NISSAN QUEST 2012 RE52 / 4.G 08IT Navigation Manual

Black plate (102,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
5-18
Route guidance
1. Push <ROUTE> .
2. Highlight [Edit/Add to Route] and push <ENTER> .
3. Highlight the preferred section of the route to the destination or waypoint and push
<ENTER> .4. Highlight the preferred condition and push
<ENTER> .
Available conditions:
: [Fastest Route]: [Minimize Freeway]: [Shortest Route]
5. The condition has been changed and the display returns to the [Edit/Add to Route]
screen.6. By highlighting [Calculate] and pushing<ENTER> , the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
present location screen.
INFO:
. The recalculated route may not be the
shortest route because the system priori-
tizes easy-to-drive roads for safety reasons.
. If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions are
set for different sections in [Edit/Add to
Route].
CONFIRMING ROUTEWhen the suggested route is displayed after
calculation, the route information can be con-
firmed or the suggested route simulated.

Black plate (103,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
Basic operation1. Push <ROUTE> .
2. Highlight [Route Info] and push <ENTER>.3. Highlight the preferred item and push
<ENTER> .
Available items: . [Turn List]:
Displays the details of the suggested route.
“Using turn list” (page 5-19)
. [Preview]:
The system will trace the planned route
going forward or in reverse.“Using route preview” (page 5-19)
. [Simulation]:
Simulate the suggested route. This function
provides a detailed image of the route with
voice guidance.“Confirming route by simulation” (page 5-20)
. [Store Route]:
A calculated route can be stored. A max-
imum of 5 routes can be stored. Stored
routes can be easily retrieved and set as the
suggested route.
“Storing route” (page 6-5)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
The same screen as when [Map Scroll] is
touched can be displayed with the following
operations:
— Touching the map screen.
— Pushing the directional buttons except for the up/down buttons (multi-function
controller with directional buttons) .
— Pushing the slide switch except in the upward/downward direction (multi-func-
tion controller without directional but-
tons) .
Using turn list1. Highlight [Turn List] and push <ENTER>.
2. The information (e.g., intersections) can be confirmed on the route to the destination by
scrolling the screen pushing the up and
down switches of the main directional
buttons, pushing the slide switch upward
or downward or rotating the center dial.
3. Push <MAP>to return to the current
location map screen.Using route preview
Route guidance
5-19

Black plate (104,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
5-20
Route guidance
1. Highlight [Preview] and push <ENTER>.
2. Highlight the preferred key and push <ENTER> .
: Moves forward in the direction of the
destination.: Moves backward in the direction of
the starting point./
: Pauses the route preview.
3. Push <MAP>to return to the current
location map screen.
INFO:
During route preview, the map scale can be
changed by pushing <ZOOM IN>or<ZOOM
OUT> (if so equipped) . While the map scale is
being changed, the route preview is temporarily
stopped.
Confirming route by simulation
1. Highlight [Simulation] and push <ENTER>.
2. Highlight the preferred key and push <ENTER> .
: Pauses the simulation.: Resumes the simulation.: Ends the simulation.
3. Push <MAP>to return to the current
location map screen.
INFO:
During simulation, the map scale can be
changed by pushing <ZOOM IN>or<ZOOM
OUT> (if so equipped) . While the map scale is
being changed, the simulation is temporarily
stopped.
GUIDANCE SETTINGSVarious guidance settings can be set.
Basic operation1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight the preferred item and push <ENTER> .
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.Available setting items. [Guidance Voice]:
Activates or deactivates voice guidance. The
indicator illuminates if voice guidance is
activated.
. [Guidance Volume]:
Adjust the volume level of voice guidance.
. [Traffic Announcement]:
Provides the announcement of the traffic

Black plate (105,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
information event on the route.
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command. To turn on or off the Voice Guidance:
“Voice Guidance On/Off” (Alternate com-
mand mode)
RECALCULATING ROUTEThe route can be searched for again manually
after changing the search condition. When the
vehicle deviates from the suggested route, the
route from the current location to the destination
is automatically searched again.Re-searching route manually1. Push <ROUTE> . 2. Highlight [Recalculate] and push
<ENTER> .
3. A message is displayed, and the route is
recalculated.4. Set the route conditions. After finishing the
setting, highlight [Start] and push
<ENTER> .
“Procedures after setting destination”
(page 5-2)
INFO:
When a waypoint has been set on the route, the
system will search for only one route even if
route recalculation is performed.
Setting Auto Reroute1. Push <ROUTE> .
2. Highlight [Route Settings] and push <ENTER> .3. Highlight [Other Routing Choices] and push
<ENTER> .
Route guidance
5-21

Black plate (106,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
5-22
Route guidance
4. Highlight [Auto Reroute] and push <ENTER> . The indicator for the selected
condition illuminates. When the current
location map screen or route setting screen
is displayed, the system recalculates a route
with the set conditions.
“Basic operation” (page 5-24)
SETTING DETOUR ROUTETo detour from the suggested route, a route
detouring for a specified distance can be
calculated.
1. Push <ROUTE> .
2. Highlight [Detour] and push <ENTER>.3. Highlight a detour distance and push
<ENTER> .
After calculating the detour, the system displays
the detour route on the map.
INFO:
. When the vehicle has deviated from the
suggested route, [Detour] cannot be se-
lected.
. If the system cannot calculate a detour with
the specified conditions, it displays the
previous suggested route.
. If the vehicle is traveling very fast, the detour
route may start from a location that the
vehicle has already passed.
SEARCHING FOR DETOUR ROUTE
TAKING TRAFFIC INFORMATION INTO
CONSIDERATIONWhen a serious traffic event occurs on the route,
or if the system finds a faster route, a detour alert
will pop up automatically. If the automatic alert is
missed, a detour can also be searched for
manually.1. Push <ROUTE> .
2. Highlight [Traffic Detour] and push <ENTER> .

Black plate (107,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3. When the detour search is successful, detailed information about the detour route
(left screen) and the comparison screen of
the two routes (right screen) are displayed.
*1
Original route (yellow)
*2
Detour route (pink)
*3
The change of distance and estimated
travel time to destination when the
detour route is taken.
4. To accept the suggested detour route, highlight [Yes], and then push <ENTER>.INFO:
. If no route is set, or [Use Real Time Traffic
Information] is turned off, this function
cannot be operated.
. If no detour route is selected and no further
action is provided, the detour route will be
automatically canceled.
. The detour suggestion may be retrieved
even after the message disappears by
manually selecting [Traffic Detour]. The
system will then search for the detour again
and suggests a detour if one is available at
that time.
. Without a subscription to an XM NavTraffic
®
broadcast, it will not be possible to get a traffic detour or apply settings for traffic
information related functions. A message
appears when a related menu item is
selected.
. See “NOTES ON XM NavTraffic
®INFOR-
MATION” for further information.
“Notes on XM NavTraffic
®information”
(page 10-13)
Automatic detour guidanceWhen [Auto Reroute] and [Use Real Time Traffic
Information] are turned on in the detailed route
settings, a message will automatically pop up
when the system finds a detour.
“Detailed route settings” (page 5-24)
1. If a traffic jam or a serious traffic problem occurs on the route while driving along the
suggested route, the automatic detour route
search starts and a message pops up if a
detour is found. 2. To accept the suggested detour route,
highlight [Yes] and push <ENTER>.
INFO:
. If no operation is performed for one minute
after the message is displayed, the message
disappears. The detour will not be accepted,
and the current suggested route will remain
unchanged.
. When the [Traffic Announcement] is turned
on in the guidance settings, the system will
announce voice guidance at the same time
that the message appears on the screen.
“Guidance settings” (page 5-20)
SETTING CONDITIONS FOR ROUTE
CALCULATION
Search condition settingsThe route can be recalculated after changing the
route calculation conditions anywhere along the
route.
Route guidance
5-23

Black plate (108,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
5-24
Route guidance
Basic operation:
1. Push <ROUTE> .
2. Highlight [Route Settings] and push <ENTER> .
3. Highlight [Basic Route Type] and push <ENTER> .
4. Highlight the preferred condition and push <ENTER> . The indicator for the selected
condition illuminates.
5. When the conditions are set, the system starts calculating the route with the new
conditions, and the current location map
screen is displayed.
Available conditions: . [Fastest Route]:
Prioritizes by the fastest time. .
[Minimize Freeway]:
Minimizes the use of motorways.
. [Shortest Route]:
Prioritizes by the shortest route.
INFO:
Only one of these conditions can be utilized at a
time.Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command. To set conditions for the route calculation
(Alternate command mode):
“Fastest Route”
“Minimize Freeway Route”
“Shortest Route”
Detailed route settingsDetailed conditions can be set for the route
calculation.
Basic operation:
1. Push <ROUTE> .
2. Highlight [Route Settings] and push <ENTER> .
3. Highlight [Other Routing Choices] and push <ENTER> .
4. Highlight the preferred condition and push <ENTER> . The indicator for the selected
condition illuminates.
5. If [Route Settings] is exited after changing the settings, the system starts calculating
the route with the new conditions.
Available setting items: . [Minimize Toll Roads]:
Minimizes the use of toll roads.
. [Use Time Restricted Roads]:
Uses any roads subject to time restrictions.

Black plate (109,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
. [Use Statistical Traffic Information]:
Uses statistical traffic information that is
stored in the map data.
. [Use Real Time Traffic Information]:
Uses the latest traffic information received
via the XM broadcast.
. [Use Avoid Area Settings]:
Enables the avoid area setting.
. [Use Ferries]:
Includes the use of ferries.
. [Use Learned Routes]:
Uses the roads that are most frequently
traveled with the help of self-learning
technology.
. [Auto Reroute]:
If the vehicle deviates from the suggested
route, the system automatically recalculates
a route that leads the vehicle to the
suggested route.
INFO:
. The recalculated route may not be the
shortest route because the system priori-
tizes easy-to-drive roads for safety reasons.
. If route conditions are set from [Route
Settings], all sections in the route are subject to the same route conditions even
though different route conditions are set for
different sections in [Edit/Add to Route].
. If [Use Time Restricted Roads] is deacti-
vated, the system calculates a route without
any consideration of the regulations con-
cerning the time or day of the week. There-
fore, the suggested route may include a road
subject to traffic regulations concerning the
time or day of the week. When driving along
the route, always follow all traffic regulations
regardless of whether [Use Time Restricted
Roads] is ON or OFF.
. If the system cannot calculate any alternative
routes, it displays the previous route.
. If the vehicle overly deviates from the
suggested route, the system calculates a
new route.
. Statistical traffic information is based on
previous traffic data. When the traffic situa-
tion rapidly changes due to unexpected
accidents, construction work, traffic restric-
tions, emergencies, etc., the prediction
accuracy of the system may be reduced.
. Traffic jam information displayed on the map
screen is not statistical traffic information. .
When [Use Statistical Traffic Information] is
turned on, the system may lead to a road
where a traffic jam occurs or to a detour
even though the shortest route does not
have a traffic jam.
. Even when [Use Real Time Traffic Informa-
tion] is turned on, if traffic information has
not been provided for the area, sometimes it
is possible that a detour will not be indicated
in a location where a traffic jam occurs.
. The system may not lead to a detour if traffic
closure or a traffic jam occurs far from the
present location.
. The system calculates to reduce the time
required for the entire route from the start to
destination. If there are no appropriate
routes, the system may lead to a route
where a traffic jam occurs instead of leading
to a detour.
. This system can learn and memorize the
route that is most frequently used. However,
despite driving on the same route several
times so that the system can learn the route,
the system may have difficulty learning the
route under the following conditions:
— [Use Time Restricted Roads] is turned on.
Route guidance
5-25

Black plate (110,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
5-26
Route guidance
— [Use Real Time Traffic Information] is turned on. Various guidance information can be set to be
played during route guidance and activate or
deactivate route and/or voice guidance.
BASIC OPERATION1. Push
<SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Guidance Settings] and push <ENTER> .
4. Highlight the preferred item and push <ENTER> .
5. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items. [Guidance Volume]:
Adjusts the volume level of voice guidance.
“Guidance settings” (page 5-20)
. [Guidance Voice]:
Activates or deactivates voice guidance.
The indicator illuminates if voice guidance is
activated.“Guidance settings” (page 5-20)
. [Traffic Announcement]:
Provides an announcement of a traffic
information event on the route.“Guidance settings” (page 5-20)
. [Voice Guidance Settings]:
Sets advanced settings for the voice gui-
dance announced at guide points.“Setting voice guidance at intersec-
tions” (page 5-27)
ROUTE GUIDANCE SETTINGS

Black plate (111,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
. [Guidance Display Settings]:
Activates or deactivates small turn arrow
display on the map.
“Displaying small turn arrow on map”
(page 5-28)
. [Estimated Time]:
Switches the display of estimated travel time
to the destination or waypoint that is
displayed on the map screen.“Switching estimated arrival time dis-
play” (page 5-28)
. [Others]:
— [Set Average Speeds]: Set an average vehicle speed for each
type of road, which is reflected in the
calculation of the required time to the
destination.
“Set average speeds” (page 5-29)
— [Auto Reroute]: If the vehicle deviates from the sug-
gested route, the system automatically
recalculates a route.“Setting Auto Reroute” (page 5-21)
SETTING VOICE GUIDANCE AT IN-
TERSECTIONS1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Guidance Settings] and push <ENTER> .
4. Highlight [Voice Guidance Settings] and push <ENTER> .5. Highlight [Intersection Guidance Settings]
and push <ENTER> .
6. Highlight the preferred item and push
<ENTER> .Available setting items.[Voice Announcements]:
Sets how many times the voice guidance is
announced before the vehicle reaches an
intersection.
1. Highlight [Voice Announcements] and push <ENTER> .
2. Highlight the preferred item and push <ENTER> .
.
[Full]:
The system announces three kinds of
voice guidance: “Turning Point”, “1
Guide” and “2 Guide”.
.
[Concise]:The system announces two kinds of
voice guidance: “Turning Point” and “1
Guide”.
Route guidance
5-27