ECU NISSAN X-TRAIL 2018 User Guide


> (GLW    0RGHO 7$@
secured properly.
. Inspect thelower anchors byinserting your
fingers intothelower anchor areaand
feeling tomake surethere arenoobstruc-
tions overtheISOFIX anchors, suchasseat
belt webbing orseat cushion material. The
child restraint willnotbesecured properly if
the ISOFIX anchors areobstructed.
. Child restraint anchorages aredesigned to
withstand onlythose loadsimposed by
correctly fittedchildrestraints. Underno
circumstance arethey tobe used foradult
seat belts, harnesses orfor attaching other
items orequipment tothe vehicle. Doingso
could damage thechild restraint an-
chorages. Thechild restraint willnotbe
properly installed usingthedamaged an-
chorage, andachild could beseriously
injured orkilled inacollision.
Installation onrear outboard seats
T32A130 827-AE43E95 9-BB5F-4CFD-A4FA-CDEC395 9EDC4
SSS0646A
Steps 1and 2
Front-facing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Be sure tofollow themanufacturer's instructionsfor
the proper useofyour child restraint. Followthese
steps toinstall afront-facing childrestraint onthe
second rowoutboard seatsusing ISOFIX:
1. Position thechild restraint onthe seat
*
1
.
2. Secure thechild restraint anchorattachments to
the ISOFIX loweranchors
*
2
.
3. For Europe (MassgroupI-F2X):
The back ofthe child restraint shouldbesecured
against thevehicle seatback. Thehead restraint
should beremoved toobtain thecorrect child
restraint fit.Store thehead restraint inasecure
place. Besure toinstall thehead restraint when
the child restraint isremoved. (SeeªHead
restraintsº (P.1-7) ,ªUniversal childrestraints for
front seatandrear seatsº (P.1-15) .)
For Europe (except forMass group I-F2X):
Except forEurope:
The back ofthe child restraint shouldbesecured
against thevehicle seatback. Ifnecessary ,adjust
or remove thehead restraint toobtain thecorrect
child restraint fit.Ifthe head restraint isremoved,
store itin asecure place.Besure toinstall the
head restraint whenthechild restraint isremoved.
If the seating position doesnothave anadjustable
head restraint anditis interfering withtheproper
child restraint fit,try another seatingposition ora
different childrestraint. (SeeªHead restraintsº
(P .1-7) ,ªUniversal childrestraints forfront seat
and rear seatsº (P.1-15)
.)
SSS0754A
Step 4
4. Shorten therigid attachment tohave thechild
restraint firmlytightened; pressdownward
*
3
and rearward
*
4
firmly inthe center ofthe child
restraint withyour knee tocompress thevehicle
seat cushion andseatback. Adjustable seatbacks
should bepositioned toensure fullcontact
between childrestraint andseatback.
5. Ifthe child restraint isequipped withatop tether
strap, routethetop tether strapandsecure the
tether straptothe tether anchor point.(SeeªChild
restraint anchorage (forsecond rowseats)º (P.1-
20) .)
6. Ifthe child restraint isequipped withother anti-
rotation devices suchassupport legs,usethem
instead ofthe top tether strapfollowing thechild
restraint manufacturer's instructions.
Safety Ðseats, seatbelts andsupplementa lrestraint system
1-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-22
Safety Ðseats, seatbelts andsupple mental restraint system
SSS0755A
Step 7
7. Test the child restraint beforeyouplace thechild
in it
*
5
. Push thechild restraint fromsidetoside
and tugitforward tomake surethatitis held
securely inplace.
8. Check tomake surethatthechild restraint is
properly securedpriortoeach use.Ifthe child
restraint isloose, repeat steps3through 7.
Rear-facing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
SSS0649A
Steps 1and 2
Be sure tofollow themanufacturer's instructionsfor
the proper useofyour child restraint. Followthese
steps toinstall arear-facing childrestraint onthe
second rowoutboard seatsusing ISOFIX: 1.
Position thechild restraint onthe seat
*
1
.
2. Secure thechild restraint anchorattachments to
the ISOFIX loweranchors
*
2
.
SSS0756A
Step 3
3. Shorten therigid attachment tohave thechild
restraint firmlytightened; pressdownward
*
3
and rearward
*
4
firmly inthe center ofthe child
restraint withyour hand tocompress thevehicle
seat cushion andseatback.
4. Ifthe child restraint isequipped withatop tether
strap, routethetop tether strapandsecure the
tether straptothe tether anchor point.(SeeªChild
restraint anchorage (forsecond rowseats)º (P.1-
20) .)
5. Ifthe child restraint isequipped withother anti-
rotation devices suchassupport legs,usethem
instead ofthe top tether strapfollowing thechild
restraint manufacturer's
instructions.
SSS0757A
Step 6
6. Test the child restraint beforeyouplace thechild
in it
*
5
. Push thechild restraint fromsidetoside
and tugitforward tomake surethatitis held
securely inplace.
7. Check tomake surethatthechild restraint is
properly securedpriortoeach use.Ifthe child
restraint isloose, repeat steps3through 6.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
CHILD RESTRAINT INSTALLA TION USING
3-POINT TYPESEATBEL T
T32A1308 27-A951530 2-9112-4FC5-83E2-EA3AC508586D
Installation onrear seats -without automatic
locking mode
T32A1308 27-96EF54C8 -3581-4C46-8949-7876F5EB6CBB
Front-facing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
SSS0758A
Step 1
Be sure tofollow themanufacturer's instructionsfor
the proper useofyour child restraint. Followthese
steps toinstall afront-facing childrestraint onthe rear
seats using 3-point typeseatbeltwithout automatic
locking mode:
1. Position thechild restraint onthe seat
*
1
.
2. Installation onrear outboard seats(for
Europe (MassgroupIIand III)):
Remove thehead restraint. (SeeªHead restraintsº
(P .1-7) ,ªUniversal childrestraints forfront seat
and rear seatsº (P.1-15) .)
Installation onrear outboard seats(for
Europe (except forMass group IIand III)):
Installation onrear outboard seats(except
for Europe) :
Adjust thehead restraint toits highest position.
(See ªHead restraintsº (P.1-7) ,ªUniversal child restraints
forfront seatandrear seatsº (P.1-15) .)
SSS0493A
Step 3
3. Route theseat belttongue through thechild
restraint andinsert itinto thebuckle
*
2
until you
hear andfeelthelatch engage.
4. To prevent slackinthe seat beltwebbing, itis
necessary tosecure theseat beltinplace with
locking devices attached tothe child
restraint.
SSS0647A
Step 5
5. Remove anyadditional slackfromtheseat belt;
press downward
*
3
and rearward
*
4
firmly in
the center ofthe child restraint withyour knee to
compress thevehicle seatcushion andseatback
while pulling uponthe seat belt. Adjustable seatbacks
shouldbepositioned toensure full
contact between childrestraint and seatback.
SSS0638A
Step 6
6. Test the child restraint beforeyouplace thechild
in it
*
5
. Push thechild restraint fromsidetoside
and tugitforward tomake surethatitis held
securely inplace.
7. Check tomake surethatthechild restraint is
properly securedpriortoeach use.Ifthe child
restraint isloose, repeat steps3through 5.
Rear-facing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
SSS0759A
Step 1
Be sure tofollow themanufacturer's instructionsfor
the proper useofyour child restraint. Followthese
Safety Ðseats, seatbelts andsupplementa lrestraint system
1-23
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-24
Safety Ðseats, seatbelts andsupple mental restraint system
steps toinstall arear-facing childrestraint onthe rear
seats using 3-point typeseatbeltwithout automatic
locking mode:
1. Position thechild restraint onthe seat
*
1
.
SSS0654A
Step 2
2. Route theseat belttongue through thechild
restraint andinsert itinto thebuckle
*
2
until you
hear andfeelthelatch engage.
3. To prevent slackinthe seat beltwebbing, itis
necessary tosecure theseat beltinplace with
locking devices attached tothe child
restraint.
SSS0639A
Step 4
4. Remove anyadditional slackfromtheseat belt;
press downward
*
3
and rearward
*
4
firmly in
the center ofthe child restraint withyour hand to
compress thevehicle seatcushion andseatback
while pulling uponthe seat
belt.
SSS0658A
Step 5
5. Test the child restraint beforeyouplace thechild
in it
*
5
. Push thechild restraint fromsidetoside
and tugitforward tomake surethatitis held
securely inplace.
6. Check tomake surethatthechild restraint is
properly securedpriortoeach use.Ifthe child
restraint isloose, repeat steps3through 5.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-26
Safety Ðseats, seatbelts andsupple mental restraint system
position. (SeeªHead restraintsº (P.1-7) ,ªUniver-
sal child restraints forfront seatandrear seatsº
(P .1-15) .)
4. Position thechild restraint inthe
seat.
SSS0360C
Step 5
5. Route theseat belttongue through thechild
restraint andinsert itinto thebuckle
*
3
until you
hear andfeelthelatch engage.
6. To prevent slackinthe seat beltwebbing, itis
necessary tosecure theseat beltinplace with
locking devices attached tothe child
restraint.
SSS0647B
Step 7
7. Remove anyadditional slackfromtheseat belt;
press downward
*
4
and rearward
*
5
firmly in
the center ofthe child restraint withyour knee to
compress thevehicle seatcushion andseatback
while pulling uponthe seat
belt.
JVR0286X
Step 8(for Europe (MassgroupIIand III))
SSS0302G
Step 8(For Europe (except forMass group IIand III)and
except forEurope)
8. Test the child restraint beforeyouplace thechild
in it
*
6
. Push thechild restraint fromsidetoside
and tugitforward tomake surethatitis held
securely inplace.
9. Check tomake surethatthechild restraint is
properly securedpriortoeach use.Ifthe child
restraint isloose, repeat steps6through 8.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-12
Instrument sand controls
T32A130827- 537914DC-5D30-44AA-8E50-9E9C0 943566D
Anti-lock BrakingSystem(ABS)warning
light
Supplemental RestraintSystem(SRS)air
bag warning light
High beam indicator light
Brake warning light(red)
V ehicle Dynamic Control(VDC)warning
light (except forEurope)/Electronic Stability
Program (ESP)warning light(forEurope)
Hill descent controlsystem onindicator light
(if equipped)
Charge warning light
W ater-in-fuel-filter warninglight(diesel en-
gine model)
Hill Start Assist system onindicator light(if
equipped)
Electric powersteering warninglight
Dipped beamindicator light(ifequipped)
Malfunction IndicatorLight(MIL)
Electronic parkingbrakesystem warning
light (yellow) (ifequipped)
Door lockindicator light(ifequipped)
Rear foglight indicator light(ifequipped)
Electronic parkingbrakewarning light(if
equipped)
ECO mode system indicator light(if
equipped)
Security indicator light
Forward emergency brakingsystemwarning
light (ifequipped)
Four-Wheel Drive(4WD) AUTOindicator
light (4WD model)
Small lightindicator light
Low tirepressure warninglight(ifequipped)
Four-Wheel Drive(4WD) LOCK indicator
light (4WD model)
SPORT modeindicator light(ifequipped)
Malfunction warninglight(red) (diesel en-
gine model)
Front foglights indicator light(ifequipped)
T railer direction indicatorlight(ifequipped)
Master warning light
Front passenger airbag status light(if
equipped)
T urn signals/hazard indicatorlights
Seat beltwarning light
Glow plugindicator light(diesel engine
model)
V ehicle Dynamic Control(VDC)offindicator
light (except forEurope)/Electronic Stability
Program (ESP)offindicator light(forEur-
ope)
Speed [120km/h (75MPH)] warning light
(if equipped)
High beam assist indicator light(if
equipped)
WARNING/IND ICATOR LIGHTS AND
AUDIBLE REMINDERS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-16
Instrument sand controls
. Door/back dooropen warning
. Low fuelwarning
. Release parkingbrakewarning
. Engine startoperation indicator(forContinuously
V ariable Transmission (CVT)models)
. Key System Faultwarning (ifequipped)
. Low Tyre Pressure warning(ifequipped)
. Tyre pressure systemfault(ifequipped)
. CVT System Faultwarning (forContinuously
V ariable Transmission (CVT)models)
. Low oilpressure Stopvehicle warning (if
equipped)
. 4WD system faultwarning (ifequipped)
. 4WD HighTemp. Stopvehicle warning (if
equipped)
. Tyre size incorrect warning(ifequipped)
. Key battery lowwarning (ifequipped)
. Battery Voltage LowCharge Batterywarning
. Headlight systemfaultwarning (ifequipped)
. Chassis controlsystem faultwarning (ifequipped)
. Second rowseat beltwarning (ifequipped)
. Other warning
See ªVehicle information displayº(P.2-20) .
Seat beltwarning light
T32A130 827-9DAB3 AE1-1B41-4E 43-80F5-F5EC8E7B1548
T ype A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The light illuminates whenevertheignition switchis
placed inthe ªONº orªST ARTº position, andwill
remain illuminated untilthedriver's seatbeltis
fastened. Atthe same time,thechime willsound for
about 6seconds unlessthedriver's seatbeltis
securely fastened. T
ype B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theignition switchisin the ªONº position, the
front seatbeltwarning lightonthe meter illuminates.
The light willcontinue toilluminate untilthedriver's
and/or passenger's seatbeltarefastened. (SeeªSeat
beltsº (P.1-9) .)
When thevehicle speedexceeds 15km/h (10MPH) ,
the light willblink andthechime willsound unless the
front seatbeltissecurely fastened. Thechime will
continue tosound forabout 95seconds untiltheseat
belt isfastened. (SeeªSeat beltsº (P.1-9) .)
For second rowseats, seeªVehicle information display
warnings andindicatorsº (P.2-28) .
Speed [120km/h (75MPH)] warning
light (ifequipped)
GUID-9C8 22C2A-6FEF -4D2E-B89C-C3611A9 D7E23
This light blinks whenthevehicle speedgoesover
approximately 120km/h (75MPH) .Be sure toobserve
the speed limitinthe area where youaredriving.
Supplemental RestraintSystem(SRS)
air bag warning light
T32A1308 27-06E124 69-6BF1-45B 8-83C8-E56E6F3BDF4 6
When theignition switchisin the ªONº position, the
Supplemental RestraintSystem(SRS)airbag warning
light illuminates forabout 7seconds andthen turns off.
This indicates theSRS airbag system isoperational.
If any ofthe following conditions occur,theSRS air
bag system and/orpre-tensioner seatbeltneed
servicing. Havethesystem checked, andifnecessary
repaired, byaNISSAN dealerpromptly .
. TheSRS airbag warning lightremains illuminated
after about 7seconds.
. The SRS airbag warning lightflashes intermit-
tently . .
The SRS airbag warning lightdoes notcome on
at all.
Unless checked andrepaired, theSRS airbag system
and/or pre-tensioner seatbeltmay notfunction
properly .(See ªSupplemental RestraintSystem
(SRS)º (P.1-27) .)
V ehicle Dynamic Control(VDC)warn-
ing light (except forEurope)/Electronic Sta-
bility Program (ESP)warning light(for
Europe)
GUID-A6886 B4F-197A-4B65-9BBF -B46494A10 02C
When theignition switchisin the ªONº position, the
V ehicle Dynamic Control(VDC)/Electronic Stability
Program (ESP)warning lightilluminates andthen turns
off.
The warning lightblinks whentheVDC/ESP systemis
operating.
When thewarning lightblinks whiledriving, thedriving
condition isslippery andthevehicle's tractionlimitis
about tobe exceeded.
If the VDC/ESP warninglightilluminates whilethe
engine isrunning orwhile driving, itmay indicate that
the VDC/ESP systemisnot functioning properlyand
may need servicing. Havethesystem checked, andif
necessary repaired,byaNISSAN dealerpromptly .If a
malfunction occurs,theVDC/ESP functionisturned
off, but thevehicle isstill drivable. (SeeªVehicle
Dynamic Control(VDC)/Electronic StabilityProgram
(ESP) systemº (P.5-26) .)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-18
Instrument sand controls
High beam assist indicator light(if
equipped)
GUID-50 DB9FD6-A5 BA-4734-B4 8F-5B6262B 538DF
The indicator lightilluminates whentheheadlights
come onwhile theheadlight switchisin the ªAUT Oº
position withthehigh beam selected. Thisindicates
that thehigh beam assist system isoperational. (See
ªHeadlight andturn signal switchº (P.2-39) .)
High beam indicator light
T32A1308 27-409109 9F-CB07-4 276-B667-3BD074F2E 546
The high beam indicator lightilluminates whenthe
headlight highbeam ison. The indicator turnsoffwhen
the low beam isselected. (SeeªHeadlight andturn
signal switchº (P.2-39) .)
Hill descent controlsystem onindicator
light (ifequipped)
T32A130 827-28B7FC 03-C4D5-4C6 C-8BFA-9E756 1E98498
When theignition switchisplaced inthe ªONº position
the hilldescent controlsystem onindicator light
illuminates brieflyandthen turns off.This indicates
that thehilldescent controlsystem isoperational.
The light illuminates whenthehilldescent control
system isactivated.
If the hilldescent controlswitchison and theindicator
light blinks, thesystem isnot engaged.
If the indicator lightdoes notilluminate orblink when
the hilldescent controlswitchison, the system may
not befunctioning properly.Have thesystem checked
by aNISSAN dealer.
For additional information, seeªHill descent control
systemº (P.5-30) .
Hill Start Assist system onindicator
light (ifequipped)
GUID-5D3BB 4C2-B651-4D95-98B6-BBF04E320 8E8
The light illuminates whentheconditions ofthe hillstart
assist system aresatisfied whenthevehicle isstopped
on ahill.
Then, thelight blinks whenthebrake pedalisreleased,
which indicates thatthehillstart assist system is
activated.
For additional information, seeªHill Start Assist
systemº (P.5-30) .
Malfunction IndicatorLight(MIL)
T32A1308 27-5D3C46 85-4828-40 4C-A15D-A0 C96B37A7ED
CAUTION:
. Continuing vehicleoperation withoutproper
servicing ofthe engine control systemand/
or Continuously Variable Transmission (CVT)
could leadtopoor driveability, reducedfuel
economy, anddamage tothe engine control
system and/orCVTsystem, whichmayaffect
the vehicle's warranty coverage.
. Incorrect settingofthe engine control sys-
tem may lead tonon-compliance oflocal
and national emission lawsandregulations.
When theignition switchisin the ªONº position, the
Malfunction IndicatorLight(MIL) illuminates. After
starting theengine, theMIL turns off.This indicates
that theengine control system and/orCVTsystem is
operational.
If the MIL illuminates whiletheengine isrunning, itmay
indicate thattheengine control system isnot
functioning properlyandmay need servicing. Have
the vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly . If
the MIL blinks (ifequipped) whiletheengine is
running, itmay indicate apotential malfunction inthe
emission controlsystem. Inthis case, theemission
control system maynotfunction properly andmay need
servicing. Havethesystem checked, andifnecessary
repaired, byaNISSAN dealerpromptly .
Precautions:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o reduce oravoid possible damagetothe engine
control system whentheMIL blinks:
. Avoid driving atspeeds above70km/h (43MPH) .
. Avoid sudden acceleration ordeceleration.
. Avoid goingupsteep uphillgrades.
. Avoid carrying ortowing unnecessary loads.
Rear foglight indicator light(if
equipped)
GUID-3BE98C 0D-E553-453A-8DD7-D10 AB9D1576E
The rear foglight indicator lightilluminates whenthe
rear foglight ison. (See ªFog lightswitchº (P.2-45) .)
Security indicator light
T32A130 827-CAB130 D8-5BB2-4700-9816-9 655A9AA77 D6
The security indicator lightblinks whentheignition
switch isin the ªLOCKº ,ªOFFº position. Thisfunction
indicates thesecurity system* equipped onthe vehicle
is operational. (*immobilizer)
If security systemismalfunctioning, thislight will
remain onwhile theignition switchisin the ªONº
position. (SeeªSecurity systemº(P.3-20) foradditional
information.)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Small lightindicator light
T32A1308 27-952927 B8-E86D-40 A0-ADA2-5ED657B0A 0DE
The light illuminates whentheheadlight switchis
turned to
the
position.
SPORT modeindicator light(if
equipped)
GUID-49D 371AC-80 67-4316-8AB D-88BA45B995CE
The SPORT modeindicator lightilluminates whenthe
SPORT modeisturned ªONº.(See ªDriving with
Continuously Variable Transmission (CVT)º(P.5-13)
for the use ofthe SPORT modeswitch.)
T railer direction indicatorlight(if
equipped)
GUID-588 27E84-89C9 -468A-8CE3-E00B748 76BDA
The light willilluminate whenever anadditional
electrical loadisdetected bythe direction indicator
system.
For additional information, seeªTrailer towing (for
Australia, NewZealand, SouthAfricaandEurope)º
(P .5-52) .
T urn signals/hazard indicatorlights
T32A1308 27-AEE83761-686F-46 6B-B3B8-EDF8D7DC0 C36
The turn signals/hazard indicatorlightsblinkwhen the
turn signal switch orhazard indicator flasherswitchis
turned on.(See ªHeadlight andturn signal switchº
(P .2-39) orªHazard indicator flasherswitchº (P.6-2) .)
V ehicle Dynamic Control(VDC)off
indicator light(except forEurope)/Electronic
Stability Program (ESP)offindicator light(for
Europe)
GUID-10 C0347A-5993 -4CEC-84D6-C6D36D4 E64D2
When theignition switchisin the ªONº position, the
V ehicle Dynamic Control(VDC)/Electronic Stability
Program (ESP)offindicator lightilluminates andthen
turns off.
The VDC/ESP offindicator lightilluminates whenthe
VDC/ESP offswitch ispushed tothe ªOFFº position.
When theVDC/ESP offswitch ispushed tothe ªOFFº
position, theVDC/ESP systemisturned off.
For details, seeªVehicle Dynamic Control(VDC)/
Electronic StabilityProgram (ESP)systemº (P.5-26) .
AUDIBLE REMINDERS
T32A1308 27-39FBB3 CF-11CD-4D A8-9DB3-FBA F4F2E2596
Brake padwear warning
T32A1308 27-2C378ED 7-F157-4822 -BCF0-6E95CAA4B880
The disc brake padshaveaudible wearwarnings.
When abrake padrequires replacement, itwill make a
high pitched scraping soundwhenthevehicle isin
motion. Thisscraping soundwillfirst occur onlywhen
the brake pedalisdepressed. Aftermore wearofthe
brake pad,thesound willalways beheard evenifthe
brake pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe wear warning
sound isheard.
Have thesystem checked, andifnecessary repaired,
by aNISSAN dealerpromptly .(See ªBrakesº (P.8-
15) .)
Intelligent Key buzzer (ifequipped)
T32A130 827-4A0804 B9-235D-48CF-8FEE-2 4C2BB97CE26
The Intelligent Key buzzer sounds ifany one ofthe
following improperoperations isfound.
. The ignition switchisnot returned tothe ªLOCKº
position whenlocking thedoors.
. The Intelligent Key isleft inside thevehicle when
locking thedoors.
. Any doors arenot closed securely whenlocking
the doors.
When thebuzzer sounds, besure tocheck boththe
vehicle andtheIntelligent Key .(See ªIntelligent Key
systemº (P.3-10) .)
Light reminder chime
T32A1308 27-6F4DC6 D7-A8DC-4 6E9-8460-5 5E269AD82 EA
The chime willsound ifthe driver's sidedoor isopened
while theheadlight switchisin either the
or
position andtheignition switchisin the ªOFFº or
ªL OCKº position.
Be sure toturn thelight switch tothe ªOFFº orªAUT Oº
(if equipped) positionwhenyouleave thevehicle.
Parking brakereminder chime
T32A130 827-0DD91 978-046D-4BBA-9DC9-E 4F062F1D5B0
The chime willsound ifthe vehicle isdriven atmore
than 7km/h (4MPH) (models notequipped with
electronic parkingbrake)or4km/h (2MPH) (models
equipped withelectronic parkingbrake)withthe
parking brakeapplied. Stopthevehicle andrelease
the parking brake.
Instrume ntsand controls
2-19
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-22
Instrument sand controls
. Moving Object
Ð Moving ObjectDetection (MOD)ON/OFF
. Front Sensor
Ð Front parking sensorON/OFF
. Rear Sensor
Ð Rear parking sensorON/OFF
. Display
Ð Parking sensordisplay ON/OFF
. Volume
Ð Parking sensorbuzzervolume Low/Med./High
. Range
Ð Parking sensordetection rangeFar/Mid./Near
For additional information, seeªAround viewmonitorº
(P .4-10) .
Chassis Control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªChassis
Controlº menu,usethe
switch
*
1
to select
and theENTER
*
1
to change amenu item:
. Trace Control
Ð See ªActive Trace Controlº (P.5-28) formore
information.
. Engine Brake(ifequipped)
Ð See ªActive Engine Brake(Continuously Vari-
able Transmission (CVT)models)º (P.5-28) for
more information.
Clock
GUID-5AF 46434-303 8-4E05-B84D-77316D A0684E
T o set the clock, seeªClockº (P.4-6) orªAudio
settingsº (P.4-58) inthis manual orthe separate
Navigation Owner'sManual.
Display Settings
GUID-72E3 9564-A9E2-43D0-9D 53-676FFB0D 1A09
The meter settings allowsthecustomer tochoose from
the various meterselections.
The meter settings canbechanged usingthe
*
1
and theENTER
*
1
buttons.
Contents Selection:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The items thatdisplay whentheignition switchis
placed inthe ªONº position canbeenabled/disabled.
T o change theitems thataredisplayed, usethe
*
1
to scroll andtheENTER
*
1
to select amenu item.
Body Colour:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The color ofthe vehicle thatdisplays inthe vehicle
information displaywhentheignition switchisplaced
in the ªONº position canbechanged.
1. Use the
switch
*
1
until ªBody Colourº is
selected, andpress ENTER
*
1
.
2. Select thebody color using the
switch
*
1
and press ENTER
*
1
. ECO
Mode Settings (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer tochange theECO
mode system settings.
Use the
switch
*
1
until ªECO ModeSettingsº is
selected, andpress ENTER
*
1
.
ECO Glow:
This setting allowsthecustomer toenable/disable the
ambient ECOindicator inthe vehicle information
display .
1. Use the
switch
*
1
to select ªECO Glowº.
2. Press theENTER
*
1
to turn ON/OFF the
ambient ECOinthe vehicle information display.
Display:
JVI0665X
This setting allowsthecustomer toenable/disable the
ECO pedal guide function.
1. Use the
switch
*
1
to select ªDisplayº .
2. Press theENTER
*
1
to select ªPedal Guideº or
ªFuel econ.º .
For detailed information, seeªECO modesystemº
(P .5-47) .
&RQGLWLRQ
([FHSWIRU&KLQD