item, move on the
map, etc.
&5<INFO> :
Push to display the navigation information,
such as GPS and version information, etc.
&6<SETTING> :
Push to access the system settings.
&7<VOICE> :
Push to repeat voice guidance for a guide
point.
&8<ZOOM IN>/<ZOOM OUT> :
Push to switch to the zoom mode to change
the map scale.
&9<BACK> :
Push to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
&10
<
> (DAY/NIGHT):
Push to switch between the day screen and
the night screen. Push and hold to toggle
the display on and off.
2-4
Getting started

NAV2701
1. The navigation system starts when theignition switch is turned to the ACC or ON
position.
NAV2702
Armada, Maxima, Murano, Pathfinder, Quest, Titan2. As the start-up screen is displayed, read the
precautions carefully, highlight [OK] and
push <ENTER> .
NAV3022
350Z
INFO:
If you do not push <ENTER>for more than 30
seconds, the status screen will be displayed.
Push <DEST>, <MAP>,
<ROUTE> ,
<INFO> ,
<SETTING> or
<TRIP> to return
to the start-up screen.
START-UP SCREEN
Getting started
2-7

NAI0406
MENU SCREENS AND THEIR PUR-
POSESPush<DEST> ,
<ROUTE> ,
<TRIP> ,
<INFO>
or <SETTING> to display the corresponding
menu screen.How to select a menu itemExample: <DEST> screen
1. Tilt the joystick up and down. An item is highlighted accordingly.
2. To select the preferred menu item, highlight the item and push <ENTER>.
INFO:
Some items in the menu contain further
details, which are displayed on the right side
of the screen when the menu item is
highlighted. This allows you to preview
details of the item. These details appear
only on the menu screen displayed by
pushing <DEST>
.
MENU SCREEN TYPES AND HOW
TO OPERATE2-8
Getting started

NAI0407
USING CONTROLS TO ADJUST VA-
LUES, LEVELS, ETC.Use the joystick to adjust the volume of the voice
guidance and the display brightness.How to adjust1. Highlight the preferred setting item andpush <ENTER> . The color of the corre-
sponding adjustment item changes.
2. Use the joystick, and the value or bar indicating levels increases or decreases
accordingly.
3. Push <ENTER> or
<BACK> /
<PREV> to
apply the setting.
2-10
Getting started

NAV2711
SWITCHING MAP VIEW1. Push<ENTER> while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push <ENTER>
.
NAV2713
3. Highlight the preferred map view and push
<ENTER> . The indicator of the selected
map view illuminates.
“SWITCHING THE MAP VIEW”
(page 3-4)
4. Push <MAP>to return to the current
location map screen.
Getting started
2-17

INFO:
. When you select a map view, a preview of
that view is displayed on the right side of the
screen.
. You can also switch the map view using the
following procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER> .
3) Highlight [Map View] and push <ENTER> .
2-18
Getting started

HOW TO STORE YOUR HOMEIf your home location is already stored in the
Address Book, it can be easily retrieved to set
the route to your home.
The procedure to store your home location is the
same as for storing any other location.
“4. Setting a destination”
As an example, the procedure for storing your
home location by searching for a destination by
address is described here.
NAI0410
1. Push <DEST>
.
NAV2714
2. Highlight [Address Book] and push
<ENTER> .
STORING YOUR HOME LOCATION/
ADDRESS
Getting started
2-21

NAV2715
3. Highlight [Home Location (Add New)] andpush <ENTER> .
NAV3023
4. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
NAV3048
5. Highlight [Street Address] and push
<ENTER> . A character input screen is
displayed.
2-22
Getting started

NAV3049
6. Enter the address of your home, highlight[OK] and push <ENTER>.
The map screen is displayed.
“SETTING A STREET ADDRESS”
(page 4-5)
NAV3050
7. Using the joystick, adjust your home loca- tion.
8. After adjusting the location, push <ENTER> .
NAV3051
9. A message is displayed and your home
location is stored.
10. Push <MAP>to return to the current
location map screen.
The home icon is displayed on the map.
INFO:
You can also perform the same setting by
pushing <SETTING> and selecting [Naviga-
tion].“STORING A LOCATION BY SEARCH-
ING” (page 6-2)
Getting started
2-23