battery replacement NISSAN X-TRAIL 2013 Owner´s Manual


> (GLW    0RGHO 7$@
3-8
Pre-d riving checks andadjustments
controller fromthevehicle. Thismayprevent the
unauthorized useofthe remote controller tounlock
the vehicle. Forinformation regardingtheerasing
procedure, contactaNISSAN dealer.
For information regardingthereplacement ofabattery ,
see ªBatteryº (P.8-20) .
USING REMOTEKEYLESS ENTRYSYSTEM
GUID-7F 0F3356-B9 C6-45AC-82 87-8F7116B BEC60
JVP0278X
T ype A(without panicalarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
Battery indicator light
JVP0308X
T ype B(with panic alarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
P ANIC button
*
5
Battery indicator light
Locking doors
GUID-6E92 86B0-733D-456C-B91 3-B3ED645790BA
1. Remove theignition key.
2. Close alldoors.
3. Push theªLOCKº
button
*
2
on the remote
controller.
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate doorhandles toconfirm thatthedoors
have been securely locked.
CAUTION:
After locking thedoors usingtheremote con-
troller, besure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-9E 7A3723-4E10 -44F6-B3CE-C31959B FBFBE
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. Alldoors willbeunlocked.
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº
button
*
3
.
. Opening anydoors.
. Inserting thekey into theignition switch.
Selective doorunlock mode(ifequipped) (Type
A) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
Selective doorunlock mode(ifequipped) (Type
B) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº
button
*
3
. The door unlock mode
can beswitched tothe selective doorunlock mode,
which unlocks thepassenger's doorsatthe second
push ofthe ªUNL OCKº
button
*
3
.
Selective doorunlock mode:
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
T o switch tothe selective doorunlock mode,perform
the following procedure.
Push theªLOCKº
*
2
and ªUNL OCKº
buttons
*
3
simultaneously formore than5seconds.
Perform thesame procedure todeactivate the
selective doorunlock mode.
Interior lighttimer (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The interior lighttimer activates andtheinterior lights
illuminate for15 seconds whenadoor isunlocked and
the interior lightswitch isin the ªDOORº position.
The interior lightscanbeturned offwithout waitingfor
15 seconds byperforming oneofthe following
operations.
. Turning theignition switchtothe ªONº position.
. Locking thedoors withtheremote controller.
. Switching theinterior lightswitch tothe ªOFFº
position.
Using panicalarm(ifequipped)
GUID-AE 80AD4C-8C 1B-4373-A61 8-7751551A5818
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
4
on the remote
controller formore than0.5second.
2. The theft warning alarmwillstay onfor 25
seconds.
3. The panic alarmstops when:
. Ithas runfor25 seconds, or
. Any ofthe buttons onthe remote controller are
pushed. (Note:Panicbutton should bepushed for
more than0.5second.)
Battery indicator light
GUID-661 9AA05-216 E-46A7-A14 9-C4989F148C2E
The battery indicator light
*
4
(T ype A)or
*
5
(T ype B)
illuminates whenyoupush anybutton. Ifthe light does
not illuminate, thebattery isweak orneeds replace-
ment. Forinformation regardingreplacement ofa
battery ,see ªRemote controller batteryº(P.8-21) .
HAZARD INDICATOR OPERA TION
GUID-15B92 5D3-243B-42E9-9D0F-8 48B2E6C9D1D
When youlock orunlock thedoors, thehazard
indicator willflash asaconfirmation.
. ªLOCKº: Thehazard indicator flashesonce.
. ªUNL OCKº: Thehazard indicator flashestwice.
Hazard indicator mode(forSouth AfricaandEurope)
GUID-3F DB20C1-36 93-4948-A81 7-5CA991E3FB28
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-once HAZARD-twice
Hazard indicator mode(except forSouth AfricaandEurope)
GUID-8D3 A1428-9654 -46CD-875F-C1C543C3FC2C
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-twice HAZARD-none
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-12
Pre-driving checksandadjustments
new one.
For information regardingreplacement ofabattery ,see
ªIntelligent Key batteryº (P.8-22) .
Since theIntelligent Key iscontinuously receivingradio
waves, ifthe key isleft near equipment whichtransmits
strong radiowaves, suchassignals fromaTV and
personal computer, thebattery lifemay become
shorter.
Because thesteering wheelislocked electrically (if
equipped) ,unlocking thesteering wheelwiththe
ignition switchinthe ªLOCKº position isimpossible
when thevehicle batteryiscompletely discharged. Pay
special attention thatthevehicle batteryisnot
completely discharged.
As many as4Intelligent Keys can beused withone
vehicle. Forinformation aboutthepurchase anduseof
additional IntelligentKeys, contact aNISSAN dealer.
CAUTION:
. Do not allow theIntelligent Key,which
contains electrical components, tocome
into contact withwater orsalt water. This
could affect thesystem function.
. Donot drop theIntelligent Key.
. Do not strike theIntelligent Keysharply
against another object.
. Donot change ormodify theIntelligent Key.
. Wetting maydamage theIntelligent Key.If
the Intelligent Keygets wet,immediately
wipe untilitis completely dry.
. Do not place theIntelligent Keyforan
extended periodinan area where tempera-
tures exceed 608C(1408F) . .
Ifthe outside temperature isbelow


> (GLW    0RGHO 7$@
USING REMOTEKEYLESS ENTRYFUNC-
TION
GUID-27E5 A408-0CF3-4 029-BFC2-03A4C54 96881
SP A2349
T ype A
SP A2546
T ype B (example)
SP A1926A
T ype C
SP A2561
T ype D
SP A2718
T ype E
*
A
L OCK button
*
B
UNL OCK button
*
C
P ower backdoorbutton (ifequipped)
*
D
P ANIC button (ifequipped)
Operating range
GUID-B36C 97E8-08E8-47EA-82F0 -17A07F11790A
It is possible tolock/unlock alldoors including theback
door using theremote keyless entrysystem. The
operating distancedepends upontheconditions
around thevehicle. To securely operatethelock and
unlock buttons, approach thevehicle toabout 1m (3.3
ft) from thedoor.
The remote keyless entrysystem willnot function under
the following conditions:
. When theIntelligent Key isnot within the
operational range.
. When theIntelligent Key battery isdischarged.
For information regardingthereplacement ofabattery ,
see ªBatteryº (P.8-20) .
Pre-driving checksandadjustments
3-17
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
6-2
In case ofemergency
T32A1308 27-1CA14978 -018C-4DAF-9882-1F9 A0A0A23F 2
SIC2475
The hazard indicator flasherswitchoperates regard-
less ofthe ignition switchposition exceptwhenthe
battery isdischarged.
The hazard indicator flasherisused towarn other
drivers whenyouhave tostop orpark under
emergency conditions.
When thehazard indicator flasherswitchispushed, all
turn signal lightswillflash. To turn offthe hazard
indicator flasher,pushthehazard indicator flasher
switch again.
When animpact thatcould activate thesupplemental
air bags isdetected, thehazard warning flasherlights
blink automatically .If the hazard warning flasherswitch
is pushed, thehazard warning flasherswillturn off.
WARNING:
Do not turn thehazard warning flasherswitchto
off until youcanmake surethatitis safe todo
so. Also, thehazard flasher warning maynot
blink automatically dependingonthe force of
impact.
T32A130827-5 BBC013D-2895-406E -B78D-DB3360F5A392
If you have aflat tire, follow theinstructions asfollows.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (ifequipped)
GUID-5E03 39A0-2DD1- 4BAB-A41C-59B791FC2 152
WARNING:
. Ifthe low tirepressure warninglightillumi-
nates whiledriving, avoidsudden steering
maneuvers orabrupt braking, reducevehicle
speed, pulloffthe road toasafe location
and stop thevehicle assoon aspossible.
Driving withunder-inflated tiresmayperma-
nently damage thetires andincrease the
likelihood oftire failure. Serious vehicle
damage couldoccurandmay lead toan
accident andcould result inserious personal
injury. Check thetire pressure forallfour
tires. Adjust thetire pressure tothe recom-
mended COLDtirepressure shownonthe
tire placard toturn thelow tirepressure
warning lightoff.Ifthe light stillilluminates
while driving afteradjusting thetire pres-
sure, atire may beflat. Ifyou have aflat tire,
replace itwith aspare tire(ifequipped) as
soon aspossible.
. When aspare tireismounted orawheel is
replaced, theTPMS willnotfunction andthe
low tirepressure warninglightwillflash for
approximately 1minute. Thelight willre-
main onafter the1minute. Contact a
NISSAN dealerassoon aspossible fortire
replacement and/orsystem resetting.
. Replacing tireswiththose notoriginally
specified byNISSAN couldaffect theproper
operation ofthe TPMS.
The Tire Pressure Monitoring System(TPMS) monitors
tire pressure ofall tires except thespare. Whenthelow tire
pressure warninglightislit, one ormore ofyour
tires issignificantly under-inflated. Ifthe vehicle is
being driven withlowtirepressure, theTPMS will
activate andwarn youofitby the low tirepressure
warning light(inthe meter panel).This system will
activate onlywhen thevehicle isdriven atspeeds
above 25km/h (16MPH) .
For more details, seeªLow tirepressure warninglightº
(P .2-14) andªTire Pressure Monitoring System
(TPMS)º (P.5-4) .
ST OPPING VEHICLE
T32A1308 27-40DAB50 9-FB3E-4FB9-8C5E-CC9C163BB1F4
WARNING:
. Besure toapply theparking brakefirmly.
. Besure tomove theshift lever tothe ªPº
(Park) position (Continuously Variable
T ransmission model)orthe shift lever to
the ªRº(Reverse) position(ManualTransmis-
sion model) .
. Never change tireswhen thevehicle ison a
slope, iceorslippery area.Thisishazardous.
. Never change tireswhen theoncoming
traffic isclose toyour vehicle. Callfor
professional roadassistance.
1. Safely movethevehicle offthe road away from
traffic.
2. Turn onthe hazard indicator flasherlights.
3. Park onalevel surface.
4. Apply theparking brake.
5. Continuously Variable Transmission (CVT)model:
Move theshift lever tothe ªPº (Park) position.
Manual Transmission (MT)model: Movetheshift
lever tothe ªRº (Reverse) position.
HAZARD INDICATOR FLASHER
SWIT CH FLA
TTIRE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-4
Mainten anceanddo-it-yo urself
Brake andclutch fluidlevel(s)*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
For Manual Transmission (MT)model; makesurethat
the brake andclutch fluidlevels arebetween the
ªMAXº andªMINº linesonthe reservoirs.
Except forManual Transmission (MT)model; make
sure thatthebrake fluidlevel isbetween theªMAXº
and ªMINº linesonthe reservoir.
Coolant level*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thecoolant levelwhen thecoolant iscold. Make
sure thatthecoolant levelisbetween theªMAXº and
ªMINº linesonthe reservoir.
Engine drivebelts*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatdrive belt(s) is/arenotfrayed, worn,
cracked oroily .
Engine oillevel*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thelevel afterparking thevehicle (onalevel
ground) andturning offthe engine.
Fluid leaks:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check underthevehicle forfuel, oil,water orother fluid
leaks afterthevehicle hasbeen parked forawhile.
W ater dripping fromtheairconditioner afteruseis
normal. Ifyou should noticeanyleaks oriffuel fumes
are evident, checkforcause andhave itcorrected
immediately .
Window washerfluid*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthere isadequate fluidinthe reservoir.
MAINTENANCE PRECAUTIONS
T32A130827-1 06C2D29-B070-4D5F-A 2F9-9FBEA1 80F240
When performing anyinspection ormaintenance work
on your vehicle, alwaystakecare toprevent serious
accidental injurytoyourself ordamage tothe vehicle.
The following aregeneral precautions whichshould be
closely observed.
WARNING:
. Park thevehicle onalevel surface, applythe
parking brakesecurely andblock thewheels
to prevent thevehicle frommoving. Move
the shift lever tothe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever tothe ªNº(Neutral) position
(Manual Transmission model).
. Besure theignition switchisin the ªOFFº or
ªLOCKº position whenperforming anyparts
replacement orrepairs.
. Do not work under thehood while the
engine ishot. Always turnoffthe engine
and wait until itcools down.
. Ifyou must workwiththeengine running,
keep yourhands, clothing, hairandtools
away frommoving fans,belts andanyother
moving parts.
. Itis advisable tosecure orremove anyloose
clothing andanyjewelry, suchasrings,
watches, etc.before working onyour vehi-
cle.
. Ifyou must runtheengine inan enclosed
space suchasagarage, besure there is
proper ventilation forexhaust gasesto
escape.
. Never getunder thevehicle whileitis
supported byajack. .
Keep smoking materials, flameandsparks
away fromfuelandthebattery.
. Never connect ordisconnect eitherthe
battery orany transistorized component
connector whiletheignition switchisin the
ªONº position.
. Ongasoline enginemodels withtheMulti-
port Fuel Injection (MFI)system, thefuel
filter andfuel lines should beserviced bya
NISSAN dealerbecause thefuel lines are
under highpressure evenwhen theengine is
turned off.
. Your vehicle isequipped withanautomatic
engine cooling fan.Itmay come onatany
time without warning, evenifthe ignition
switch isin the ªOFFº position andthe
engine isnot running. To avoid injury, always
disconnect thenegative batterycablebefore
working nearthefan.
. Always weareyeprotection wheneveryou
work onyour vehicle.
. Never leavetheengine ortransmission
related component harnessconnector dis-
connected whiletheignition switchisin the
ªONº position.
. Avoid directcontact withused engine oiland
coolant. Improperly disposedengineoil,
engine coolant, and/orothervehicle fluids
can hurt theenvironment. Alwaysconform to
local regulations fordisposal ofvehicle
fluids.
This ª8.Maintenance anddo-it-yourselfº section
provides instructions regardingonlythose itemswhich
are relatively easyforanowner toperform.
Y ou should beaware thatincomplete orimproper
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-22
Maintenance anddo-it-yours elf
.
Make surethatthe+side faces thebottom of
the case
*
B
.
3. Close thelidsecurely .
4. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
INTELLIGENT KEYBATTER Y
T32A130827-0 795585A-4590-40CB-B 4DD-549A1FA4DDE8
Battery replacement
T32A1308 27-C7C6166A -C4F7-4BA4-94AA-A78E88 2D4D47
CAUTION:
. Becareful nottoallow children toswallow
the battery andremoved parts.
. Animproperly disposedbatterycanharm
the environment. Alwaysconfirm localreg-
ulations forbattery disposal.
. When changing batteries, donot letdust or
oil get onthe components.
. There isdanger ofexplosion ifthe lithium
battery isincorrectly replaced.Replaceonly
with thesame orequivalent
type.
JVM0317X
T o replace thebattery:
1. Release thelock knob atthe back ofthe key and
remove themechanical key.(See ªMechanical
keyº (P.3-4) .)
2. Insert aflat-blade screwdriver wrappedwitha
cloth intotheslitofthe corner andtwist itto
separate theupper partfrom thelower part.
3. Replace thebattery withanew one.
.
Recommended battery:CR2032 orequivalent
.
Do not touch theinternal circuitandelectric
terminals asdoing socould cause amalfunc-
tion.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
.
Make surethatthe+side faces thebottom of
the case.
SDI2452
4. Align thetips ofthe upper andlower parts
*
1
,
and then push them together untilitis securely
closed
*
2
.
5. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation issubject
tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
T32A1308 27-124166 77-0A48-4E6 6-B067-4EB7 C158E2E4
The variable voltagecontrolsystem measures the
amount ofelectrical discharge fromthebattery and
controls voltagegenerated bythe alternator.
CAUTION:
. Do not ground accessories directlytothe
battery terminal. Doingsowill bypass the
variable voltagecontrolsystemandthe
vehicle battery maynotcharge completely.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery.
Maintenance anddo-it-yours elf
8-23
V
ARIABLE VOLTAGE CONTROL
S Y STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Remove thefuse boxcover.
4. Pinch thelocking tabs
*
1
found oneach sideof
the extended storagefuseswitch.
5. Pulltheextended storagefuseswitch straight out
from thefuse box
*
2
.
How toremove theextended storagefuse
switch:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. To remove theextended storagefuseswitch, be
sure theignition switchisin the ªOFFº orªLOCKº
position.
2. Besure theheadlight switchisin the ªOFFº
position.
3. Remove thefuse boxcover.
4. Pinch thelocking tabs
*
1
found oneach sideof
the extended storagefuseswitch.
5. Pulltheextended storagefuseswitch straight out
from thefuse box
*
2
.
T32A130 827-A9037D C9-DD9B-4B 9A-BE7E-9036F9796D 86
HEADLIGHTS
T32A130 827-ED0F325 5-CEC5-401B-8EE0-63 DB4CAAD8B3
LED headlight bulb
T32A130827- EAA65B62-0E55-490E- 990B-536AFD F2EB8D
If replacement isrequired, contactaNISSAN dealer.
Halogen headlight bulb
T32A130827- AAC92517-09B4-4636-9E2D-83C41 DBC0FCC
The halogen headlight isasemi-sealed beamtype
which usesreplaceable headlight(halogen) bulbs.
They canbereplaced frominside theengine compart-
ment without removing theheadlight assembly.
CAUTION:
High-pressure halogengasissealed insidethe
bulb. Thebulb maybreak ifthe glass envelope is
scratched orthe bulb isdropped. Low-beam:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0395X
1. Disconnect thebattery negative cable.
2. Disconnect theelectrical connector
*
1
from
the rear endofthe bulb.
3. Remove theheadlight bulb
*
2
by turning it
counter clockwise. Donot shake orrotate the
bulb when removing it.
4. Install thenew bulb inthe reverse orderof
removal.
Maintenance anddo-it-yours elf
8-27
LIGHTS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-28
Maintenance anddo-it-yours elf
High-beam:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0396X
1. Disconnect thebattery negative cable.
2. Turn thecover
*
1
counter clockwise and
remove thecover.
3. Disconnect theelectrical connector
*
2
from
the rear endofthe bulb.
4. Remove theheadlight bulb
*
3
by turning it
counter clockwise. Donot shake orrotate the
bulb when removing it.
5. Install thenew bulb inthe reverse orderof
removal.
CAUTION:
. When handling thebulb, donot touch the
glass envelope.
. Use thesame number andwattage as
originally installed:
Halogen headlight model
High beam bulb:65W(H9)
Low beam bulb:55W(H11)
. Donot leave thebulb outofthe headlight
reflector foralong period oftime asdust,
moisture andsmoke mayenter theheadlight
body andaffect theperformance ofthe
headlight.
Aiming adjustment isnot necessary ifonly thebulbs
are replaced. Whenaiming adjustment isnecessary ,
contact aNISSAN dealer.
Fog may temporarily forminside thelens ofthe exterior
lights inthe rain orinacar wash. Atemperature
difference betweentheinside andtheoutside ofthe
lens causes thefog. This isnot amalfunction. Iflarge
drops ofwater collect insidethelens, contact a
NISSAN dealer.
EXTERIOR LIGHTS
T32A1308 27-CDB84E FB-58D1-403B-9E3B-41 1F1E572715
Item Wattage (W)
Front turnsignal light 21
Front clearance light/Daytime
running light* LED
Front foglight (ifequipped) 55
Side turnsignal light* LED
Rear combination light
T urn signal 21
Stop 21
T ail light 5
Reverse light 16
Rear foglight (ifequipped) 21
High-mounted stoplight* LED
License platelight 5
*: See aNISSAN dealerforreplacement.
&RQGLWLRQ
([FHSWIRU&KLQD