Window NISSAN X-TRAIL 2016 User Guide


> (GLW    0RGHO 7$@
T32A1308 27-1EE98D4 A-158D-4D39-AA9E-F0 F04B3A53A0
WARNING:
In freezing temperatures, thewasher fluidmay
freeze onthe windshield andobscure your
vision. Warmthewindshield withthedefogger
before youwash thewindshield.
CAUTION:
. Donot operate thewasher continuously for
longer than30seconds.
. Donot operate thewasher ifthe window
washer reservoir isempty.
WINDSHIELD WIPERANDWASHER
SWIT CH
T32A1308 27-2B778B4 5-020B-4A03 -9608-5BA1725AAF A9
JVI0953X
T ype A
JVI0865X
T ype B
JVI0977X
T ype C
JVI0863X
T ype D
The windshield wiperandwasher operate whenthe ignition
switchisin the ªONº position.
Wiper operation
T32A1308 27-D1294B0 D-8236-463B-992C-CBCCBDA2 383A
The lever position ªAUT Oº (Type A/Type C)
*
1
operates therain-sensing autowiper system (if
equipped) .(See ªRain-sensing autowiper systemº
(P .2-48) .)
The lever position
ª
º (INT)
*
1
(T ype B/Type D)
operates thewiper intermittently .
. The intermittent operationcanbeadjusted by
turning theadjustment controlknob,(longer)
*
A
or (shorter)
*
B
.
. The speed ofthe intermittent operationvaries
depending onthe vehicle speed.(ifequipped) .
The lever position
*
2
operates thewiper atlow
speed.
The lever position
*
3
operates thewiper athigh
speed.
T o stop thewiper operation, movethelever uptothe
ªOFFº position.
The lever position
*
4
operates thewiper onesweep.
The lever automatically returnstoits original position.
If the windshield wiperoperation isinterrupted
by snow orice, thewiper maystop moving to
protect itsmotor. Ifthis occurs, turnthewiper
switch tothe ªOFFº position andremove the
snow orice onand around thewiper arms.In
approximately 1minute, turntheswitch onagain
to operate thewiper.
Pulling upthe wiper arm:
The wiper armshould beinthe upposition when
replacing thewiper.
T o pull upthe wiper arm,push thelever
*
4
up twice
(within 0.5seconds) whentheignition switchisin the
ªOFFº position within1minute. Thewiper operation
Instrume ntsand controls
2-47
WIPER
ANDWASHER SWITCH
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
ment.)
REAR WINDOW WIPERANDWASHER
SWIT CH
T32A1308 27-4C617F 31-4B30-425D-87B8-DF9083199 118
JVI0867X
T ype A
JVI0869X
T ype B
The rear window wiperandwasher operates whenthe
ignition switchisin the ªONº position.
Wiper operation
T32A130 827-B8D8 9237-EB4C-4 3BA-832C-691E9613E0F4
The switch position
*
1
operates thewiper intermit-
tently .
The switch position
*
2
operates thewiper atlow
speed.
If the rear window wiperoperation isinterrupted
by snow orice, thewiper maystop moving to
protect itsmotor. Ifthis occurs, turnthewiper
switch tothe ªOFFº position andremove the
snow orice onand around thewiper arms.In
approximately 1minute, turntheswitch onagain
to operate thewiper.
Reverse synchronization function:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thewindshield wiperswitch ison, moving the
shift lever tothe ªRº (Reverse) positionwilloperate the
rear window wiper.
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
W asher operation
T32A1308 27-76F30BB F-65C7-4181-A6A7-B 95992B8E67 9
T o operate thewasher, pushthelever toward thefront
of the vehicle
*
3
until thedesired amountofwasher
fluid isspread onthe windshield. Thewiper will
automatically operateseveraltimes.
T32A1308 27-153D99 46-AD51-4545-B9EB-1 00B3DBFEAE 2
JVI0852X
T ype A (Example)
JVI0853X
T ype B
JVI1009X
T ype C
The defogger switchoperates whentheignition switch
is in the ªONº position.
Instrume ntsand controls
2-49
DEFOGGER
SWITCH
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-50
Instrument sand controls
The defogger isused toreduce themoisture, fogor
frost onthe rear window andoutside doormirror (if
equipped) surfacetoimprove therear view.
When thedefogger switchispushed, theindicator
light
*
A
illuminates andtherear window defogger
operates forapproximately 15minutes. Afterthepreset
time haspassed, thedefogger willturn offautomati-
cally .
T o turn offmanually ,push thedefogger switchagain.
CAUTION:
. When operating thedefogger continuously,
be sure tostart theengine. Otherwise, itmay
cause thebattery todischarge.
. When cleaning theinner sideofthe window,
be careful nottoscratch ordamage the
electrical conductors onthe surface ofthe
window.
NO TE:
When therear defogger isturned on,the Stop/
Start System orIdling StopSystem (ifequipped)
will notbeactivated.
T32A130827- 00D4E9A3-D73F-4C95-82A9-CA964 C18969F
JVI0851X
The horn switch operates regardless ofthe ignition
switch position exceptwhenthebattery isdischarged.
When thehorn switch ispushed andheld, thehorn will
sound. Releasing thehorn switch willcease thehorn
sound.
T32A1308 27-5DF6A5BA -A5E1-4D32-A1B7-F6 FB2C3D4E69
POWER WINDOWS
T32A130827-9 35286CD-5D98-4FE4-91F9-05502 586F0C5
WARNING:
. Make surethatallpassengers havetheir
hands, etc.inside thevehicle beforeoperat-
ing the power windows.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Theycould unknowingly
activate switches orcontrols andinadver-
tently become involved inan accident.
The power windows operatewhentheignition switch
is in the ªONº position.
T o open awindow ,push down thepower window
switch.
T o close awindow ,pull upthe power window switch.
Driver's window switch
T32A130827-A3 DBA208-DFC4-49E6-92A1-F83F1 136BDC1
SIC4522
The driver's switch,themain switch, cancontrol all
windows.
HORN WINDOWS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Locking passenger's windows:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thelock button
*
A
is pushed in,the
passenger's windowscannotbeoperated.
T o cancel thepassenger's windowslock,push thelock
button
*
A
again.
Passenger's windowswitch(ifequipped)
T32A1308 27-1E760836- 570A-4B73-80E9-9AEA1 5B33E1E
SIC4523
The passenger's switchcancontrol itscorresponding
window .
When thepassenger's windowslockbutton onthe
driver's switchispushed in,the passenger's switch
cannot beoperated.
Automatic function
T32A1308 27-D7ACC7 63-0E96-4CE 0-BE1C-FF34F4B3CC 4F
SIC4524
The automatic functionisavailable forthe switch that
has an
mark onitssurface.
The automatic functionenablesawindow tofully open
or close without holding theswitch downorup.
T o fully open thewindow ,push thepower window
switch downtothe second detentandrelease the
switch. To fully close thewindow ,pull thepower
window switchuptothe second detentandrelease
the switch. Theswitch doesnothave tobe held during
window operation.
T o stop thewindow open/close operationduringthe
automatic function,pushdown orpull upthe switch in
opposite directions.
Auto-reverse function:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
WARNING:
There isasmall distance justbefore theclosed
position whichcannot bedetected. Makesure
that allpassengers havetheirhands, etc.inside
the vehicle beforeclosing thewindows.
The auto-reverse functionenablesawindow to
automatically reversewhensomething iscaught in
the window asitis closing bythe automatic function.
When thecontrol unitdetects anobstacle, thewindow
will belowered immediately .
Depending onthe environment ordriving conditions,
the auto-reverse functionmayactivate ifan impact or
load similar tosomething beingcaught inthe window
occurs.
If the window doesnotclose automatically
GUID-1AF 95C11-1513 -41B2-A58D-44F35B4E3E28
If the power window automatic function(closingonly)
does notoperate properly,perform thefollowing
procedure toinitialize thepower window system.
1. Place theignition switchinthe ªONº position.
2. Close thedoor.
3. Open thewindow completely byoperating the
power window switch.
4. Pullthepower window switchandhold itto close
the window ,and then holdtheswitch morethan3
seconds afterthewindow isclosed completely .
5. Release thepower window switch.Operate the
window bythe automatic functiontoconfirm the
initialization iscomplete.
If the power window automatic functiondoesnot
operate properly afterperforming theprocedure above,
have yourvehicle checked byaNISSAN dealer.
Instrume ntsand controls
2-51
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
If sunroof doesnotoperate
T32A1308 27-574BB11 4-4461-4515-9FA9-BE01 BF521E86
If the sunroof andsunshade donot operate properly,
perform thefollowing procedure toinitialize the
operation system.
1. Ifthe sunroof andsunshade areopen, closethem
fully byrepeatedly pushingthesunroof switchto
the CLOSE
*
2
position.
2. Push andhold thesunroof switchtothe CLOSE
*
2
position for10 seconds.
3. After thesunroof andsunshade moveslightly to
the closed position andthen move backalittle,
release thesunroof switch.
4. Push andhold thesunroof switchtothe CLOSE
*
2
position forover 6seconds.
5. Release thesunroof switch.Thesunroof and
sunshade willfully open andthen fullyclose.
6. Check ifthe sunroof switchoperates normally.
If the sunroof doesnotoperate properly afterperform-
ing the procedure above,haveyourvehicle checked by
a NISSAN dealer.
T32A1308 27-F2AA6C F4-E731-425F-BB87-8 8912AD965 5F
JVI0878X
Instrument panel(if equipped)
JVI0880X
Console box
JVI0879X
Cargo area
T o use thepower outlet,pullthecover asillustrated.
CAUTION:
. The outlet andplug maybehot during or
immediately afteruse.
. This power outletisnot designed foruse
with acigarette lighterunit.
. Donot use with accessories thatexceed a12
volt, 120W (10A)power draw.Donot use
double adapters ormore thanoneelectrical
accessory.
. Use thispower outletwiththeengine
running toavoid discharging thevehicle
battery.
. Avoid usingwhentheairconditioner, head-
lights orrear window defogger ison.
. Push theplug inas far asitwill go.Ifgood
contact isnot made, theplug mayoverheat
or the internal temperature fusemayblow.
. Before inserting ordisconnecting aplug, be
sure thattheelectrical accessory beingused
is turned OFF.
. When notinuse, besure toclose thecap. Do
not allow water orany liquid tocontact the
outlet.
Instrume ntsand controls
2-53
POWER
OUTLETS
&RQGLWLRQ
([FHSWIRU&KLQD


 
> (GLW    0RGHO 7$@
Separation mode
GUID-D8B0 EBE7-C574-4 C93-B410-F23DDB5948A A
JVI0943X
1. Place theinner board onthe upper position. (See
ªThree-stage modeº(P.2-58) .)
2. Pull theinner board upward about10cm (4in)
and pullupthe outer board to908.
3. Push down theboard untilitstops.
Luggage underspace (ifequipped)
GUID-21AD 97B2-865B-4777-A3B A-4933A3D 3ACAE
JVI0944X
T wo row model
T o use theluggage underspace, pulloffthe outer
board.
JVI0945X
Three rowmodel
T o use theluggage underspace, pulloffthe board.
COA THOOK
T32A130 827-A5109D D8-D3FB-4704-A791-FE7 CC4BD6 426
SIC3505
The coat hook islocated abovetherear side window
(on thedriver's side).
CAUTION:
Do not apply atotal loadofmore than1kg (2lb)
to the hook.
Instrume ntsand controls
2-59
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OUTSIDE REARVIEW MIRRORS
T32A1308 27-88B732CC-4E0A-4 76C-92A7-0FBBBF5742 F3
WARNING:
. Never touchtheoutside rearview mirrors
while theyareinmotion. Doingsomay pinch
your fingers ordamage themirror.
. Never drivethevehicle withtheoutside
rearview mirrorsfolded.Thisreduces rear
view visibility andmay lead toan accident.
. Objects viewedinthe outside mirrorare
closer thantheyappear (ifequipped) .
. The picture dimensions anddistance inthe
outside mirrorsarenot real.
Adjusting
T32A130 827-51BB26 16-3601-49CE-924F-BB8824381C9 8
JVP0133X
The outside rearview mirrorremote controloperates
when theignition switchisin the ªACCº orªONº
position.
1. Turn theswitch toselect theleftorright mirror
*
1
.
2. Adjust eachmirror bypushing theswitch untilthe
desired position isachieved
*
2
.
Defogging (ifequipped)
T32A130827- 1A2DB6DD-C 4B4-4897-A644-A2C6B1 82286A
The outside rearview mirrorswillbeheated whenthe
rear window defogger switchisoperated.
Folding
GUID-96BDC 7B9-7343-4A 0F-A3F9-0CF6EA2A1 DAF
Remote controltype:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0134X
The outside rearview mirrorremote controloperates
when theignition switchisin the ªACCº orªONº
position.
The outside rearview mirrorsautomatically foldwhen
the outside rearview mirrorfolding switchispushed in.
T o unfold, pushtothe switch again.
CAUTION:
Continuously performingthefold/unfold opera-
tion ofthe outside rearview mirrormaycause
the switch tostop theoperation. Manual
controltype:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0194X
Fold theoutside rearview mirrorbypushing ittoward
the rear ofthe vehicle.
V ANITY MIRROR
T32A130827-2 31ADF9C-8000-48A4-98 23-818818 E5CEE5
SP A1733
T o use thefront vanity mirror, pulldown thesun visor
and pullupthe cover.
Pre-driving checksandadjustments
3-29
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A130827- 864D3105-3368-482B-83 DC-0BF9829189CD
When theshift lever isshifted intotheªRº (Reverse)
position, themonitor displayshowstheview tothe rear
of the vehicle.
The system isdesigned asan aid tothe driver in
detecting largestationary objectstohelp avoid
damaging thevehicle. Thesystem willnotdetect small
objects belowthebumper andmay notdetect objects
close tothe bumper oron the ground.
WARNING:
Failure tofollow thewarnings andinstructions
for proper useofthe RearView Monitorcould
result inserious injuryordeath.
. The RearView Monitorisaconvenience but
it is not asubstitute forproper backing.
Always turnandlook outthewindows, and
check mirrors tobe sure thatitis safe to
move before operating thevehicle. Always
back upslowly.
. The system isdesigned asan aid tothe
driver inshowing largestationary objects
directly behindthevehicle, tohelp avoid
damaging thevehicle.
. The system cannotcompletely eliminate
blind spots andmay notshow every object.
. Underneath thebumper andthecorner
areas ofthe bumper cannotbeviewed on
the RearView Monitorbecause ofits mon-
itoring rangelimitation. Thesystem willnot
show small objects belowthebumper, and
may notshow objects closetothe bumper or
on the ground.
. Objects viewedinthe RearView Monitor
differ fromactual distance becauseawide-
angle lensisused. .
Objects inthe RearView Monitorwillappear
visually opposite thanwhen viewed inthe
rear view andoutside mirrors.
. Make surethattheback doorissecurely
closed whenbacking up.
. Donot putanything onthe rearview camera.
. When washing thevehicle withhigh pres-
sure water, besure nottospray itaround the
camera. Otherwise, watermayenter the
camera unitcausing watercondensation on
the lens, amalfunction, fireoran electric
shock.
. Donot strike thecamera. Itis aprecision
instrument. Otherwise,itmay malfunction or
cause damage resulting inafire oran
electric shock.
CAUTION:
Do not scratch thecamera lenswhen cleaning
dirt orsnow fromthelens.
HOW TO READ DISPLA YEDLINES
GUID-F7 84552C-A F4F-44B5-A7 9F-3127745 C344B
SAA2776
Guiding lineswhich indicate thevehicle widthand distances
toobjects withreference tothe bumper line
*
A
are displayed onthe monitor.
Distance guidelines:
Indicate distances fromthebumper.
. Red line
*
1
: approx. 0.5m(1.5 ft)
. Yellow line
*
2
: approx. 1m (3 ft)
. Green line
*
3
: approx. 2m (7 ft)
. Green line
*
4
: approx. 3m (10 ft)
V ehicle widthguide lines
*
5
:
Indicate thevehicle widthwhenbacking up.
Display screen,heaterandairconditione r,and audio system
4-7
REARVIEW
MONITOR(ifequippe d)
&RQGLWLRQ
([FHSWIRU&KLQD