NISSAN QUEST 2012 RE52 / 4.G 08IT Navigation Manual

Black plate (52,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3-12
Map settings
3. Highlight [Change View] and push the right button of the directional buttons.
4. Highlight the preferred map view and push <ENTER> . The indicator of the selected
map view illuminates.
5. The display automatically returns to the map screen.AVAILABLE VIEWS.[2D map]:
Switches to the 2D map.
. [Birdview (3D)]:
Switches to the Birdview
TM
map.
. [Split: 2D Map]:
Changes to the split screen mode and both
halves display maps in 2D.
. [Split: Birdview
TM
Map]:
Changes to the split screen mode and the
left half displays the map in 2D and the right half displays the map in Birdview
TM.
INFO:
. When the split screen mode is selected, the
map settings for the left screen can be
changed independently.
“Setting left screen display”
(page 3-17)
. If the split screen mode is selected, the
normal map scrolling and scale adjustment
are set in the right screen. However, if an
icon is touched before adjusting the map
direction or scale, then each screen can be
adjusted independently.
Split: 2D Map
Split: Birdview
TMMap
OTHER SETTINGSThe map view can also be set using the
following procedure.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Map View] and push <ENTER>.
4. Highlight [Change View] and push <ENTER> .
5. Highlight the preferred item and push <ENTER> .

Black plate (53,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command.
.
To display the 2D map: “Plan View map” (Alternate command
mode)
.
To display the Birdview
TM
map:
“Birdview map” (Alternate command
mode) Other settings are also available for the map
screen, such as changing the map direction,
map color, Birdview
TM
angle, etc.
BASIC OPERATION1. Push
<ENTER> while the current location
map screen is displayed.2. Highlight [Map View] and push <ENTER>.
3. Highlight [Map Settings] and push
<ENTER> .4. Highlight the preferred item and push
<ENTER> .Available setting items.[Map Orientation]:
Set the map direction to North up or
Heading Up.
“Setting map orientation” (page 3-14)
. [Long Range]:
Set the long range map view display ON/
Map settings
3-13
SETTING THE MAP VIEW

Black plate (54,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3-14
Map settings
OFF.
“Settings long range map view”
(page 3-15)
. [Map Color]:
Change the map color.“Setting map color ” (page 3-15)
. [Birdview Angle]:
Change the Birdview
TM
angle.
“Changing Birdview
TM
angle”
(page 3-16)
. [Left Split Map Settings]:
Set the map settings for the left screen of
the split map.
“Setting left screen display”
(page 3-17)
. [Show all Freeway Exits on Route]/[Auto.
Show Turn List on Freeway]:
Set the display of the freeway exit informa-
tion ON/OFF.“Show exit information on freeways”
(page 5-10)
Other settingsThe orientation of the map can also be set using
the following procedure.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Map View] and push <ENTER>.SETTING MAP ORIENTATIONThe map direction (orientation) can also be
changed in the 2D map. These settings are
available only in the 2D map or 2D/2D split map.
1. Highlight [Map Orientation] and push
<ENTER> .
2. Highlight the preferred map orientation and push <ENTER> . The indicator of the
selected map orientation illuminates.
3. Push <MAP>to return to the current
location map screen.Available map orientations. [North Up]:
North is set at the top of the map.
. [Heading Up]:
The traveling direction is set at the top of the
map.
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.: North Up: Heading Up

Black plate (55,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
North UpHeading Up
INFO:
Touching the icon on the map screen can also
change the direction of the map.Voice command
1. Push <TALK
>located on the steering
wheel switch.
2. After the tone sounds, speak a command. To charge the map direction: “North Up” (Alternate command mode)
“Heading Up” (Alternate command mode)
SETTINGS LONG RANGE MAP VIEWThe position of the vehicle icon can be changed
to view a wider area in the traveling direction. If
this function is activated, the vehicle icon is
located slightly lower than the center of the
screen.1. Highlight [Long Range] and push
<ENTER> . The indicator illuminates.
2. Push <MAP>to return to the current
location map screen.
Long Range Map View
INFO:
[Long Range] is displayed only when [Heading
Up] is selected.
SETTING MAP COLORThe map color can be changed to a warm or
cool color, or a light color to emphasize the
traffic information.1. Highlight [Map Color] and push <ENTER>.
Map settings
3-15

Black plate (56,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3-16
Map settings
2. Highlight the preferred map color and push <ENTER> . The indicator light of the se-
lected color illuminates.Available map colors. [Warm]:
Set warm colors for the map coloring.
. [Cool]:
Set cool colors for the map coloring.
. [Traffic Emphasis]:
Set light colors for the map coloring to
emphasize the traffic information.
INFO:
The effect of setting changes can be confirmed
on the preview displayed on the right side of the
screen.
CHANGING Birdview
TM
ANGLE
The Birdview
TM
angle can be changed.
This setting is available only in the Birdview
TM
map or 2D/Birdview
TM
split map.
1. Highlight [Birdview Angle] and push <ENTER> .
2. Adjust the Birdview
TM
angle using the multi-
function controller.
3. Push <MAP>to return to the current
location map screen.

Black plate (57,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
SETTING LEFT SCREEN DISPLAYWhen the split screen is displayed, the map
settings of the left screen can be changed.1. Highlight [Left Split Map Settings] and push <ENTER> .2. Highlight the preferred map view and push
<ENTER> .
3. Push <MAP>to return to the current
location map screen.
Available setting items. [Map Orientation]:
The map direction can be selected as
follows.
— [North Up]: North is set at the top of the map.
— [Heading Up]: The traveling direction is set at the top of
the map.
. [Long Range]:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
. [Map Scale]:
A scale appears on the left side of the
screen. This changes the scale of a map.
INFO:
. The settings of the right screen are the same
as the settings of the full screen map.
. Touching the icon on the map can also
change the direction and scale of the map. Icons of particular facilities can be displayed on
the map.
DISPLAYING MAP ICONSMap icons can be displayed or hidden by type.1. Push
<ENTER> while the current location
map screen is displayed.2. Highlight [Map Icons] and push <ENTER>.
Map settings
3-17
LOOKING AT INFORMATION ON
THE MAP

Black plate (58,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3-18
Map settings
3. Highlight the preferred icon and push <ENTER> . The icon display setting toggles
between on and off each time <ENTER>is
pushed. The indicator of the selected icon
illuminates.4. Push <MAP>to return to the current
location map screen. The activated icons
are displayed on the map.
INFO:
If registered in the map data, the brand icons will
be displayed on the map instead of the general
map icons listed below.
Map icons that can be displayed.
Restaurant
.Gas Station
.Hotel
.AT M
.Rest Area
Other settingsLandmark icons can also be set using the
following procedure.1. Push <SETTING> .
2. Highlight [Navigation] and push <ENTER>.3. Highlight [Map Icons] and push
<ENTER>.
INFO:
The map icons are not displayed on the map
screen when the map scale is set to 1/4 mile
(500 m) or higher in the 2D map, or to 1 mile (2
km) or higher in Birdview
TM
map.
MAP SCROLLING INFORMATIONInformation about the location, on which the
center of the cross pointer is placed by scrolling
on the map, can be set to be displayed.
1. Push <SETTING> .2. Highlight [Navigation] and push <ENTER>.

Black plate (59,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3. Highlight [Others] and push <ENTER>.4. Highlight [Map Scrolling Information] and
push <ENTER> .
5. Highlight the preferred information item and
push <ENTER> . The indicator of the
selected information item illuminates.
Available information items:
.
[Address Book Icons]
.
[Destination/Waypoint Icons]
.
[Latitude/Longitude Info.]
6. Push <MAP>to return to the current
location map screen. Move the cross pointer
to the set location to display the information.
Map settings
3-19

Black plate (60,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
3-20
Map settings
MAP SYMBOLSThis navigation system uses symbols to display
facilities.

Black plate (61,1)
[ Edit: 2011/ 6/ 13 Model: 08NJ-N ]
ROAD COLORThe road types are differentiated by colors.
Freeway: Red or Light Red (zoomed in)
Main road: Brown or Dark Yellow
Narrow street: Gray
Road with incomplete map data: Dark greenTRAFFIC INFORMATION ON MAPWith a subscription to XM NavTraffic
®service,
traffic information is displayed.
“Viewing available traffic information”
(page 7-3)
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event: Purple
dashed arrow
Traffic information icons:AccidentClosed roadInformationRoad workSlippery roadWeatherIncident
Map settings
3-21