NISSAN QUEST 2007 V42 / 3.G Navigation Manual

&11<CANCEL>:
Push to return to the map screen or cancel
the route that has already been set.
Getting started2-5

NAV2701
1. The navigation system starts when the
ignition switch is turned to the ACC or ON
position.
NAV2702Armada, Maxima, Murano, Pathfinder, Quest, Titan
2. As the start-up screen is displayed, read the
precautions carefully, highlight [OK] and
push<ENTER>.
NAV3022350Z
INFO:
If you do not push<ENTER>for more than 30
seconds, the status screen will be displayed.
Push<DEST>,<MAP>,<ROUTE>,
<INFO>,<SETTING>or<TRIP>to return
to the start-up screen.
START-UP SCREEN
2-6Getting started

NAI0406
MENU SCREENS AND THEIR PUR-
POSES
Push<DEST>,<ROUTE>,<TRIP>,<INFO>
or<SETTING>to display the corresponding
menu screen.
How to select a menu item
Example:<DEST>screen
1. Tilt the joystick up and down. An item is
highlighted accordingly.
2. To select the preferred menu item, highlight
the item and push<ENTER>.
INFO:
Some items in the menu contain further
details, which are displayed on the right side
of the screen when the menu item is
highlighted. This allows you to preview
details of the item. These details appear
only on the menu screen displayed by
pushing<DEST>.
MENU SCREEN TYPES AND HOW
TO OPERATE
Getting started2-7

NAV3061
3. Depending on the item you selected, a
detailed menu screen, a character input
screen or a setting screen, etc. is displayed.
On the screen displayed, make adjustments,
input information, etc. accordingly.
NAV2704
4. Push<BACK>/<PREV>to return to the
previous screen without applying any
changes.
Push<MAP>to return to the current
location map screen without applying any
changes.
INFO:
Depending on the menu selected, pushing
<MAP>may not return you to the current
location map screen.
2-8Getting started

NAI0407
USING CONTROLS TO ADJUST VA-
LUES, LEVELS, ETC.
Use the joystick to adjust the volume of the voice
guidance and the display brightness.
How to adjust
1. Highlight the preferred setting item and
push<ENTER>. The color of the corre-
sponding adjustment item changes.
2. Use the joystick, and the value or bar
indicating levels increases or decreases
accordingly.
3. Push<ENTER>or<BACK>/<PREV>to
apply the setting.
Getting started2-9

NAV2705
MAP MENU SCREEN
Push<ENTER>while the current location map
screen or a scrolled map screen is displayed to
display the menu corresponding to that screen.
This menu allows you to quickly use helpful
functions, such as setting a destination easily
and searching for facilities nearby.
To select a menu item, use the method
described in “Menu screen types and how to
operate”.
Current location map screen
If<ENTER>is pushed while the current
location map screen is displayed, the following
options are available.
.Store Location:
Allows you to store the current vehicle
location in the Address Book. The stored
location can be retrieved as necessary to set
it as a destination (waypoint) .
“STORING A LOCATION” (page 6-2).Nearby:
Allows you to search for points of interest
near the current vehicle location, such as
restaurants and gas stations, etc.
“SETTING A NEARBY PLACE”
(page 4-47)
.Map View:
Switches the map type. It is used to switch
between Plan View and Birdview
TMand set
the left screen display.
“SWITCHING THE MAP VIEW”
(page 3-4)
.Heading:
Switches the orientation of the map. “North
Up” or “Heading Up” are the available
options.
“SETTINGS OF HEADING/LONG
RANGE MAP VIEW” (page 3-15)
.Landmark Icons:
Allows you to display certain points of
interest near the current vehicle location on
the map, such as restaurants and gas
stations, etc.
“DISPLAYING LANDMARK ICONS”
(page 3-22)
2-10Getting started

.Store Tracking:
Allows you to store in the Address Book the
route that you have travelled from the
starting point to the current location.
“STORING A TRACKED ROUTE”
(page 6-14)
Getting started2-11

NAV2706
Scrolled location map screen
If<ENTER>is pushed while a scrolled map
screen is displayed, the following options are
available.
.New Dest:
Allows you to set the destination to the
location where you pushed<ENTER>.Ifa
destination is already set, the location will be
set as the new destination.
“SETTING FROM MAP” (page 4-20).Add to Route:
Allows you to set the location where you
pushed<ENTER>as the destination or a
waypoint.
This is available only when the suggested
route is already set.
“Setting a destination or waypoint”
(page 5-20).Nearby:
Allows you to search for points of interest
near the location where you pushed
<ENTER>and set it as a destination or
waypoint.
Use the same search method as the one for
POI.
“SETTING A NEARBY PLACE”
(page 4-47)
.Store Location:
Allows you to store the location where you
pushed<ENTER>in the Address Book.
The stored location can be retrieved to set it
as a destination or waypoint.
“STORING A LOCATION” (page 6-2)
.Delete:
Allows you to delete a stored location,
destination or waypoint. To delete it, place
the cross pointer over the corresponding
icon.
2-12Getting started

NAV2707
To ensure safe driving, some functions cannot
be operated while driving.
The on-screen functions that are not available
while driving will be “grayed-out” or muted.
Park the vehicle in a safe location and then
operate the navigation system.
FUNCTIONS DISABLED WHILE
DRIVING
Getting started2-13

NAV2708
HOW TO VIEW MAP SCREEN
The navigation system displays various informa-
tion on the map screen.
Screen information
&1Vehicle icon:
Indicates the current vehicle location and
the direction that you are traveling.
&2Guide point:
Indicates a guide point on the route.
&3GPS indicator:
Indicates the GPS reception condition of
signals from the satellites.
*Green: positioning is possible
*Gray: positioning is not possible
&4Remaining time and distance to the
destination:
Indicates the remaining time and distance to
the destination.
&5Suggested route:
Appears in bold yellow during route gui-
dance.
&6/Direction indicator:
Indicates the direction of the map.
&7Scale indicator:
Indicates the scale of the map.
&8Arrow and distance:
Appears on the upper left corner of the
screen when the suggested route is set.
Indicates the distance to the next guide
point and the turning direction at that guide
point. This function can be turned on or off.
INFO:
.Roads with a width of 10 ft (3 m) or less may
not be displayed on the map.
.The system may require a long time for
positioning. The GPS indicator may remain
gray for 3 to 4 minutes after the system is
started. This is not a malfunction.
OPERATING MAPS
2-14Getting started