buttons NISSAN QUEST 2016 RE52 / 4.G Quick Reference Guide
Page 18 of 32
16
HEATER AND AIR CONDITIONER (automatic) (if so equipped)
1 AUTO BUTTON 
  
    The auto mode may be used year-round. Press the AUTO  button to turn the system 
on. The system will automatically control the inside temperature (automatic \
cooling 
and/or dehumidified heating), air flow distribution and fan speed.
2  FAN SPEED CONTROL BUTTON
  
    Press the fan speed control button  to manually adjust the fan speed  
down – or up +.
3  DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS 
  
    Press the driver’s side temperature control buttons up  for warmer air or down  
for cooler air.
4  MODE BUTTON
  
  Press the MODE button to cycle through the following air flow outlets:
    
  Air flows from the center and side vents.
    
  Air flows from the center, side and foot vents.
    
  Air flows mainly from the foot vents.
    
  Air flows from the front defroster and foot vents.
5 
PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
  
    Press the passenger’s side temperature control buttons up  for warmer air or 
down 
 for cooler air.
6  DUAL BUTTON
  
   Press  the  D UAL button to turn the passenger’s side temperature controls on or off. 
This will allow the passenger’s side temperature to be adjusted independently from 
the driver’s side by pressing the passenger’s side temperature control buttons.
97810
3
4
5
6
11311122
FIRST DRIVE FEATURES
1964370_16a_Quest_US_pQRG_090215.indd   169/2/15   11:07 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 19 of 32
17
7 AIR RECIRCULATION BUTTON
  
    Press the air recirculation button  to recirculate interior air inside the vehicle. 
The indicator light on the button will illuminate. This system is used to avoid certain 
outside odors and to help adjust the inside vehicle temperature more eff\
ectively.
  
    The air recirculation mode cannot be activated when the climate control s\
ystem is in 
the front defroster mode 
 FRONT or in the front defroster and foot vent mode .
8  AUTO-RECIRCULATION BUTTON
  
    Press the auto-recirculation button  AUTO  to switch to the automatic air intake  
control mode. The indicator light on the button will illuminate.
  
    In this mode, the sensor detects certain odors and gases to automatically switch   
between the air recirculation mode and the outside air circulation mode.\
  
    The auto-recirculation mode cannot be activated when the air flow contr\
ol is in the 
front defroster mode 
 FRONT or in the front defroster and foot outlet mode .
9  DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
  
    Press the front defroster button  FRONT to turn the system on. The A/C 
automatically turns on when the front defroster mode is selected. This feature 
removes humidity from the air.
  
  Press the temperature control buttons  or  to set the desired temperature. 
  
    To defrost the front and side windows quickly, set the temperature controls and fan 
speed controls to their maximum settings.
10 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS (if so equipped)
  
  Push the rear window defroster switch  REAR to turn the system on or off. 
  
  This function automatically turns off after approximately 15 minutes.
11 A/C BUTTON
  
   Press  the  A/C button to turn the air conditioner system on or off. This system helps 
cool and dehumidify the air inside the cabin and defog the windows.
12  REAR BUTTON
  
    To control the rear automatic air conditioning system with the front air \
conditioner 
control panel, press the REAR button.
  
    When the rear automatic air conditioning system is on, the indicator ligh\
t on the 
REAR button will illuminate and the front display 
will switch to the rear air conditioner screen.
  
    To adjust the front air conditioning system, press 
the  REAR button again or wait 10 seconds.
  
    The rear passenger controls are unavailable 
when  REAR is shown on the front display.
13 ON•OFF BUTTON
  
  Press the ON•OFF button to turn the climate control system on or off.
For more information, refer to the “Instruments and controls (section 2)” and the“Monitor, heater, air conditioner, 
audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
1964370_16a_Quest_US_pQRG_090215.indd   179/2/15   11:07 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 20 of 32
18
1
65
3
2
FM/AM/SiriusXM®* SATELLITE RADIO WITH CD/DVD PLAYER 
(if so equipped)
1  ON•OFF BUTTON/VOL (volume) CONTROL KNOB
  
  Press the ON•OFF button to turn the system on or off. 
  
  Turn the VOL  (volume) control knob right or left to increase or decrease the volum\
e.
2 AUDIO BUTTON/TUNE/FOLDER KNOB
  
  Press the AUDIO  button to go to the audio settings screen.
  
  To manually tune the radio, turn the TUNE/FOLDER  knob left or right.
3  SEEK/CAT AND TRACK  BUTTONS
  
    To scan quickly and stop at the previous or next broadcast station, press the  
 SEEK/CAT  button or the TRACK  button.
  
    For satellite radio, press the  SEEK/CAT  button or the TRACK  button to 
switch to the first channel of the previous or next category. 
  
    To change tracks on a CD, press the  SEEK/CAT  button or the  
TRACK 
 button.
  
    To rewind or fast forward a track on a CD, press and hold the  SEEK/CAT  
button or the TRACK 
 button.
4  STATION SELECT BUTTONS
  
    Twelve stations can be set for the FM band, six for the AM band and 18 for  
satellite radio. 
  
    To store a station in a preset, you must first select a radio band by pressing the \
FM•AM button 
5 or XM
 button 6 then tune to the desired FM, AM or satellite 
radio station. 
  
    Next press and hold the desired station select button (1-6) until the sound is 
briefly muted. The channel indicator will then display, and the sound will resume. 
Programing is now complete. 
  
    To retrieve a previously set station, select the radio band where the preset was 
stored then press the corresponding station select button (1-6). 
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional s\
atellite radio subscription service.
For more information, refer to the “Monitor, heater, air conditioner, audio, phone and voice recognition systems 
(section 4)” of your Owner’s Manual.
4
FIRST DRIVE FEATURES
1964370_16a_Quest_US_pQRG_090215.indd   189/2/15   11:07 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 30 of 32
28
HOMELINK® UNIVERSAL TRANSCEIVER (if so equipped)
    The  HomeLink® Universal Transceiver can learn and consolidate the functions of up to 
three different hand-held transmitters, operating items such as garage doors, property 
gates, outdoor and indoor lights or alarm systems.
 
    To program the HomeLink® Universal Transceiver:
    •  Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink 
surface, keeping the HomeLink indicator light in view.
    •  Press and hold the desired HomeLink button and the handheld transmitter \
button 
simultaneously until the HomeLink indicator light flashes slowly and then ra\
pidly.
    •  Both buttons may be released when the indicator light flashes rapidly.
 
    To verify the programing is complete, press and hold the HomeLink button \
and 
observe the indicator light:
    •  A solid, continuous light indicates the programing is complete and the H\
omeLink 
button will activate your device.
    •  A blinking light that turns to a solid, continuous light after 2 seconds\
 indicates 
additional steps are required to complete the programing.
 
    An additional person may make the remaining steps easier. To complete the  
programing process:
    •  At the receiver of the device that you are programing to the HomeLink bu\
tton, press 
and release the learn or smart button (the name may vary by manufacture\
r, but it is 
usually located near where the hanging antenna wire is attached to the unit). You 
have approximately 30 seconds to initiate the following step.
    •  Press and hold the programed HomeLink button for 2 seconds and release.
 
     You may have to repeat the previous two steps up to 3 times to complete t\
he 
programing process. HomeLink should now activate your device. 
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink 
website at www.homelink.com or call 1-800-355-3515.
HOMELINK
SYSTEM GUIDE
1964370_16a_Quest_US_pQRG_090215.indd   289/2/15   11:08 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.