ECU NISSAN X-TRAIL 2011 Manual PDF

Page 339 of 400



> (GLW    0RGHO 7$@
Tires*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepressure withagauge oftenandalways
prior tolong distance trips.Adjust thepressure inall
tires, including thespare, tothe pressure specified.
Check carefully fordamage, cutsorexcessive wear.
Tire rotation*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
In the case thatTwo-Wheel Drive(2WD) andfront &
rear tires aresame size;Tires should berotated every
10,000 km(6,000 miles).
Tires marked withdirectional indicatorscanonly be
rotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatFour-Wheel Drive(4WD) andfront &
rear tires aresame size;Tires should berotated every
5,000 km(3,000 miles).
Tires marked withdirectional indicatorscanonly be
rotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatfront tiresaredifferent sizefrom rear
tires; Tirescannot berotated.
However, thetiming fortire rotation mayvaryaccording
to your driving habitsandtheroad surface conditions.
Tire Pressure Monitoring System(TPMS)trans-
mitter components (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Replace theTPMS transmitter grommetseal,valve
core andcap when thetires arereplaced duetowear
or age. Wheel
alignment andbalance:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the vehicle shouldpulltoeither sidewhile driving on
a straight andlevel road, orifyou detect uneven or
abnormal tirewear, theremaybeaneed forwheel
alignment. Ifthe steering wheelorseat vibrates at
normal highway speeds,wheelbalancing maybe
needed.
Windshield:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Clean thewindshield onaregular basis.Check the
windshield atleast every sixmonths forcracks orother
damage. Repairasnecessary .
Wiper blades*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check forcracks orwear ifnot functioning correctly.
Replace asnecessary .
Inside vehicle
T32A130827-9 2ACDC4E-987C-49DA-8D8E-20CE2 0E92881
The maintenance itemslistedhereshould bechecked
on aregular basis,suchaswhen performing periodic
maintenance, cleaningthevehicle, etc.
Accelerator pedal:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepedal forsmooth operation andmake sure
that thepedal doesnotcatch orrequire uneven effort.
K eep thefloor mats away fromthepedal.
Brake pedal*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepedal forsmooth operation andmake sure
that itis the proper distance fromthefloor matwhen
depressed fully.Check thebrake booster function. Be
sure tokeep thefloor mats away fromthepedal.
Parking brake*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check theparking brakeoperation regularly.Check
that thelever (ifequipped) orthe pedal (ifequipped)
has theproper travel.Alsomake surethatthevehicle is
held securely onafairly steep hillwhen onlythe
parking brakeisapplied. Seat
belts:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatallparts ofthe seat beltsystem (for
example, buckles,anchors, adjusters andretractors)
operate properly andsmoothly ,and areinstalled
securely .Check thebelt webbing forcuts, fraying,
wear ordamage.
Steering wheel:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check forchanges inthe steering condition, suchas
excessive play,hard steering orstrange noises.
Warning lightsandchimes:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatallwarning lightsandchimes are
operating properly.
Windshield defogger:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thattheaircomes outofthe defogger outlets
properly andingood quantity whenoperating the
heater orair conditioner.
Windshield wiperandwasher*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthewipers andwasher operate properly
and that thewipers donot streak.
Under hoodandvehicle
T32A1308 27-7742FF 9D-6320-4F0 D-86C0-408787680914
The maintenance itemslistedhereshould bechecked
periodically (forexample, eachtimeyoucheck the
engine oilorrefuel) .
Battery*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Except formaintenance freebattery ,check thefluid
level ineach cell.Itshould bebetween theªUPPERº
and ªLOWERº lines.Vehicles operated inhigh
temperatures orunder severe conditions require
frequent checksofthe battery fluidlevel.
Maintenan ceand do-it-you rself
8-3
&RQGLWLRQ
([FHSWIRU&KLQD


Page 340 of 400



> (GLW    0RGHO 7$@
8-4
Mainten anceanddo-it-yo urself
Brake andclutch fluidlevel(s)*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
For Manual Transmission (MT)model; makesurethat
the brake andclutch fluidlevels arebetween the
ªMAXº andªMINº linesonthe reservoirs.
Except forManual Transmission (MT)model; make
sure thatthebrake fluidlevel isbetween theªMAXº
and ªMINº linesonthe reservoir.
Coolant level*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thecoolant levelwhen thecoolant iscold. Make
sure thatthecoolant levelisbetween theªMAXº and
ªMINº linesonthe reservoir.
Engine drivebelts*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatdrive belt(s) is/arenotfrayed, worn,
cracked oroily .
Engine oillevel*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thelevel afterparking thevehicle (onalevel
ground) andturning offthe engine.
Fluid leaks:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check underthevehicle forfuel, oil,water orother fluid
leaks afterthevehicle hasbeen parked forawhile.
W ater dripping fromtheairconditioner afteruseis
normal. Ifyou should noticeanyleaks oriffuel fumes
are evident, checkforcause andhave itcorrected
immediately .
Window washerfluid*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthere isadequate fluidinthe reservoir.
MAINTENANCE PRECAUTIONS
T32A130827-1 06C2D29-B070-4D5F-A 2F9-9FBEA1 80F240
When performing anyinspection ormaintenance work
on your vehicle, alwaystakecare toprevent serious
accidental injurytoyourself ordamage tothe vehicle.
The following aregeneral precautions whichshould be
closely observed.
WARNING:
. Park thevehicle onalevel surface, applythe
parking brakesecurely andblock thewheels
to prevent thevehicle frommoving. Move
the shift lever tothe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever tothe ªNº(Neutral) position
(Manual Transmission model).
. Besure theignition switchisin the ªOFFº or
ªLOCKº position whenperforming anyparts
replacement orrepairs.
. Do not work under thehood while the
engine ishot. Always turnoffthe engine
and wait until itcools down.
. Ifyou must workwiththeengine running,
keep yourhands, clothing, hairandtools
away frommoving fans,belts andanyother
moving parts.
. Itis advisable tosecure orremove anyloose
clothing andanyjewelry, suchasrings,
watches, etc.before working onyour vehi-
cle.
. Ifyou must runtheengine inan enclosed
space suchasagarage, besure there is
proper ventilation forexhaust gasesto
escape.
. Never getunder thevehicle whileitis
supported byajack. .
Keep smoking materials, flameandsparks
away fromfuelandthebattery.
. Never connect ordisconnect eitherthe
battery orany transistorized component
connector whiletheignition switchisin the
ªONº position.
. Ongasoline enginemodels withtheMulti-
port Fuel Injection (MFI)system, thefuel
filter andfuel lines should beserviced bya
NISSAN dealerbecause thefuel lines are
under highpressure evenwhen theengine is
turned off.
. Your vehicle isequipped withanautomatic
engine cooling fan.Itmay come onatany
time without warning, evenifthe ignition
switch isin the ªOFFº position andthe
engine isnot running. To avoid injury, always
disconnect thenegative batterycablebefore
working nearthefan.
. Always weareyeprotection wheneveryou
work onyour vehicle.
. Never leavetheengine ortransmission
related component harnessconnector dis-
connected whiletheignition switchisin the
ªONº position.
. Avoid directcontact withused engine oiland
coolant. Improperly disposedengineoil,
engine coolant, and/orothervehicle fluids
can hurt theenvironment. Alwaysconform to
local regulations fordisposal ofvehicle
fluids.
This ª8.Maintenance anddo-it-yourselfº section
provides instructions regardingonlythose itemswhich
are relatively easyforanowner toperform.
Y ou should beaware thatincomplete orimproper
&RQGLWLRQ
([FHSWIRU&KLQD


Page 348 of 400



> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD


Page 349 of 400



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD


Page 357 of 400



> (GLW    0RGHO 7$@
Checking batteryfluidlevel
T32A1308 27-C76024 21-9FE8-4ABF -9401-FDF0 2316F502
DI0137MD
SDI1480D
Check thefluid level ineach cell.Thebattery fluidlevel
should bebetween theUPPER LEVEL
*
1
and
L OWER LEVEL
*
2
lines.
If itis necessary toadd fluid, addonly demineralized/
distilled watertobring thelevel tothe indicator ineach
filler opening. Donot overfill.
1. Remove thecell plugs
*
3
(if equipped) usinga
suitable tool.
2. Add demineralized/distilled wateruptothe
UPPER LEVEL
*
1
line.
If the side ofthe battery isnot clear, check the distilled
waterlevelbylooking directly abovethe
cell; thecondition
*
A
indicates OKand the
condition
*
B
needs moretobe added.
3. Replace andtighten thecell plugs.
. Vehicles operated inhigh temperatures orunder
severe conditions requirefrequent checksofthe
battery fluidlevel.
. Keep thebattery surface cleananddry.Clean the
battery withasolution ofbaking sodaandwater.
. Make certain theterminal connections areclean
and securely tightened.
. Ifthe vehicle isnot tobe used formore than30
days, disconnect thenegative (

Page 358 of 400



> (GLW    0RGHO 7$@
8-22
Maintenance anddo-it-yours elf
.
Make surethatthe+side faces thebottom of
the case
*
B
.
3. Close thelidsecurely .
4. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
INTELLIGENT KEYBATTER Y
T32A130827-0 795585A-4590-40CB-B 4DD-549A1FA4DDE8
Battery replacement
T32A1308 27-C7C6166A -C4F7-4BA4-94AA-A78E88 2D4D47
CAUTION:
. Becareful nottoallow children toswallow
the battery andremoved parts.
. Animproperly disposedbatterycanharm
the environment. Alwaysconfirm localreg-
ulations forbattery disposal.
. When changing batteries, donot letdust or
oil get onthe components.
. There isdanger ofexplosion ifthe lithium
battery isincorrectly replaced.Replaceonly
with thesame orequivalent
type.
JVM0317X
T o replace thebattery:
1. Release thelock knob atthe back ofthe key and
remove themechanical key.(See ªMechanical
keyº (P.3-4) .)
2. Insert aflat-blade screwdriver wrappedwitha
cloth intotheslitofthe corner andtwist itto
separate theupper partfrom thelower part.
3. Replace thebattery withanew one.
.
Recommended battery:CR2032 orequivalent
.
Do not touch theinternal circuitandelectric
terminals asdoing socould cause amalfunc-
tion.
&RQGLWLRQ
([FHSWIRU&KLQD


Page 359 of 400



> (GLW    0RGHO 7$@
.
Make surethatthe+side faces thebottom of
the case.
SDI2452
4. Align thetips ofthe upper andlower parts
*
1
,
and then push them together untilitis securely
closed
*
2
.
5. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation issubject
tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
T32A1308 27-124166 77-0A48-4E6 6-B067-4EB7 C158E2E4
The variable voltagecontrolsystem measures the
amount ofelectrical discharge fromthebattery and
controls voltagegenerated bythe alternator.
CAUTION:
. Do not ground accessories directlytothe
battery terminal. Doingsowill bypass the
variable voltagecontrolsystemandthe
vehicle battery maynotcharge completely.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery.
Maintenance anddo-it-yours elf
8-23
V
ARIABLE VOLTAGE CONTROL
S Y STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD


Page 372 of 400



> (GLW    0RGHO 7$@
8-36
Maintenance anddo-it-yours elf
T32A130 827-06008 459-1ACE- 4E73-93E7-4 A322F46E805
If you have aflat tire, seeªFlat tireº(P.6-2) .
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (ifequipped)
GUID-F 58BF3DF-6 647-4E90-9 8C6-3B8E77 13B953
The Tire Pressure Monitoring System(TPMS) monitors
tire pressure ofall tires except thespare. Whenthelow
tire pressure warninglightislit, one ormore ofyour
tires issignificantly under-inflated.
The TPMS willactivate onlywhen thevehicle isdriven
at speeds above25km/h (16MPH) .Also, thissystem
may notdetect asudden dropintire pressure (for
example aflat tire while driving) .
For more details abouttheTPMS, seeªTire Pressure
Monitoring System(TPMS)º (P.6-2) ,ªTire Pressure
Monitoring System(TPMS)º (P.5-4) andªTire Pressure
Monitoring System(TPMS)º (P.8-36) .
For additional information, seeªLow tirepressure
warning lightº(P.2-14) .
TIRE INFLA TION PRESSURE
T32A130 827-90622 EBC-3A8D-41F6-8B20-6 699CA22E4EE
Periodically checkthepressure ofthe tires, including
the spare. Anincorrect tirepressure mayadversely
affect tirelifeand vehicle handling. Thetirepressure
should bechecked whentiresareCOLD. Tiresare
considered COLDafterthevehicle hasbeen parked
for 3or more hours, ordriven lessthan 1.6km(1mile) .
COLD tirepressures areshown onthe tire placard.
Insufficient pressurecanlead toan overheating ofthe
tire and subsequent internaldamage. Athigh speeds,
this could resultintread separation andeven bursting
of the tire.
TYPES OFTIRES
T32A1308 27-F4ADFA12-B902-4BB7-BDEB -65DF9756DE64
CAUTION:
When changing orreplacing tires,besure all
four tires areofthe same type(that is,summer,
all season orsnow) andconstruction. ANISSAN
dealer maybeable tohelp youwith information
about tiretype, size,speed ratingandavail-
ability.
Replacement tiresmayhave alower speed ratingthan
the factory equipped tires,andthey maynotmatch the
potential maximum vehiclespeed.Neverexceed the
maximum speedratingofthe tire.
All season tires
T32A130827- E671C002-8738-4216-AE C8-6CD14C8720FA
NISSAN specifies allseason tiresonsome models to
provide goodperformance allyear, including snowy
and icyroad conditions. Allseason tiresareidentified
by ALL SEASON and/orM&Sonthe tiresidewall.
Snow tireshave better snowtraction thanallseason
tires andmay bemore appropriate insome areas.
Summer tires
T32A130 827-7935F4 FA-4F3E-416 C-8CF7-BB4 329FCC988
NISSAN specifies summertiresonsome models to
provide superior performance ondry roads. Summer
tire performance issubstantially reducedinsnow and
ice. Summer tiresdonot have thetiretraction rating
M&S onthe tire sidewall.
If you plan tooperate yourvehicle insnowy oricy
conditions, NISSANrecommends theuse ofsnow or
all season tiresonallfour wheels.
Snow tires
T32A130827- D491D99F-25 20-4F05-BD0B-08E3B4DC F929
If snow tiresareneeded, itis necessary toselect tires
equivalent insize andload rating tothe original
equipment tires.Ifyou donot, itcan adversely affect
the safety andhandling ofyour vehicle.
Generally ,snow tireshave lower speed ratings than
factory equipped tiresandmay notmatch thepotential
maximum vehiclespeed.Neverexceed themaximum
speed ratingofthe tire. Ifyou install snowtires,they
must bethe same size,brand, construction andtread
pattern onallfour wheels.
For additional tractiononicy roads, studded tiresmay
be used. However, somestates andprovinces prohibit
their use.Check local,stateandprovincial lawsbefore
installing studdedtires.Skidandtraction capabilities
of studded snowtiresonwet ordry surfaces maybe
poorer thanthatofnon-studded snowtires.
TIRE CHAINS
T32A1308 27-00A7D296-B49D-4E 98-B78C-D04C1A0CDB83
Use oftire chains maybeprohibited accordingto
location. Checkthelocal lawsbefore installing tire
chains. Wheninstalling tirechains, makesurethatthey
are ofproper sizeforthe tires onyour vehicle andare
installed according tothe chain manufacturer's in-
structions.
Use chain tensioners whenrecommended bythe tire
chain manufacturer toensure atight fit.Loose endlinks
of the tire chains mustbesecured orremoved to
prevent thepossibility ofwhipping actiondamage to
the fenders orunderbody .If possible, avoidfully
loading yourvehicle whenusing tirechains. Inaddition,
drive atareduced speed.Otherwise, yourvehicle may
be damaged and/orvehicle handling andperformance
may beadversely affected.
TIRES ANDWHEELS
&RQGLWLRQ
([FHSWIRU&KLQD


Page 383 of 400



> (GLW    0RGHO 7$@
T32A130 827-08881 85C-3AB3- 438A-A155-6D9958BAD12B
Standard Spare
Tire size 225/65R17 Conventional
T155/90 D17*1
225/60 R18 225/65R17*1
T155/90 D17*1
225/55 R19 T155/90D17*1
Size Offsetmm(in)
Road wheel Standard Steel 1767J 45(1.77)
Aluminum 1767J
18 67J
19 67J 45(1.77)
45(1.77)
40(1.57)
Spare Steel 1764T
176 7J 30(1.18)
45(1.77)
*1: Temporary useonly
T32A1308 27-B3B4E7B C-4580-4F9B-A57E-ABEF8DD2A79 A
Unit: mm(in)
Overall length 4,640(182.7)
Overall width 1,820(71.7)
1,830 (72.0)*1
Overall height 1,705(67.1)*2
1,710 (67.3)*3
1,715 (67.5)*4
1,720 (67.7)*5
Front tread 1,575(62.0)
1,585 (62.4)*1
Rear tread 1,575(62.0)
1,585 (62.4)*1
Wheelbase 2,705(106.5)
*1: For225/55 R19tiremodel
*2: ForMexico (without roofrail)
*3: ForAustralia, Philippines, Europe(without roof
rail) ,Ecuador, Chile,Colombia, Peruandthe
Middle East
*4: ForEurope (withroofrail)and Mexico (withroof
rail)
*5: ForThailand andIndonesia
T echnical information
9-7
TIRES
ANDWHEELS DIMENSIONS
&RQGLWLRQ
([FHSWIRU&KLQD


Page:   < prev 1-10 ... 31-40 41-50 51-60 61-70 71-80