oil NISSAN X-TRAIL 2015 Owner's Manual


> (GLW    0RGHO 7$@
UNDERBOD Y
T32A130 827-BA4803 63-16DC-4809-9936-A44 F5C56CE12
In areas where roadsaltisused inthe winter, itis
necessary toclean thevehicle's underbody regularlyin
order toprevent dirtand saltfrom building upand
causing theacceleration ofcorrosion onthe under-
body andsuspension.
Before thewinter andagain inthe spring, theunder-
seal must bechecked and,ifnecessary ,re-treated.
WHEELS
T32A130 827-1FED 6115-CDF5 -4D29-9D6F-9 78963C17285
. Wash thewheels whenwashing thevehicle to
maintain theirappearance.
. Clean theinner sideofthe wheels whenthewheel
is changed orthe underside ofthe vehicle is
washed.
. Donot use abrasive cleaners whenwashing the
wheels.
. Inspect wheelrimsregularly fordents orcorrosion.
This maycause lossofpressure ordamage the
tire bead.
. NISSAN recommends thattheroad wheels be
waxed toprotect against roadsaltinareas where
it is used during winter.
ALUMINUM ALLOY WHEELS
T32A1308 27-3E219F7 A-1CE4-4AB B-A185-4CD840AD7AF2
W ash thewheels regularly withasponge dampened in
a mild soap solution, especially duringwinterinareas
where roadsaltisused. Thesaltresidue fromroad salt
could discolor thewheels ifit is not washed off
regularly .
CAUTION:
Follow thedirections belowtoavoid staining or
discoloring thewheels: .
Donot use acleaner thatuses strong acidor
alkali contents toclean thewheels.
. Donot apply wheel cleaners tothe wheels
when theyarehot. Thewheel temperature
should bethe same asambient temperature.
. Rinse thewheel tocompletely removethe
cleaner within15minutes afterthecleaner is
applied.
CHROME PARTS
T32A130827- 953BD860-77 FB-4AEF-920D-7A4794 831B88
Clean allchrome partsregularly withanonabrasive
chrome polishtomaintain thefinish.
T32A1308 27-0D28E9 5A-3F1F-45DF -A576-219BF9D83DA 7
Occasionally removeloosedustfrom theinterior trim,
plastic partsandseats using avacuum cleanerorsoft
bristled brush.Wipethevinyl andleather surfaces with
a clean, softcloth dampened inmild soap solution,
then wipe clean withadry ,soft cloth.
Regular careandcleaning isrequired inorder to
maintain theappearance ofthe leather.
Before usinganyfabric protector, readthemanufac-
turer's recommendations. Somefabricprotectors
contain chemicals thatmay stain orbleach theseat
material.
Use asoft cloth dampened onlywith water toclean the
meter andgauge lenscovers.
CAUTION:
. Never usebenzine, thinnerorany similar
material.
. Small dirtparticles canbeabrasive and
damaging toleather surfaces andshould be
removed promptly. Donot use saddle soap,
car waxes, polishes, oils,cleaning fluids,
solvents, detergents orammonia-based
cleaners asthey damage thenatural leather
finish.
. Never usefabric protectors unlessrecom-
mended bythe manufacturer.
. Donot use glass orplastic cleaner onmeter
or gauge lenscovers. Itmay damage the
lens covers.
Appearan ceand care
7-3
CLEANING
INTERIOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8 Maintenance anddo-it-yourself
Maintenance requirements ....
...................................................... ..............8-2
Scheduled maintenance ....
....................................... ...........................8-2
General maintenance ....
............................................ ...........................8-2
Where togo for service ....
....................................... ...........................8-2
General maintenance ....
................................................................ ..............8-2
Explanation ofgeneral maintenance items....
................................. 8-2
Maintenance precautions....
...................................................... ..........8-4
Engine compartment checklocations ....
................................................ 8-5
QR25DE enginemodel....
................................................. ..................8-6
MR20DD enginemodel....
....................................... ...........................8-7
R9M engine model....
............................................ ...............................8-8
Engine cooling system ....
............................................ ...............................8-8
Checking enginecoolant level....
............................................ ..........8-9
Changing enginecoolant ....
...................................................... ..........8-9
Engine oil....
................................................................ ................................8-10
Checking engineoillevel ....
...................................................... .......8-10
Changing engineoiland oilfilter ....
............................................... 8-10
Protect environment ....
........................................................... ...........8-13
Drive belt....
....................................... .......................................................... 8-14
Spark plugs(gasoline enginemodels) ....
........................................... 8-14
Iridium-tipped sparkplugs ....
............................................ ...............8-14
Brakes ....
............................................ .......................................................... 8-15
Checking parkingbrake....
....................................... ........................8-15
Checking footbrake pedal ....
.......................................................... 8-15
Brake booster ....
................................................. ................................8-15
Brake fluid....
................................................. .............................................8-16
Clutch fluid(ifequipped) ....
....................................... ............................8-17
Continuously Variable Transmission (CVT)fluid(ifequipped) ....
.... 8-17
Air cleaner filter....
............................................ .........................................8-17Wiper
blades ....
................................................................ ........................8-18
Windshield wiperblades ....
............................................ ...............8-18
Rear window wiperblade ....
......................................................... 8-19
Window washerfluid....
........................................................... ...............8-19
Battery ............................................................... .........................................8-20
V ehicle battery ....
...................................................... ........................8-20
Remote controller battery....
.......................................................... 8-21
Intelligent Key battery ....
...................................................... ...........8-22
V ariable voltage controlsystem (ifequipped) ....
.............................. 8-23
Fuses ....
...................................................... .................................................8-24
Engine compartment ....
....................................... ............................8-24
Passenger compartment ....
................................................. ...........8-24
Lights ....
............................................ .......................................................... 8-27
Headlights ....
............................................ .........................................8-27
Exterior lights....
....................................... ......................................... 8-28
Interior lights....
................................................. ................................8-29
Light locations ....
...................................................... ........................8-30
Legal requirement toadjust headlight beam....
........................ 8-33
Tires andwheels ....
...................................................... ............................8-36
Tire Pressure Monitoring System(TPMS) (ifequipped) ....
.... 8-36
Tire inflation pressure ....
...................................................... ...........8-36
T ypes oftires ....
....................................... ......................................... 8-36
Tire chains ....
............................................ .........................................8-36
Tire rotation ....
........................................................... ........................8-37
Tire wear anddamage ....
....................................... ........................8-37
Tire age ....
................................................. .........................................8-37
Changing tiresandwheels ....
............................................ ...........8-37
Wheel balance ....
................................................. ............................8-38
Spare tire(ifequipped) ....
...................................................... .......8-38
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Tires*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepressure withagauge oftenandalways
prior tolong distance trips.Adjust thepressure inall
tires, including thespare, tothe pressure specified.
Check carefully fordamage, cutsorexcessive wear.
Tire rotation*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
In the case thatTwo-Wheel Drive(2WD) andfront &
rear tires aresame size;Tires should berotated every
10,000 km(6,000 miles).
Tires marked withdirectional indicatorscanonly be
rotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatFour-Wheel Drive(4WD) andfront &
rear tires aresame size;Tires should berotated every
5,000 km(3,000 miles).
Tires marked withdirectional indicatorscanonly be
rotated between frontandrear.
Make surethatthedirectional indicatorspointinthe
direction ofwheel rotation afterthetire rotation is
completed.
In the case thatfront tiresaredifferent sizefrom rear
tires; Tirescannot berotated.
However, thetiming fortire rotation mayvaryaccording
to your driving habitsandtheroad surface conditions.
Tire Pressure Monitoring System(TPMS)trans-
mitter components (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Replace theTPMS transmitter grommetseal,valve
core andcap when thetires arereplaced duetowear
or age. Wheel
alignment andbalance:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the vehicle shouldpulltoeither sidewhile driving on
a straight andlevel road, orifyou detect uneven or
abnormal tirewear, theremaybeaneed forwheel
alignment. Ifthe steering wheelorseat vibrates at
normal highway speeds,wheelbalancing maybe
needed.
Windshield:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Clean thewindshield onaregular basis.Check the
windshield atleast every sixmonths forcracks orother
damage. Repairasnecessary .
Wiper blades*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check forcracks orwear ifnot functioning correctly.
Replace asnecessary .
Inside vehicle
T32A130827-9 2ACDC4E-987C-49DA-8D8E-20CE2 0E92881
The maintenance itemslistedhereshould bechecked
on aregular basis,suchaswhen performing periodic
maintenance, cleaningthevehicle, etc.
Accelerator pedal:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepedal forsmooth operation andmake sure
that thepedal doesnotcatch orrequire uneven effort.
K eep thefloor mats away fromthepedal.
Brake pedal*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thepedal forsmooth operation andmake sure
that itis the proper distance fromthefloor matwhen
depressed fully.Check thebrake booster function. Be
sure tokeep thefloor mats away fromthepedal.
Parking brake*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check theparking brakeoperation regularly.Check
that thelever (ifequipped) orthe pedal (ifequipped)
has theproper travel.Alsomake surethatthevehicle is
held securely onafairly steep hillwhen onlythe
parking brakeisapplied. Seat
belts:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatallparts ofthe seat beltsystem (for
example, buckles,anchors, adjusters andretractors)
operate properly andsmoothly ,and areinstalled
securely .Check thebelt webbing forcuts, fraying,
wear ordamage.
Steering wheel:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check forchanges inthe steering condition, suchas
excessive play,hard steering orstrange noises.
Warning lightsandchimes:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatallwarning lightsandchimes are
operating properly.
Windshield defogger:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thattheaircomes outofthe defogger outlets
properly andingood quantity whenoperating the
heater orair conditioner.
Windshield wiperandwasher*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthewipers andwasher operate properly
and that thewipers donot streak.
Under hoodandvehicle
T32A1308 27-7742FF 9D-6320-4F0 D-86C0-408787680914
The maintenance itemslistedhereshould bechecked
periodically (forexample, eachtimeyoucheck the
engine oilorrefuel) .
Battery*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Except formaintenance freebattery ,check thefluid
level ineach cell.Itshould bebetween theªUPPERº
and ªLOWERº lines.Vehicles operated inhigh
temperatures orunder severe conditions require
frequent checksofthe battery fluidlevel.
Maintenan ceand do-it-you rself
8-3
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-4
Mainten anceanddo-it-yo urself
Brake andclutch fluidlevel(s)*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
For Manual Transmission (MT)model; makesurethat
the brake andclutch fluidlevels arebetween the
ªMAXº andªMINº linesonthe reservoirs.
Except forManual Transmission (MT)model; make
sure thatthebrake fluidlevel isbetween theªMAXº
and ªMINº linesonthe reservoir.
Coolant level*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thecoolant levelwhen thecoolant iscold. Make
sure thatthecoolant levelisbetween theªMAXº and
ªMINº linesonthe reservoir.
Engine drivebelts*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Make surethatdrive belt(s) is/arenotfrayed, worn,
cracked oroily .
Engine oillevel*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thelevel afterparking thevehicle (onalevel
ground) andturning offthe engine.
Fluid leaks:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check underthevehicle forfuel, oil,water orother fluid
leaks afterthevehicle hasbeen parked forawhile.
W ater dripping fromtheairconditioner afteruseis
normal. Ifyou should noticeanyleaks oriffuel fumes
are evident, checkforcause andhave itcorrected
immediately .
Window washerfluid*:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Check thatthere isadequate fluidinthe reservoir.
MAINTENANCE PRECAUTIONS
T32A130827-1 06C2D29-B070-4D5F-A 2F9-9FBEA1 80F240
When performing anyinspection ormaintenance work
on your vehicle, alwaystakecare toprevent serious
accidental injurytoyourself ordamage tothe vehicle.
The following aregeneral precautions whichshould be
closely observed.
WARNING:
. Park thevehicle onalevel surface, applythe
parking brakesecurely andblock thewheels
to prevent thevehicle frommoving. Move
the shift lever tothe ªPº(Park) position
(Continuously Variable Transmission model)
or the shift lever tothe ªNº(Neutral) position
(Manual Transmission model).
. Besure theignition switchisin the ªOFFº or
ªLOCKº position whenperforming anyparts
replacement orrepairs.
. Do not work under thehood while the
engine ishot. Always turnoffthe engine
and wait until itcools down.
. Ifyou must workwiththeengine running,
keep yourhands, clothing, hairandtools
away frommoving fans,belts andanyother
moving parts.
. Itis advisable tosecure orremove anyloose
clothing andanyjewelry, suchasrings,
watches, etc.before working onyour vehi-
cle.
. Ifyou must runtheengine inan enclosed
space suchasagarage, besure there is
proper ventilation forexhaust gasesto
escape.
. Never getunder thevehicle whileitis
supported byajack. .
Keep smoking materials, flameandsparks
away fromfuelandthebattery.
. Never connect ordisconnect eitherthe
battery orany transistorized component
connector whiletheignition switchisin the
ªONº position.
. Ongasoline enginemodels withtheMulti-
port Fuel Injection (MFI)system, thefuel
filter andfuel lines should beserviced bya
NISSAN dealerbecause thefuel lines are
under highpressure evenwhen theengine is
turned off.
. Your vehicle isequipped withanautomatic
engine cooling fan.Itmay come onatany
time without warning, evenifthe ignition
switch isin the ªOFFº position andthe
engine isnot running. To avoid injury, always
disconnect thenegative batterycablebefore
working nearthefan.
. Always weareyeprotection wheneveryou
work onyour vehicle.
. Never leavetheengine ortransmission
related component harnessconnector dis-
connected whiletheignition switchisin the
ªONº position.
. Avoid directcontact withused engine oiland
coolant. Improperly disposedengineoil,
engine coolant, and/orothervehicle fluids
can hurt theenvironment. Alwaysconform to
local regulations fordisposal ofvehicle
fluids.
This ª8.Maintenance anddo-it-yourselfº section
provides instructions regardingonlythose itemswhich
are relatively easyforanowner toperform.
Y ou should beaware thatincomplete orimproper
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-6
Mainten anceanddo-it-yo urself
QR25DE ENGINEMODEL
GUID-605 79DCB-DED 7-4C83-9E15-6D17D2DCBE76
JVC0580X
1. Engine coolant reservoir
2. Brake fluidreservoir ÐRHD model
3. Engine oilfiller cap
4. Brake fluidreservoir ÐLHD model
5. Aircleaner
6. Battery
7. Window washerfluidreservoir
8. Engine drivebelts 9.
Engine oildipstick
10. Radiator cap
Ð Vehicle overheat
11. Fuse/fusible linkbox
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
MR20DD ENGINEMODEL
GUID-DAC5 19FA-B6D0-4F7 0-A137-166DA9B5D4 3B
JVC0592X
1. Engine coolant reservoir
2. Brake andclutch* fluidreservoir ÐRHD model
3. Brake andclutch* fluidreservoir ÐLHD model
4. Aircleaner
5. Fuse/fusible linkbox
6. Window washerfluidreservoir
7. Engine drivebelts
8. Radiator cap
Ð Vehicle overheat 9.
Engine oildipstick
10. Engine oilfiller cap
11. Battery
*: ForManual Transmission (MT)Model
Maintenan ceand do-it-you rself
8-7
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-8
Mainten anceanddo-it-yo urself
R9M ENGINE MODEL
GUID-73E2 3682-0553-4D66-A576-1CF6FDE4 5B41
JVC0640X
1. Engine coolant reservoir
2. Brake andclutch* fluidreservoir ÐRHD model
3. Engine oilfiller cap
4. Brake andclutch* fluidreservoir ÐLHD model
5. Aircleaner
6. Window washerfluidreservoir
7. Engine drivebelts
8. Engine oildipstick 9.
Battery
10. Fuse/fusible linkbox
*: ForManual Transmission (MT)Model
T32A1308 27-195930 50-B056-4531-8627-E 20FFECA682D
WARNING:
. Never remove theradiator orcoolant reser-
voir capwhen theengine ishot. Serious
burns couldbecaused byhigh-pressure
fluid escaping fromtheradiator. Waituntil
the engine andradiator cooldown.
. Engine coolant ispoisonous andshould be
stored carefully inmarked containers outof
the reach ofchildren.
The engine cooling systemisfilled atthe factory witha
high-quality ,year-round, anti-freezecoolantsolution.
The anti-freeze solutioncontains rustandcorrosion
inhibitors, thereforeadditional coolingsystemadditives
are not necessary .
CAUTION:
. Never useanycooling systemadditives such
as radiator sealer.Additives mayclog the
cooling systemandcause damage tothe
engine, transmission and/orcooling system.
. When adding orreplacing coolant,besure
to use only Genuine NISSANEngineCoolant
or equivalent inits quality withtheproper
mixture ratio.Examples ofthe mixture ratio
of coolant andwater areshown inthe
following table:
ENGINE COOLING SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-10
Maintenance anddo-it-yours elf
T32A1308 27-7FBFDE4 2-D934-4EBF-A456-15EF83DB52F C
CHECKING ENGINEOILLEVEL
T32A1308 27-832AD9AE -E088-46FB-B20C-AC C097451A7F
JVM0423X
QR25 andMR20 engine
JVM0435X
R9M engine
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Remove thedipstick andwipe itclean. 6.
Reinsert thedipstick allthe way.
7. Remove thedipstick andcheck theoillevel. It
should bewithin therange
*
C
.
8. Ifthe oillevel isbelow
*
A
, remove theoilfiller cap
and pour therecommended oilinto theopening.
Do not overfill
*
B
.
When fillingtheengine oil,donot remove
the dipstick.
9. Recheck theoillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -in
period, depending onthe severity ofoperat-
ing conditions.
CAUTION:
The oillevel should bechecked regularly.
Operating yourvehicle withaninsufficient
amount ofoil can damage theengine, andsuch
damage isnot covered bythe warranty.
CHANGING ENGINEOILAND OILFILTER
T32A130827- 17863BB7-3386-4EB2-B54 2-3228E21833C2
WARNING:
. Used oilmust bedisposed ofproperly. Never
pour ordump oilinto theground, canals,
rivers, etc.It should bedisposed ofatproper
waste facilities. NISSANrecommends hav-
ing your oilchanged byaNISSAN dealer.
. Be careful nottoburn yourself, asthe
engine oilmay behot.
. Prolonged andrepeated contactwithused
engine oilmay cause skincancer.
. Avoid directskincontact withused oil.If
contacted, washthoroughly withsoap or hand
cleaner andplenty ofwater assoon as
possible.
. Store usedengine oilinmarked containers
out ofthe reach ofchildren.
V ehicle set-up
GUID-EF 5792C3-0A80 -4BDF-944F-8C21E6 FF05DC
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Raise andsupport thevehicle usingasuitable
floor jackandsafety jackstands.
.
Place thesafety jackstands underthevehicle
jack -up points.
.
A suitable adaptershouldbeattached tothe
jack stand saddle.
6. Remove theplastic engine undercover (if
equipped) .
.
Remove theplastic clipsfromtheundercover.
Engine oiland filter
T32A1308 27-6F86E2B7-D38C-4 534-AFED-674BD03BA210
QR25DE andMR20DD engine:
ENGINE OIL
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD