warning NISSAN X-TRAIL 2014 Owners Manual


> (GLW    0RGHO 7$@
5-4
Starting anddriving
EXHAUST GAS(carbon monoxide)
T32A130827- A70640B2-660A-40EC-AACA-9AE67 3CECA70
WARNING:
. Do not breathe exhaust gas;itcontains
colorless andodorless carbonmonoxide.
Carbon monoxide isdangerous. Itcan cause
unconsciousness ordeath.
. Ifyou suspect thatexhaust fumesare
entering thevehicle, drivewithallwindows
fully open, andhave thevehicle inspected
immediately.
. Donot run theengine inclosed spaces such
as agarage.
. Do not park thevehicle withtheengine
running foranextended periodoftime.
. Keep theback doorclosed whiledriving,
otherwise exhaustgascould bedrawn into
the passenger compartment. Ifyou must
drive withtheback dooropen, follow these
precautions:
Ð Open allthe windows.
Ð Turn theairrecirculation modeoffand
set the fanspeed control tothe highest
level tocirculate theair.
. Ifelectrical wiringorother cable connec-
tions mustpasstoatrailer through theseal
of the back doororthe body, follow the
manufacturer's recommendation toprevent
carbon monoxide entryintothevehicle.
. Ifaspecial bodyorother equipment is
added forrecreational orother usage, follow
the manufacturer's recommendation topre-
vent carbon monoxide entryintothevehicle.
(Some recreational vehicleappliances such
as stoves, refrigerators, heaters,etc.may also
generate carbonmonoxide.)
. The exhaust systemandbody should be
inspected byaqualified mechanic whenever:
Ð Your vehicle israised whilebeing ser-
viced.
Ð You suspect thatexhaust fumesare
entering intothepassenger compart-
ment.
Ð You notice achange inthe sound ofthe
exhaust system.
Ð You have hadanaccident involving
damage tothe exhaust system,under-
body, orrear ofthe vehicle.
THREE-W AY CA TAL YST (ifequipped)
T32A1308 27-E3FB65A9 -B2E7-4DF0-9305-1A6 1B5242E01
WARNING:
. The exhaust gasand theexhaust systemare
very hot.Keep people, animals andflam-
mable materials awayfromtheexhaust
system components.
. Do not stop orpark thevehicle over
flammable materialssuchasdry grass,
wastepaper orrags. Theymayignite and
cause afire.
The three-way catalystisan emission controldevice
installed inthe exhaust system.Exhaust gasinthe
three-way catalystisburned athigh temperatures to
help reduce pollutants.
CAUTION:
. Donot use leaded gasoline. (SeeªRecom-
mended Fluids/lubricants andcapacitiesº
(P .9-2) .)Deposits fromleaded gasoline ser- iously
reduce theability ofthe three-way
catalyst tohelp reduce exhaust pollutants
and/or damage thethree-way catalyst.
. Keep yourengine tunedup.Malfunctions in
the ignition, fuelinjection, orelectrical
systems maycause overrich fueltoflow into
the three-way catalyst,causingitto over-
heat. Donot keep driving ifthe engine
misfires, orifnoticeable lossofperformance
or other unusual operating conditions are
detected. Havethevehicle inspected
promptly byaNISSAN dealer.
. Avoid driving withanextremely lowfuel
level. Running outoffuel could cause the
engine tomisfire, damaging thethree-way
catalyst.
. Donot race theengine whilewarming itup.
. Donot push ortow your vehicle tostart the
engine.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (ifequipped)
GUID-B1 F2EA48-882 1-41F0-BDC2-29C235 73CEE3
Each tire,including thespare (ifprovided) ,should be
checked monthlywhencoldandinflated tothe inflation
pressure recommended bythe vehicle manufacturer
on the vehicle placard ortire inflation pressure label.(If
your vehicle hastires ofadifferent sizethan thesize
indicated onthe vehicle placard ortire inflation
pressure label,youshould determine theproper tire
inflation pressure forthose tires.)
As anadded safetyfeature, yourvehicle hasbeen
equipped withaTire Pressure Monitoring System
(TPMS) thatilluminates alow tirepressure telltale
when oneormore ofyour tiresissignificantly under-
inflated. Accordingly ,when thelow tirepressure telltale
illuminates, youshould stopandcheck yourtiresas
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
soon aspossible, andinflate themtothe proper
pressure. Drivingonasignificantly under-inflated tire
causes thetiretooverheat andcanlead totire failure.
Under-inflation alsoreduces fuelefficiency andtire
tread life,and may affect thevehicle's handlingand
stopping ability.
Please notethattheTPMS isnot asubstitute for
proper tiremaintenance, anditis the driver's respon-
sibility tomaintain correcttirepressure, evenifunder-
inflation hasnotreached thelevel totrigger illumination
of the TPMS lowtirepressure telltale.
Y our vehicle hasalso been equipped withaTPMS
malfunction indicatortoindicate whenthesystem is
not operating properly.The TPMS malfunction indica-
tor iscombined withthelow tirepressure telltale.
When thesystem detects amalfunction, thetelltale will
flash forapproximately oneminute andthen remain
continuously illuminated.Thissequence willcontinue
upon subsequent vehiclestart-ups aslong asthe
malfunction exists.Whenthemalfunction indicatoris
illuminated, thesystem maynotbeable todetect or
signal lowtirepressure asintended. TPMSmalfunc-
tions mayoccur foravariety ofreasons, including the
installation ofreplacement oralternate tiresorwheels
on the vehicle thatprevent theTPMS fromfunctioning
properly .Always checktheTPMS malfunction telltale
after replacing oneormore tiresorwheels onyour
vehicle toensure thatthereplacement oralternate tires
and wheels allowtheTPMS tocontinue tofunction
properly .
Additional information
GUID-2100EB 5C-6E9C-4DF0-9BA3-E30F03EA4 592
. The TPMS doesnotmonitor thetirepressure of
the spare tire.
. The TPMS willactivate onlywhen thevehicle is
driven atspeeds above25km/h (16MPH) .Also,
this system maynotdetect asudden dropintire
pressure (forexample aflat tire while driving) .
. The lowtirepressure warninglightmaynot
automatically turnoffwhen thetirepressure is
adjusted. Afterthetireisinflated tothe recom-
mended pressure, resetthetire pressures regis-
tered inyour vehicle andthen drive thevehicle at
speeds above25km/h (16MPH) toactivate the
TPMS andturn offthe low tirepressure warning
light.
. Depending onachange inthe outside tempera-
ture, thelow tirepressure warninglightmay
illuminate evenifthe tire pressure hasbeen
adjusted properly.Adjust thetirepressure tothe
recommended COLDtirepressure againwhen
the tires arecold, andreset theTPMS.
. You can check thepressure ofall tires inthe
vehicle information display.(See ªTrip computerº
(P .2-34) .)
For additional information, seeªLow tirepressure
warning lightº(P.2-14) .
WARNING:
. Ifthe low tirepressure warninglightillumi-
nates whiledriving, avoidsudden steering
maneuvers orabrupt braking, reducevehicle
speed, pulloffthe road toasafe location
and stop thevehicle assoon aspossible.
Driving withunder-inflated tiresmayperma-
nently damage thetires andincrease the
likelihood oftire failure. Serious vehicle damage
couldoccurandmay lead toan
accident andcould result inserious personal
injury. Check thetire pressure forallfour
tires. Adjust thetire pressure tothe recom-
mended COLDtirepressure shownonthe
tire placard toturn thelow tirepressure
warning lightoff.Ifthe light stillilluminates
while driving afteradjusting thetire pres-
sure, atire may beflat. Ifyou have aflat tire,
replace itwith aspare tireassoon as
possible. (SeeªFlat tireº(P.6-2) forchanging
a flat tire.)
. After adjusting thetire pressure, besure to
reset theTPMS. Otherwise, theTPMS will
not warn oflow tirepressure.
. When aspare tireismounted orawheel is
replaced, theTPMS willnotfunction andthe
low tirepressure warninglightwillflash for
approximately 1minute. Thelight willre-
main onafter the1minute. Contact a
NISSAN dealerassoon aspossible fortire
replacement and/orsystem resetting.
. Replacing tireswiththose notoriginally
specified byNISSAN couldaffect theproper
operation ofthe TPMS.
. Donot inject anytireliquid oraerosol tire
sealant intothetires, asthis may cause a
malfunction ofthe tire pressure sensors.
CAUTION:
. The TPMS maynotfunction properly when
the wheels areequipped withtirechains or
the wheels areburied insnow.
. Do not place metalized filmorany metal
parts (antenna, etc.)on the windows. This
may cause poorreception ofthe signals
Starting anddriving
5-5
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-6
Starting anddriving
from thetire pressure sensors,andthe
TPMS willnotfunction properly.
Some devices andtransmitters maytemporarily inter-
fere with theoperation ofthe TPMS andcause thelow
tire pressure warninglighttoilluminate. Someexam-
ples are:
. Facilities orelectric devices usingsimilar radio
frequencies arenear thevehicle.
. Ifatransmitter settosimilar frequencies isbeing
used inor near thevehicle.
. Ifa computer (orsimilar equipment) oraDC/AC
converter isbeing usedinor near thevehicle.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
TPMS resetting
GUID-F7 6622F1-0B9 8-4141-BFE3 -22038209B548
T o keep theTPMS functioning properly,the reset
operation mustbeperformed inthe following cases.
. when thetirepressure isadjusted
. when atire orawheel isreplaced
. when thetires arerotated
Perform thefollowing procedures toreset theTPMS.
1. Park thevehicle inasafe andlevel place.
2. Apply theparking brakeandplace theshift lever in
the ªPº (Park) position.
3. Adjust thetire pressure onallfour tires tothe
recommended COLDtirepressure shownonthe
tire placard. Useatire pressure gaugetocheck
the tirepressure.
4. Place theignition switchinthe ªONº
position.
JVS0434X
Steering-wheel- mountedcontrols(leftside)
5. Use the
switch
*
1
until ªSettingsº appears,
and press ENTER
*
1
.
6. Use the
switch
*
1
until ªTire Pressuresº is
selected, andpress ENTER
*
1
.
7. Use the
switch
*
1
until ªCalibrateº is
selected, andpress ENTER
*
1
. 8.
Use the
switch
*
1
until ªStartº isselected,
and press ENTER
*
1
to reset theTPMS. When
the TPMS resetting starts,themessage ªTPMS
resettingº willbedisplayed.
9. After resetting theTPMS, drivethevehicle for
several minutes atspeeds above25km/h (16
MPH) .
If the low tirepressure warninglightilluminates after
the resetting operation, itmay indicate thattheTPMS
is not functioning properly.Have thesystem checked
by aNISSAN dealer.
For information regardingthelow tirepressure warning
light, seeªLow tirepressure warninglightº(P.2-14) .
DIESEL PARTICULA TEFILTER (DPF) (if
equipped)
GUID-5A9 CD1A0-AAA1 -48F8-8DC8-EB7CA86C2 ADF
WARNING:
. Becareful nottoburn yourself withexhaust
gases.
. Do not park thevehicle overflammable
materials suchasdry grass, wastepaperor
rags, asthey mayburn easily.
. Use thespecified engineoilfor Diesel
Particulate Filter(DPF) equipped models.
For details, seeªRecommended Fluids/lu-
bricants andcapacitiesº (P.9-2) .
CAUTION:
The DPF becomes extremely hotafter burning
particulate matter.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-E3568F A0-1FCD-4E0B-9D9 A-62C1D62A8525
Utility vehicles haveasignificantly higherroll-
over ratethan other types ofvehicles.
They havehigher ground clearance thanpassenger
cars tomake themcapable ofperforming inawide
variety ofon-pavement andoff-road applications. This
gives themahigher center ofgravity thanordinary cars.
An advantage ofhigher ground clearance isabetter
view ofthe road, allowing youtoanticipate problems.
However, theyarenot designed forcornering atthe
same speeds asconventional passengercarsany
more thanlow-slung sportscarsaredesigned to
perform satisfactorily underoff-road conditions. Ifat all
possible, avoidsharp turnsorabrupt maneuvers,
particularly athigh speeds. Aswith other vehicles of
this type, failure tooperate thisvehicle correctly may
result inloss ofcontrol orvehicle rollover.
CAUTION:
. Donot drive ondry hard surface roadsin
LOCK mode.
. Driving ondry hard surface roadsinLOCK
mode maycause unnecessary noiseandtire
wear. NISSAN recommends drivinginthe
2WD orAUT Omode under theseconditions.
(Four-Wheel Drive(4WD) model)
See ªFour-Wheel Drive(4WD)º (P.5-22) formore
details.
T32A1308 27-FAEDCC51-0 3A5-46E8-A1B4-05F8A0ACFCB 0
Driving yourvehicle tofitthe circumstances isessential
for your safety andcomfort. Asadriver, youshould be
the one who knows besthowtodrive inthe given
circumstances.
ENGINE COLDSTART PERIOD
T32A1308 27-423ABF28-182C-45 32-8735-2CF508C400 B5
Due tothe higher engine speeds, whentheengine is
cold, extracaution mustbeexercised whenselecting a
gear during theengine warm-up periodafterstarting
the engine.
L OADING LUGGAGE
T32A130827- F90D098F-7D0F-487B-AF46-661F74A575F1
Loads andtheir distribution andtheattachment of
equipment (couplingdevices,roofluggage carriers,
etc.) willconsiderably changethedriving character-
istics ofthe vehicle. Your driving styleandspeed must
be adjusted according tothe circumstances.
DRIVING INWET CONDITIONS
T32A130827- 9C65E705-D46A-4F87-85ED-94B9DB9A0814
. Avoid accelerating orstopping suddenly.
. Avoid sharpturning orlane changing suddenly.
. Avoid following tooclose tothe vehicle infront.
When watercovers theroad surface withwater
puddles, smallwater streams, etc.,reduce speedto
prevent hydroplaning whichcancause skidding and
loss ofcontrol. Worn tires willincrease thisrisk.
DRIVING INWINTER CONDITIONS
T32A1308 27-707A43B C-7022-449E-80CD-6 02716C03D25
. Drive cautiously .
. Avoid accelerating orstopping suddenly.
. Avoid sharpturning orlane changing suddenly.
. Avoid sudden steering.
. Avoid following tooclose tothe vehicle infront.
T32A130 827-CBF49A 8A-33E0-4B19-A0C4-B073BA66DC FD
WARNING:
Never remove thekey orplace theignition
switch inthe ªLOCKº position whiledriving. The
steering wheelwilllock andcould cause the
driver tolose control ofthe vehicle. Thiscould
result inserious vehicledamage orpersonal
injury.
CONTINUOUSL YVARIABLE TRANSMIS-
SION (CVT)
GUID-605E 0183-46DA-4 BF9-90EB-D63F97C8E 225
JVS0409X
The ignition lockisdesigned sothat theignition switch
cannot beturned tothe ªLOCKº position untiltheshift
lever ismoved tothe ªPº (Park) position. Whenmoving
the ignition switchtothe ªLOCKº position, toremove
the key from theignition switch,makesuretheshift
lever isin the ªPº (Park) position.
When theignition switchcannot beturned tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Turn theignition switchslightly inthe ªONº
direction.
Starting anddriving
5-7
ON-P
AVEMENT ANDOFF-ROA D
DRIVING PRECAUTIONS CARE
WHEN DRIVING IGNITION
SWITCH(model without
intelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
GUID-A467 6F80-7282-4 B00-8821-9F149B55F8E E
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-086 E9D42-2B5 5-4695-AC49-9675494A70E1
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-116 21F56-5195- 4DE6-92E0-5 AFEC5B4DC1F
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation. Some
indicators andwarnings foroperation aredisplayed
on the vehicle information displayand/orinthe meter.
(See ªVehicle information displayº(P.2-20) and
ªW arning/indicator lightsandaudible remindersº
(P .2-12) .)
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle. .
Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
possible. (SeeªJump startingº (P.6-8) .)
Operating range
GUID-6DCA9 273-95BE-404D-9DED-C 3ABB1547B7 E
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent K
ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-48 46178B-012D -41FF-8D9A-4 B56BC7ED0EE
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. ªShift toParkº warning appears onthe vehicle
information displayandachime sounds.
2. Move theshift lever tothe ªPº (Park) position.
3. Push theignition switch.Theignition switchis
switched tothe ªOFFº position.
4. Open thedoor. Theignition switchturnstothe
ªL OCKº position.
For warnings andindicators onthe vehicle information
display ,see ªVehicle information displayº(P.2-20) .
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake pedaldepressed.
Starting anddriving
5-9
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-10
Starting anddriving
STEERING LOCK (ifequipped)
GUID-51 E55D68-F23A-4 B9F-922D-FB2A89F4 61A5
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-DAE59 353-C43A-4135-85E1 -2B9AABDD5 C86
1. Place theignition switchinthe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-38F2C6 E2-71BA-4EB6-AD76-1 DA96CF7E0F3
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe steering lockrelease malfunction
indicator appearsonthe vehicle information
display, pushtheignition switchagainwhile
rotating thesteering wheelslightly tothe
right andleft.
(See ªVehicle information displayº(P.2-20) .)
IGNITION SWITCHPOSITIONS
GUID-16FB F6ED-49B2- 4CD6-9EF9-8B109D501B 73
WARNING:
Never placetheignition switchinthe ªOFFº
position whiledriving. Thesteering wheelmay
lock andcause thedriver tolose control ofthe
vehicle, resulting inserious vehicledamage or
personal injury.
CAUTION:
. Do not leave thevehicle forextended
periods oftime when theignition switchis
in the ªONº position andtheengine isnot
running. Thiscandischarge thebattery.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery. Ifyou must useaccessories while
the engine isnot running, donot use them
for extended periodsoftime anddonot use
multiple electrical accessories atthe same
time.
JVS0394X
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission model)
orthe clutch pedal(Manual Transmission
model) ,the ignition switchwillilluminate.
Push theignition switchcenter:
. once tochange toªONº .
. twotimes tochange toªOFFº .
The ignition switchwillautomatically returntothe
ªL OCKº position whenanydoor iseither opened or
closed withtheswitch inthe OFF position.
L OCK position
GUID-ED5 510B6-7895-4 E20-81E6-DE8C23CAA8 BB
The ignition switchandsteering lock(ifequipped) can
only belocked atthis position.
The ignition switchwilllock when anydoor isopened
or closed withtheignition switched off.
ON position
GUID-185 3F228-2702- 4CE6-858C-9 045EB728323
The ignition systemandtheelectrical accessory power
activate atthis position withouttheengine turnedon.
The ªONº position hasabattery saverfeature thatwill
place theignition switchinthe ªOFFº position, ifthe
vehicle isnot running, aftersome timeunder the
following conditions:
. alldoors areclosed.
. shift lever isin ªPº (Park) position (CVTmodel) or
ªNº (Neutral) position(MTmodel) .
The battery saverfeature willbecancelled ifany ofthe
following occur:
. anydoor isopened.
. shift lever ismoved outofthe ªPº (Park) position.
. ignition switchchanges position.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-5DFB93F9 -CDD2-40A4-B4CA-7AD 7192119CB
DRIVING WITHCONTINUOUSL YVARI-
ABLE TRANSMISSION (CVT)
T32A1308 27-F7C5B DAC-B708- 41F7-9A32-F14C17BDCD AE
The Continuously Variable Transmission (CVT)inyour
vehicle iselectronically controlledtoproduce maximum
power andsmooth operation.
The recommended operatingprocedures forthis
transmission areshown onthe following pages.Follow
these procedures formaximum vehicleperformance
and driving enjoyment.
WARNING:
Do not downshift abruptlyonslippery roads.
This maycause aloss ofcontrol.
CAUTION:
. The cold engine idlespeed ishigh, souse
caution whenshifting thetransmission into
a forward orreverse position beforethe
engine haswarmed up.
. Avoid revving upthe engine whilethe
vehicle isstopped. Thiscould cause unex-
pected vehicle movement.
. Never shifttoeither theªPº (Park) orªRº
(Reverse) positionwhilethevehicle ismov-
ing. This could cause serious damage tothe
transmission.
. Start theengine ineither theªPº (Park) or
ªNº (Neutral) position.Theengine willnot
start inany other position. Ifitdoes, have
your vehicle checked byaNISSAN dealer.
. Except inan emergency, donot shift tothe
ªNº (Neutral) positionwhiledriving. Coast-
ing with thetransmission inthe ªNº (Neutral)
position maycause serious damage tothe transmission.
. Shift intotheªPº (Park) position andapply
the parking brakewhenatastandstill for
longer thanashort waiting period.
. Keep theengine atidling speed while
shifting fromtheªNº (Neutral) positionto
any driving position.
. When stopping thevehicle onanuphill
grade, donot hold thevehicle bydepressing
the accelerator pedal.Thefoot brake pedal
should bedepressed inthis situation.
Starting vehicle
T32A1308 27-E0E8CE2C -3F3F-496A-B326-0ED705AD3FCB
1. After starting theengine, fullydepress thefoot
brake pedalbefore moving theshift lever outofthe
ªPº (Park) position.
2. Keep thefoot brake pedaldepressed andmove
the shift lever toadriving position.
3. Release theparking brake,thefoot brake pedal,
and then gradually startthevehicle inmotion.
The CVT isdesigned sothe foot brake pedal
MUST bedepressed beforeshifting fromtheªPº
(Park) position toany driving position whilethe
ignition switchisin the ªONº position.
The shift lever cannot bemoved outofthe ªPº
(Park) position andinto anyofthe other
positions ifthe ignition switchisplaced inthe
ªLOCKº ,ªOFFº orªACCº position.
CAUTION:
. DEPRESS THEFOOTBRAKE PEDAL-Shift-
ing the shift lever toªDº ,ªDsº ,ªR º, ªL ºor
manual shiftmode without depressing the
foot brake pedalcauses thevehicle tomove
slowly whentheengine isrunning. Make sure
thefoot brake pedalisdepressed fully
and thevehicle isstopped beforeshifting
the shift lever.
. MAKE SUREOFTHE SHIFT LEVER POSI-
TION -Make suretheshift lever isin the
desired position. ªDº,ªDsº ,ªL ºand manual
shift mode areused tomove forward and
ªR ºto back up.
. WARM UPTHE ENGINE -Due tothe higher
idle speeds whentheengine iscold, extra
caution mustbeexercised whenshifting the
shift lever intothedriving position immedi-
ately afterstarting theengine.
Shifting
GUID-668 83E50-62D B-4D0A-AD 0D-64E18A8 E9465
JVS0391X
With manual shiftmode (LHDmodel) (Type A)
Starting anddriving
5-13
DRIVING
VEHICLE
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-14
Starting anddriving
JVS0441X
With manual shiftmode (LHDmodel) (Type B)
SSD0727
Without manualshiftmode (LHD model)
: Push
thebutton
*
A
while depressing the
foot brake
pedal.
: Push
thebutton
*
A
.
: Just
move theshift lever.
WARNING:
. Apply theparking brakeifthe shift lever isin
any position whiletheengine isnot running.
Failure todo socould cause thevehicle to
move unexpectedly orroll away andresult in
serious personal injuryorproperty damage. .
Ifthe shift lever cannot bemoved fromthe
ªPº (Park) position whiletheengine is
running andthefoot brake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause an
accident injuringyourself andothers.
After starting theengine, fullydepress thefoot brake
pedal, pushtheshift lever button andmove theshift
lever outofthe ªPº (Park) position.
If the ignition switchisplaced inthe ªOFFº orªACCº
position forany reason whiletheshift lever isin any
positions otherthantheªPº (Park) position, theignition
switch cannot beplaced inthe ªLOCKº position.
If the ignition switchcannot beplaced inthe ªLOCKº
position, performthefollowing steps:
1. Apply theparking brake.
2. Place theignition switchinthe ªONº position
while depressing thefoot brake pedal.
3. Move theshift lever tothe ªPº (Park) position.
4. Place theignition switchinthe ªLOCKº position.
P (Park) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use thisposition whenthevehicle isparked orwhen
starting theengine. Makesurethatthevehicle is
completely stoppedandmove theshift lever into
the ªPº(Park) position. Applytheparking brake.
When parking onahill, first depress thefoot brake
pedal, applytheparking brake,andthen move theshift
lever intotheªPº (Park) position.
R (Reverse) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use thisposition toback up.Make surethatthevehicle
is completely stoppedbeforeselecting theªRº
(Reverse) position. N
(Neutral) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Neither theforward norreverse gearisengaged. The
engine canbestarted inthis position. You may shift to
the ªNº (Neutral) positionandrestart astalled engine
while thevehicle ismoving.
D (Drive) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use thisposition forallnormal forward driving.
Ds (Drive Sport) (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theshift lever isshifted fromtheªDº (Drive) to
ªDsº (Drive Sport) position, thetransmission entersthe
Ds (Drive Sport) mode.Moving theshift lever tothe
ªDsº (Drive Sport) position allowsyoutoenjoy ªsportyº
driving shiftoperation onawinding roadandfeel
smooth acceleration ordeceleration onahilly road by
moving inalower gearautomatically .Moving theshift
lever forwards andbackwards allowsmanual shifting.
When canceling theDs(Drive Sport) mode,returnthe
shift lever tothe ªDº (Drive) position. Thetransmission
returns tothe normal drivingmode.
L (Low) (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use thisposition whenclimbing steephillsslowly or
driving slowlythrough deepsnow,sand ormud, orfor
maximum enginebraking onsteep downhill grades.
Manual shiftmode
T32A130 827-7DBE3 DA8-E793-455A-A5EF-C 0C301D4126A
When theshift lever isshifted fromtheªDº position to
the manual shiftgate withthevehicle stopped orwhile
driving, thetransmission entersthemanual shiftmode.
Shift ranges canbeselected manually.
In the manual shiftmode, theshift range isdisplayed
on the position indicator inthe meter.
Shift ranges upordown onebyone asfollows:
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-16
Starting anddriving
T ype A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVS0392X
Example
1. Place theignition switchinthe ªOFFº orªLOCKº
position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover(shown inthe
illustration above)usingasuitable tool.
4. Insert themechanical keyand push down theshift
lock release.
5. Press theshift lever button andmove theshift
lever tothe ªNº (Neutral) positionwhileholding
down theshift lockrelease. Replace theremoved
shift lockrelease coveraftertheoperation. T
ype B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVS0466X
1. Place theignition switchinthe ªOFFº orªLOCKº
position.
2. Apply theparking brake.
3. Depress theshift lockrelease button.
4. Press theshift lever button andmove theshift
lever tothe ªNº (Neutral) positionwhileholding
down theshift lockrelease.
Place theignition switchinthe ªONº position to
release thesteering wheellock.
The vehicle maybemoved, bypushing, tothe desired
location.
If the shift lever cannot bemoved outofthe ªPº (Park)
position, haveaNISSAN dealerchecktheCVT system
as soon aspossible.
High fluidtemperature protectionmode
T32A1308 27-808BD 7D2-9BE0-4 70E-A660-24 B385D4FB8A
This transmission hasahigh fluidtemperature protec-
tion mode. Ifthe fluid temperature becomestoohigh
(for example, whenclimbing steepgrades inhigh
temperature withheavy loads),engine powerand,
under someconditions, vehiclespeedwillbede-
creased automatically toreduce thechance of
transmission damage.Vehicle speed canbecontrolled with
theaccelerator pedal,butengine andvehicle
speed maybelimited.
Fail-safe
T32A1308 27-5877C8 5B-EA11-4DD 6-9D52-6992317A74D 5
When thefail-safe operation occurs,theCVT willnot
be shifted tothe selected drivingposition.
If the vehicle isdriven underextreme conditions,
such asexcessive wheelspinning andsubse-
quent hardbraking, thefail-safe systemmaybe
activated. Thiswilloccur evenifall electrical
circuits arefunctioning properly.Inthis case,
turn theignition switchoffand wait for10
seconds. Thenplace theignition switchbackin
the ªONº position. Thevehicle shouldreturnto
its normal operating condition. Ifitdoes not
return toits normal operating condition, havea
NISSAN dealercheckthetransmission and
repair itifnecessary.
WARNING:
When thefail-safe operation occurs,vehicle
speed maybegradually reduced.Thereduced
speed maybelower thanother traffic,which
could increase thechance ofacollision. Be
especially carefulwhendriving. Ifnecessary, pull
to the side ofthe road atasafe place andallow
the transmission toreturn tonormal operation,
or have itrepaired ifnecessary.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
DRIVING WITHMANUAL TRANSMISSION
(MT)
T32A1308 27-F9C2D0 EE-1C88-43FA-80B1 -BC9035D4 5F56
WARNING:
. Donot downshift abruptlyonslippery roads.
This maycause aloss ofvehicle control.
. Donot over-rev theengine whenshifting to
a lower gear.Thismay cause aloss of
vehicle control orengine damage.
CAUTION:
. Donot rest your footonthe clutch pedal
while driving. Thismay damage theclutch
system.
. Fully depress theclutch pedalbefore shift-
ing tohelp prevent transmission damage.
. Stop thevehicle completely beforeshifting
into theªRº(Reverse) position.
. When thevehicle isstopped foraperiod of
time, forexample waitingatstoplights, shift
to the ªNº (Neutral) positionandrelease the
clutch pedalwiththefoot brake pedal
depressed.
. Do not shift tothe ªNº (Neutral) position
while driving. Coasting withthetransmis-
sion inthe ªNº (Neutral) positionmaycause
serious damage tothe transmission.
Starting vehicle
T32A130827- 79841C26-BFA7-47DD-85A1- 81CD1AE3CABD
1. After starting theengine, depress theclutch pedal
to the floor andmove theshift lever tothe ª1º(1st)
or ªRº (Reverse) position.
2. Slowly depress theaccelerator pedal,releasing
the clutch pedalandparking brakeatthe same
time.
Shifting gear
T32A1308 27-BA6FF761 -6916-4D57-ADC5-14 9CCFDB8A1 0
T o change gears,orwhen upshifting ordownshifting,
fully depress theclutch pedal, shiftintotheappropriate
gear, thenslowly andsmoothly releasetheclutch
pedal.
T o ensure smooth gearchanges, fullydepress the
clutch pedalbefore operating theshift lever. Ifthe
clutch pedalisnot fully depressed beforethe
transmission isshifted, agear noise maybeheard.
T ransmission damagecouldoccur.
Start thevehicle inthe ª1º(1st) position andshift to
the ª2º(2nd) ,ª3º (3rd) ,ª4º (4th) ,ª5º (5th) andª6º
(6th) gearinsequence according tothe vehicle speed.
If itis difficult tomove theshift lever intotheªRº
(Reverse) orª1º (1st) position, shifttothe ªNº (Neutral)
position, andthen release theclutch pedalonce.Fully
depress theclutch pedalagainandshift intoªRºorª1º
.
SSD0552
. To back up,stop thevehicle andmove theshift
lever intotheªNº (Neutral) position,andthen pull
the ring
*
1
upward toshift intotheªRº (Reverse)
position.
. The pullring returns toits original position when
the shift lever ismoved tothe ªNº (Neutral)
position.
Suggested maximumspeedineach gear
T32A1308 27-751BC2 BE-4FBE-40E4-87B2-7F6A039719B A
Downshift toalower gearifthe engine isnot running
smoothly ,or ifyou need toaccelerate.
Do not exceed themaximum suggested speed(shown
below) inany gear. Forlevel road driving, usethe
highest gearsuggested forthat speed. Always observe
posted speedlimits,anddrive according tothe road
conditions whichwillensure safeoperation. Donot
over-rev theengine whenshifting toalower gearasit
may cause engine damage orloss ofvehicle control.
MR20DD enginemodel:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
km/h (MPH)
1st 45
(28)
2nd 79
(49)
3rd 110
(68)
4th 143
(89)
5th &6th Ð
(Ð)
Starting anddriving
5-17
&RQGLWLRQ
([FHSWIRU&KLQD